Important Safety Information
Please read and understand all safety instructions before using the FLEXISPOT XCT2 Sleeper Chair Bed.
- Keep away from open flames or high heat sources.
- Supervise children and pets to avoid entrapment risks.
- Do not place any objects that can overheat, such as laptops or heaters, on or near the USB ports.
- Keep liquids away from USB ports and cup holders to prevent electrical shorts.
Product Overview
The FLEXISPOT XCT2 is a versatile 3-in-1 convertible sleeper chair bed designed for various living spaces. It functions as a supportive armchair, a comfortable lounger, and a flat sleeper bed. Key features include integrated USB charging ports, dual cup holders, and side storage pockets.
Image: The FLEXISPOT XCT2 Sleeper Chair Bed demonstrating its three functional modes: supportive armchair, chaise lounge, and flat sleeper bed.
Setup and Assembly
The FLEXISPOT XCT2 Sleeper Chair Bed requires some assembly. All necessary tools are included. It is recommended to assemble the unit in the room where it will be used due to its size and weight.
Unpacking
- Carefully open the packaging and remove all components.
- Verify that all parts listed in the included assembly guide are present.
- Place components on a soft, clean surface to prevent scratches.
Assembly Steps
Follow the detailed instructions provided in the separate assembly manual included with your product. The general process involves attaching the backrest, armrests, and legs to the main seat frame. The pull-out bed mechanism is pre-assembled.
Image: Visual guide illustrating the four simple steps to convert the armchair into a sleeper bed.
Note: Some users have reported minor issues with screw alignment during assembly. If you encounter difficulties, ensure all parts are correctly oriented before tightening screws. Do not force components.
Operating Instructions
Converting Between Modes
- Armchair Mode: Ensure the footrest is fully retracted and the backrest is in an upright position.
- Chaise Lounge Mode: Pull the side handle located on the armrest to extend the footrest. Adjust the backrest to a reclined position (e.g., 140°).
- Sleeper Bed Mode: Fully extend the footrest by pulling the side handle. Recline the backrest to the flat (180°) position.
Image: A user demonstrating how to extend the footrest by pulling the integrated strap.
Adjusting the Backrest
The backrest offers three adjustable angles for various activities:
- 100°: Ideal for reading or upright seating.
- 140°: Suitable for lounging or watching TV.
- 180°: Flat position for sleeping.
Image: Illustration of the three backrest angles: 100° for reading, 140° for watching TV, and 180° for sleeping.
Using USB Charging Ports
Two built-in USB ports are located on the armrest for convenient device charging. Simply connect your device's charging cable to the port.
- Compatibility: The USB ports are generally compatible with most devices. Note: Not compatible with iPhone 15 and above.
- Safety: Ensure no liquids are near the ports during use.
Image: A close-up view of the built-in USB charging port on the armrest, with a smartphone connected for charging.
Utilizing Cup Holders and Storage Pockets
The chair features dual cup holders and built-in side storage pockets for convenience.
- Cup Holders: Use for beverages. Ensure cups fit securely to prevent spills.
- Storage Pockets: Ideal for storing remotes, magazines, or small electronic devices.
Image: A composite image highlighting the dual USB charging ports, double cup holders, and practical side storage pockets.
Maintenance
Cleaning Instructions
- Fabric Upholstery: Wipe clean with a dry cloth. Avoid using water or harsh chemicals, as these may damage the linen fabric.
- Spills: Blot spills immediately with a clean, dry cloth. Do not rub.
- General Care: Regularly vacuum the chair to remove dust and debris.
Structural Care
- Periodically check all bolts and screws to ensure they are tight. Retighten if necessary.
- Avoid placing excessive weight on the armrests or edges of the chair.
Troubleshooting
This section addresses common issues you might encounter with your FLEXISPOT XCT2 Sleeper Chair Bed.
Assembly Issues
- Difficulty with Screw Alignment: Ensure all parts are correctly oriented as per the assembly manual. Do not force screws. If a screw does not fit, double-check the corresponding part and hole.
- Missing Components: If any parts are missing, contact customer support immediately.
Functionality Issues
- Footrest Not Extending/Retracting Smoothly: Check for any obstructions under or around the footrest mechanism. Ensure the side handle is fully engaged when pulling.
- USB Ports Not Charging: Verify that the chair is properly connected to a power source (if applicable, though the product description implies direct USB power). Test with a different device and cable. Ensure no liquids have entered the ports.
- Backrest Not Adjusting: Ensure no weight is applied to the backrest while attempting to adjust. Check for any obstructions in the reclining mechanism.
Specifications
Detailed technical specifications for the FLEXISPOT XCT2 Sleeper Chair Bed.
| Feature | Detail |
|---|---|
| Brand | FLEXISPOT |
| Model | XCT2 |
| Product Dimensions (Chair) | 18.9"D x 34.26"W x 33.08"H |
| Item Weight | 78.3 Pounds |
| Type | Sleeper Chair Bed |
| Color | Black |
| Upholstery Fabric Type | Linen |
| Frame Material Type | Metal |
| Seat Fill Material | High Density Foam |
| Seating Capacity | 1 Person |
| Reclining Position Count | 3 (100°, 140°, 180°) |
| Special Features | Folding, USB Ports, Cup Holders, Side Pockets |
| Assembly Required | Yes (Installation Required) |
| Includes All Assembly Tools | Yes |
Image: Detailed product dimensions for both the chair and extended bed configurations.
Warranty Information
The FLEXISPOT XCT2 Sleeper Chair Bed comes with a Limited Warranty.
For specific details regarding warranty coverage, duration, and claims process, please refer to the warranty card included with your product or visit the official FLEXISPOT website. Keep your proof of purchase for warranty validation.
Customer Support
If you have any questions, require assistance with assembly, or need to report an issue, please contact FLEXISPOT customer support.
Contact Methods
- Email: contact@flexispot.com
- Phone: +1 (855) 585-5618
Image: FLEXISPOT official contact details for customer support.
Contacting Seller via Amazon
If you purchased your product through Amazon, you can also contact the seller directly:
- Log in to your Amazon Account.
- Go to 'Your Orders'.
- Find the relevant Order ID for your purchase.
- Click 'Contact Seller'.
Image: Step-by-step guide on how to contact the seller through your Amazon account.