Jocoevol 8-Drawer Dresser User Manual

Introduction

Thank you for choosing the Jocoevol 8-Drawer Dresser. This manual provides detailed instructions for assembly, operation, and maintenance to ensure safe and proper use of your new furniture. Please read all instructions carefully before beginning assembly and keep this manual for future reference.

Important Safety Information

• Always assemble the dresser on a soft, clean surface to prevent scratches.
• Ensure all parts are present and undamaged before assembly.
• Do not overtighten screws, as this may damage the material.
• For your safety, it is highly recommended to install the included anti-tip kit to secure the dresser to a wall. This prevents accidental tipping, especially in households with children.
• Do not allow children to climb on or play with the dresser.
• Distribute weight evenly in drawers to maintain stability.

Parts List

Before assembly, verify that all components and hardware are included. Refer to the diagram below for visual identification of parts.

Figure 1: Exploded view of all dresser components and hardware. This image displays all individual wooden panels, drawer slides, and various screws, dowels, and cam locks required for assembly, each labeled with a number or letter for easy identification.

Hardware (Example, refer to actual manual for full list):

• A: Cam Bolts (x66+1)
• B: Cam Locks (x38+1)
• C: Wooden Dowels (x52+1)
• D: Long Screws (x8)
• E: Short Screws (x96+2)
• F: Drawer Box Screws (x32)
• G: Drawer Front Screws (x16)
• I: Drawer Handles (x8)
• P: Anti-tip Brackets (x2)
• DL: Drawer Left Slides (x8)
• DR: Drawer Right Slides (x8)
• CL: Cabinet Left Slides (x8)
• CR: Cabinet Right Slides (x8)

Wooden Components (Example, refer to actual manual for full list):

• 1: Top Panel
• 2, 3: Side Panels
• 4, 5, 6, 7: Horizontal Supports
• 8: Back Panel
• 9, 11: Bottom Panels
• 12, 13: Base Supports
• 14: Back Panels for Drawers (x4)
• 16: Drawer Fronts (x8)
• 17, 18: Drawer Side Panels (x8 each)
• 19: Drawer Back Panels (x8)
• 20: Drawer Bottom Panels (x8)

Assembly Instructions

Follow these steps carefully for proper assembly. It is recommended to have two people for assembly.

Video Installation Guide:

Step 1: Prepare the Base Panels

1. Attach the Cabinet Left Slides (CL) and Cabinet Right Slides (CR) to the bottom panels (9 and 11) using Short Screws (E). Ensure the slides are oriented correctly.
2. Insert Cam Bolts (A) into the designated holes on the bottom panels (9 and 11).

Figure 2: Installation of drawer slides and cam bolts on the base panels. This image highlights the smooth-glide drawer mechanism and the sturdy construction.

Step 2: Assemble the Main Frame

1. Connect the base supports (12 and 13) to the bottom panel (11) using Cam Locks (B) and the pre-installed Cam Bolts.
2. Attach the side panels (2 and 3) to the assembled base using Cam Locks (B).
3. Insert Wooden Dowels (C) into the appropriate holes on the side panels and horizontal supports (4, 5, 6, 7).
4. Secure the horizontal supports (4, 5, 6, 7) between the side panels using Cam Locks (B) and Cam Bolts (A).


Figure 3: The main frame of the dresser assembled, showcasing the internal structure and the robust design.

Step 3: Attach the Top Panel and Back Panels

1. Place the top panel (1) onto the assembled frame, aligning the Cam Bolts with the Cam Locks. Secure tightly.
2. Slide the back panels (14) into the grooves on the rear of the dresser frame.
3. Secure the main back panel (8) to the frame using Long Screws (D).


Figure 4: The dresser with its top panel and back panels in place, showing the complete structural integrity.

Step 4: Assemble the Drawers (Repeat 8 times)

1. Attach the Drawer Left Slides (DL) and Drawer Right Slides (DR) to the drawer side panels (17 and 18) using Short Screws (E).
2. Connect the drawer side panels (17, 18), drawer back panel (19), and drawer front panel (16) using Drawer Box Screws (F).
3. Slide the drawer bottom panel (20) into the designated grooves.
4. Attach the drawer handle (I) to the drawer front (16) using Drawer Front Screws (G).

Figure 5: An assembled drawer, illustrating its deep capacity and smooth-gliding mechanism. This image also shows the approximate number of clothing items that can be stored.

Step 5: Insert Drawers and Install Anti-Tip Kit

1. Carefully insert each assembled drawer into its corresponding slot in the dresser frame, ensuring the drawer slides engage properly.
2. Position the dresser in its desired location.
3. Attach the Anti-tip Brackets (P) to the top rear edge of the dresser and to the wall using appropriate wall anchors and screws (not always included, check local hardware store for suitable anchors for your wall type). This step is crucial for safety.


Figure 6: The fully assembled dresser with all drawers in place. A close-up detail shows the L-shaped screw mechanism for securing the dresser to the wall, emphasizing stability and safety.

Setup and Placement

The Jocoevol 8-Drawer Dresser is designed for versatile use in various rooms. Consider the following for optimal placement:

• Bedroom: Ideal for storing clothing, linens, and personal items.
• Living Room: Can serve as a stylish TV stand or a storage unit for media and accessories.
• Hallway/Entryway: Perfect for organizing daily essentials like keys, mail, and small bags.

Ensure the dresser is placed on a flat, stable surface. Always use the anti-tip kit provided to secure the dresser to the wall, especially if children are present in the home.

Figure 7: The Jocoevol 8-Drawer Dresser integrated into a bedroom environment, demonstrating its aesthetic appeal and functional use.

Operating Instructions

The dresser features eight deep, smooth-gliding drawers designed for easy access and ample storage.

• Opening/Closing Drawers: Gently pull or push the metal handles to open and close the drawers. The metal slides ensure smooth and silent operation.
• Weight Capacity: Distribute items evenly within the drawers. Avoid overloading individual drawers to prevent damage to the slides and maintain the dresser's stability. The spacious top surface is suitable for decor, lamps, or small electronics.

Figure 8: The dresser with key dimensions highlighted, and a drawer partially open to show its depth and the smooth-glide mechanism.

Maintenance and Care

To ensure the longevity and appearance of your Jocoevol dresser, follow these care guidelines:

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, as they may damage the finish. The thickened top is designed to resist scratches and repel water, making cleaning easy.
• Spills: Promptly wipe up any spills to prevent staining or damage to the wood.
• Sunlight Exposure: Avoid prolonged direct sunlight exposure to prevent fading or discoloration of the finish.
• Hardware: Periodically check all screws and fasteners to ensure they are tight. Retighten if necessary to maintain stability.

Troubleshooting

If you encounter any issues with your dresser, refer to the common problems and solutions below:

Specifications

Warranty and Support

Jocoevol is committed to providing high-quality products. For any inquiries or assistance, please refer to the following:

• Returns: This product is eligible for 30-day easy returns. Please refer to the retailer's return policy for detailed information.
• Customer Support: For technical assistance, missing parts, or any other concerns, please contact Jocoevol customer support. Contact information can typically be found on the product packaging or the retailer's website.
• Protection Plans: Additional protection plans may be available for purchase through the retailer.

Note: Specific warranty terms and contact details may vary. Always refer to the latest information provided by Jocoevol or your point of purchase.