1. Introduction
Thank you for choosing the Tefcold FS1205S Professional Beverage Cabinet. This appliance is designed for efficient and reliable storage of beverages, dairy products, and sandwiches in commercial environments such as supermarkets, grocery stores, shops, and cafes. The FS series is characterized by its streamlined design, offering increased internal height due to the absence of a light box. This manual provides essential information for the safe and effective use of your new appliance.
2. Important Safety Information
Please read all safety instructions carefully before operating the appliance to prevent injury or damage. Keep this manual for future reference.
- Ensure the appliance is placed on a stable, level surface.
- Do not block ventilation openings in the appliance enclosure or in the built-in structure.
- Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
- Do not damage the refrigerant circuit.
- Only qualified personnel should perform repairs or maintenance.
- Disconnect the appliance from the power supply before cleaning or maintenance.
3. Setup and Installation
3.1 Unpacking
Carefully remove the appliance from its packaging. Inspect for any shipping damage. Report any damage to your supplier immediately.
3.2 Placement
Position the cabinet in a well-ventilated area, away from direct sunlight or heat sources. Ensure adequate space around the unit for air circulation.
3.3 Leveling
The appliance is equipped with adjustable feet. Use a spirit level to ensure the cabinet is perfectly level. This is crucial for proper door operation and drainage.
Figure 1: Tefcold FS1205S Professional Beverage Cabinet. This image displays the Tefcold FS1205S Professional Beverage Cabinet. It features a white exterior, two transparent glass sliding doors, and multiple adjustable white wire shelves inside. The top section includes internal fans for ventilation, and a digital temperature display is visible on the lower front panel.
3.4 Initial Cleaning
Before first use, clean the interior and exterior of the cabinet with a mild detergent and warm water. Rinse thoroughly and dry completely.
4. Operating Your Beverage Cabinet
4.1 Power Connection
Plug the appliance into a grounded electrical outlet. Allow the cabinet to run empty for a few hours to reach the desired temperature before loading products.
4.2 Temperature Control
The FS1205S features a digital temperature display and control panel located at the bottom front of the unit. Refer to the specific controller manual (if provided separately) for detailed instructions on setting and adjusting the temperature. The cabinet utilizes ventilated cooling for consistent temperature distribution.
4.3 Loading the Cabinet
The cabinet is supplied with 10 adjustable white wire shelves. Arrange the shelves to accommodate your products efficiently. Avoid overloading the shelves or blocking the internal air circulation. The self-closing glass sliding doors ensure minimal temperature loss during access.
Capacity Examples:
- 330 ml Cans: 1152
- 500 ml Cans: 816
- 330 ml Bottles: 560
- 500 ml Bottles: 560
4.4 Internal Lighting
The cabinet is equipped with vertical internal lighting to enhance product visibility. This lighting typically operates automatically or can be controlled via a switch on the control panel.
5. Maintenance and Cleaning
Regular maintenance ensures optimal performance and longevity of your appliance.
5.1 Daily Cleaning
- Wipe down the interior and exterior surfaces with a damp cloth and mild, non-abrasive cleaner.
- Clean the glass doors to maintain visibility.
- Ensure the self-closing mechanism of the sliding doors operates smoothly.
5.2 Monthly Cleaning
- Disconnect the power supply.
- Clean the condenser coils (located at the bottom of the unit) using a brush or vacuum cleaner to remove dust and debris. This improves cooling efficiency.
- Clean the adjustable shelves thoroughly.
5.3 Defrosting
The unit features automatic defrosting. If excessive ice buildup occurs, manually defrost the unit by unplugging it and leaving the doors open until all ice has melted. Clean and dry the interior before restarting.
6. Troubleshooting
Before contacting service, please check the following common issues:
| Problem | Possible Cause | Solution |
|---|---|---|
| Appliance not cooling | No power; thermostat set too high; condenser dirty; door not closing properly. | Check power supply; adjust thermostat; clean condenser; ensure doors are sealed. |
| Excessive noise | Appliance not level; fan obstruction; loose components. | Level the unit; check for obstructions around fans; contact service if persistent. |
| Water on floor | Drainage tube blocked or disconnected. | Clear drainage tube; ensure proper connection. |
7. Technical Specifications
Key specifications for the Tefcold FS1205S Professional Beverage Cabinet:
- Brand: Tefcold
- Model: FS1205S
- Color: White
- Item Weight: 174 Kilograms
- ASIN: B0FJK1KXW1
- First Available on Amazon.fr: July 22, 2025
- Spare Parts Availability: Information unavailable
- Features: Ventilated cooling, 10 adjustable white wire shelves, 2 self-closing glass sliding doors, vertical internal lighting, adjustable feet.
8. Warranty and Support
For warranty information, technical support, or spare parts inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt and model number (FS1205S) handy when contacting support.
