Fanttik D2 PRO Laser Level & K2 Ultra 7.4V Power Drill

Introduction

This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your Fanttik D2 PRO Laser Level and Fanttik K2 Ultra 7.4V Power Drill. Please read this manual thoroughly before using the products to ensure optimal performance and safety.

Image: The Fanttik D2 PRO Laser Level (left) and the Fanttik K2 Ultra 7.4V Power Drill (right) with its charging base.

Product Components

Familiarize yourself with the main components of both devices:

Fanttik D2 PRO Laser Level

• Laser Emitters: Project green laser lines.
• LED Smart Display: Shows real-time power consumption and status.
• Control Buttons: For mode selection and power.
• USB-C Charging Port: For recharging the internal battery.

Image: Close-up of the Fanttik D2 PRO Laser Level's LED Smart Display, showing indicators for low power, normal power, and charging status.

Image: The Fanttik D2 PRO Laser Level with a USB-C cable plugged into its charging port, highlighting the 2600 mAh rechargeable battery.

Fanttik K2 Ultra 7.4V Power Drill

• Drill Chuck: Holds various drill bits and screwdriver bits.
• Dual-Screen Display: Provides real-time information including rotation direction and lock status.
• TapSwitch™ Button: For gear shifting.
• Electric Direction Switch: Controls drill direction (in/out) and lock function.
• USB Type-C Port: For charging the internal battery.

Image: Close-up of the Fanttik K2 Ultra Power Drill's display, showing the TapSwitch™ button for gear changes and RPM readings.

Image: Illustrations demonstrating the Electric Direction Switch on the Fanttik K2 Ultra Power Drill for 'Drill In', 'Locked' (long press), and 'Drill Out' modes.

Image: An X-ray view of the Fanttik K2 Ultra Power Drill highlighting its internal long-lasting battery and Type-C 5V 2A charging capability.

Setup

Fanttik D2 PRO Laser Level

1. Charging: Before first use, fully charge the D2 PRO using the provided USB-C cable. The LED Smart Display will indicate charging status. A full charge provides up to 7 hours of continuous use.
2. Placement: Place the laser level on a stable, flat surface or mount it on a compatible tripod.

Fanttik K2 Ultra 7.4V Power Drill

1. Charging: Connect the K2 Ultra to a 5V 2A Type-C power source to charge its internal battery.
2. Bit Installation: Twist the chuck counter-clockwise to open, insert the desired drill or screwdriver bit, then twist clockwise to secure it firmly.

Operating Instructions

Fanttik D2 PRO Laser Level

1. Power On: Press the power button to turn on the device.
2. Mode Selection:
   • Self-Leveling Mode: When powered on, the device defaults to self-leveling mode. If the device is within its self-leveling range, the laser lines will automatically level. If outside the range, the laser will blink to indicate it cannot self-level. This mode is ideal for accurate horizontal and vertical alignment, with an accuracy of 3/32 in at 30 ft and a projection range of up to 100 ft.
   • Manual Mode: Press the mode button to switch to manual mode. In this mode, the laser lines can be projected at any angle, useful for tasks like stair railing installation. The laser will not self-level in this mode.
3. Line Modes: The D2 PRO supports three line modes:
   • Vertical Line (130° expansion)
   • Horizontal Line (120° expansion)
   • Both Vertical and Horizontal Lines
   Cycle through these options using the appropriate button.
4. Monitoring Power: The advanced LED Smart Display allows real-time monitoring of power consumption.

Image: Visual representation of the three line modes available on the Fanttik D2 PRO Laser Level: Vertical Line (130°), Horizontal Line (120°), and Both 2 Laser Lines.

Image: Examples of the Fanttik D2 PRO Laser Level in use, demonstrating the Manual Mode for angled projection and Self-Leveling Mode for precise horizontal and vertical alignment.

Fanttik K2 Ultra 7.4V Power Drill

1. Power On/Off: The drill is activated by pressing the trigger.
2. Electric Direction Switch: Use the switch to select drilling direction (Drill In, Drill Out). A long press on this switch activates the lock function, preventing accidental operation.
3. TapSwitch™ Gear Change System: Press the TapSwitch™ button to cycle through different gear settings, adjusting the RPM for various tasks. The VoltiPulse brushless motor provides impressive torque up to 30 N.m and a speed of 1250 RPM.
4. Smart Interaction Dual-Screen: Monitor the rotation direction and other real-time information on the dual-screen display for greater efficiency.

Image: A user operating the Fanttik K2 Ultra Power Drill as an electric screwdriver, with an inset showing the display indicating torque settings (1-20 / 30 N·m).

Maintenance

• Cleaning: Regularly wipe down both devices with a dry, soft cloth to remove dust and debris. Do not use harsh chemicals or abrasive cleaners.
• Battery Care: To prolong battery life, avoid fully discharging the batteries frequently. Store the devices with a partial charge if not used for extended periods. Recharge fully before long-term storage.
• Storage: Store the laser level and power drill in a cool, dry place, away from direct sunlight and extreme temperatures. Keep them in their original packaging or a protective case when not in use.

Troubleshooting

• Laser Level Not Self-Leveling: Ensure the device is placed on a relatively level surface. If the laser blinks rapidly, it is outside its self-leveling range. Adjust its position.
• Laser Lines Are Dim: Check the battery level on the LED Smart Display. Recharge if necessary. Ensure the working environment is not excessively bright.
• Power Drill Not Operating: Check the battery charge. Ensure the Electric Direction Switch is not in the 'Locked' position (indicated by a long press).
• Drill Bit Slipping: Ensure the drill bit is properly inserted and securely tightened in the chuck.

Specifications

Warranty and Support

For detailed warranty information, please refer to the official documentation provided with your product or visit the Fanttik official website. Warranty terms may vary by region and product.

For technical support, service, or to purchase accessories, please visit the official Fanttik Store at Fanttik Store on Amazon.