Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your CORSAIR AIR 5400 LX-R RGB iCUE Link PC Case. Designed with an innovative triple-chamber layout, panoramic tempered glass, and advanced cooling features, this mid-tower case offers exceptional performance and aesthetics for your high-performance PC build. Please read this manual thoroughly before beginning assembly to ensure proper setup and safe operation.
Safety Information
Always observe the following safety precautions during installation and operation:
- Disconnect the power supply from the wall outlet before installing or servicing any components.
- Avoid exposing the case to moisture or extreme temperatures.
- Handle tempered glass panels with care to prevent breakage.
- Ensure all cables are routed properly and do not obstruct fans or moving parts.
- Do not attempt to modify the case or its components, as this may void your warranty and pose a safety risk.
Package Contents
Verify that all components are present in your package:
- CORSAIR AIR 5400 PC Case
- 3x LX120-R RGB Fans (pre-installed)
- iCUE LINK System Hub (pre-installed)
- Accessory Box (screws, ties, mounting hardware)
- Magnetic Mylar Cover
Features Overview
Triple Chamber Design
The CORSAIR AIR 5400 LX-R features an innovative triple-chamber design that isolates heat-generating components. This separation ensures optimal cooling for the CPU, GPU, and PSU, preventing thermal interference and simplifying cable management.
Image: Triple Chamber Design. This diagram visually represents the distinct compartments for the GPU, PSU, and CPU within the chassis, highlighting the thermal separation.
Optimized Airflow
Specialized dual airflow conduits in the main chamber draw cool air from outside the chassis and direct it efficiently towards the graphics card. This vertical airflow design ensures thorough cooling of all components and effective exhaust of hot air.
Image: Dual Airflow Conduits. This image demonstrates the internal airflow paths, showing how cool air is drawn in and directed to critical components, then exhausted.
Dedicated AIO Radiator Chamber
The front of the chassis features a dedicated chamber for a 360mm All-In-One (AIO) liquid cooler. This design ensures that heat generated by CPU cooling is kept separate from other components, enhancing overall thermal performance.
Image: Processor AIO Radiator Chamber. An exploded view highlights the separate compartment designed for AIO liquid coolers, emphasizing ease of installation and thermal isolation.
Included LX120-R RGB Fans
The case comes pre-installed with three iCUE LINK LX120-R RGB reverse-rotor fans. These fans provide powerful yet quiet intake airflow with vibrant RGB lighting, contributing to both efficient cooling and stunning visual effects.
Image: Included LX120-R RGB Fans. This close-up shows the three pre-installed RGB fans, highlighting their illumination and placement within the case.
Curved Glass Panels
Two curved tempered glass panels meet at the corner of the chassis and open outwards on integrated hinges. This design provides an unobstructed panoramic view of your components and offers easy access for upgrades or maintenance.
Image: Curved Double-Hinged Glass Panels. The image displays the case with its glass panels swung open, emphasizing the wide viewing angle and accessibility.
RapidRoute 2.0 Cable Management
The RapidRoute 2.0 system simplifies cable management with a pegboard-style motherboard tray and adjustable clip-on cable ties. These features allow for customizable cable routing, ensuring a clean and organized build, especially in the third chamber.
Image: RapidRoute 2.0. This view shows the back of the motherboard tray with cables organized using the RapidRoute 2.0 system, demonstrating its effectiveness.
Front I/O Panel
The easily accessible front I/O panel, located on the top of the case, includes one USB 3.2 Gen 2 Type-C port, two USB 3.2 Gen 1 Type-C ports for ultra-fast data transfers, and a 3.5mm combo audio jack.
Image: All Front USB Type-C I/O. A detailed view of the top-mounted front I/O panel, labeling each port for easy identification.
Cooling Options and Radiator Support
The case supports up to 10x 120mm fans and offers extensive radiator compatibility, including a 360mm radiator in the front chamber, and up to 360mm radiators on the top and bottom, ensuring comprehensive cooling for any high-end system.
Image: Master Your Temperatures. This diagram illustrates the various fan and radiator mounting points, indicating supported sizes for optimal thermal management.
Upgrade Readiness
Generous interior space accommodates large graphics cards (up to 360mm in length) and supports inverted connection motherboards (ASUS BTF, MSI Project Zero, GIGABYTE Project Stealth), facilitating clean and powerful builds.
Image: Ready for Upgrades. This image provides key dimensions and indicates the maximum GPU length supported, demonstrating the case's expandability.
Additional Functionalities
- Easy Cable Management: Nylon brushes between chambers allow for easy cable pass-through without compromising aesthetics.
- Hidden Cables: Compatibility with inverted connector motherboards (ASUS, MSI, GIGABYTE) enables ultra-clean builds with no visible cables.
- Anti-Sag GPU Support: An integrated, adjustable anti-sag bracket keeps your graphics card stable, preventing damage to the PCIe slot.
Image: Rich in Functionalities. This composite image illustrates the cable routing brushes, the clean look with an inverted motherboard, and the GPU anti-sag support.
Setup
1. Pre-Installation Checks
Before starting assembly, ensure you have all necessary components and tools. Unpack the case carefully and remove any protective films or packaging materials.
2. Motherboard Installation
- Open the side panels by gently pulling them outwards from the integrated hinges.
- Install the necessary motherboard standoffs for your motherboard form factor (Mini-ITX, Micro-ATX, ATX, E-ATX).
- Carefully place your motherboard into the chassis, aligning it with the standoffs and I/O shield opening.
- Secure the motherboard with the provided screws. If using an inverted connection motherboard, ensure proper alignment with the rear cable cutouts.
3. Power Supply Unit (PSU) Installation
- Locate the dedicated PSU chamber at the rear of the case.
- Slide your ATX power supply into its designated slot.
- Secure the PSU with screws from the rear of the chassis.
4. Storage Device Installation
The case supports various storage configurations. Install your SSDs and HDDs into the designated drive bays in the third chamber, securing them with the provided hardware.
5. Graphics Card (GPU) Installation
- Remove the necessary PCIe slot covers.
- Insert your graphics card into the primary PCIe slot on the motherboard.
- Secure the GPU with the retention mechanism or screws.
- Adjust the integrated anti-sag GPU support bracket to provide stability for your graphics card.
6. Cooling System Installation (AIO/Additional Fans)
If installing an AIO liquid cooler, mount the radiator and fans in the dedicated front chamber. For additional fans, utilize the top, bottom, or rear mounting points as desired. Ensure fans are oriented for optimal airflow (intake or exhaust).
7. Cable Management
Utilize the RapidRoute 2.0 system with its pegboard tray and adjustable cable ties to route all power and data cables neatly behind the motherboard tray. This ensures unobstructed airflow and a clean interior aesthetic.
8. Connecting Front I/O
Connect the front panel cables (USB, audio, power button) to their respective headers on your motherboard. Refer to your motherboard manual for specific header locations.
Operating
Powering On
Once all components are installed and cables are connected, close the side panels. Connect your PC to a power outlet and press the power button on the front I/O panel to start your system.
iCUE Software Control
For full control over the LX120-R RGB fans and other CORSAIR iCUE Link compatible devices, download and install the CORSAIR iCUE software from the official CORSAIR website. iCUE allows you to customize RGB lighting effects, monitor fan speeds, and adjust performance settings.
Maintenance
Cleaning Dust Filters
The CORSAIR AIR 5400 LX-R includes removable dust filters to protect your components. Regularly clean these filters by gently removing them and washing them with water or wiping them with a soft cloth. Ensure they are completely dry before re-installing.
General Care
Wipe the exterior of the case, including the glass panels, with a soft, lint-free cloth. Avoid abrasive cleaners or solvents that could damage the finish or glass.
Troubleshooting
No Power
- Check if the power supply is properly connected to the wall outlet and the motherboard.
- Ensure the power switch on the PSU is in the 'ON' position.
- Verify that the front panel power button cable is correctly connected to the motherboard header.
Fans Not Spinning / RGB Not Working
- Confirm that the iCUE LINK System Hub is powered and connected to the motherboard.
- Ensure all fans are properly connected to the iCUE LINK System Hub.
- Check iCUE software settings for fan profiles and RGB lighting configurations.
Overheating Issues
- Verify that all fans are spinning and oriented correctly for optimal airflow.
- Clean any dust filters to ensure unrestricted air intake.
- Ensure proper thermal paste application on the CPU cooler.
Specifications
| Feature | Specification |
|---|---|
| Model Name | AIR 5400 LX-R RGB iCUE LINK |
| Case Type | Mid-Tower |
| Dimensions (L x W x H) | 47 cm x 34 cm x 46.7 cm |
| Weight | 13.92 Kilograms |
| Motherboard Compatibility | Mini-ITX, Micro-ATX, ATX, E-ATX (305mm x 277mm), ASUS BTF, MSI Project Zero, GIGABYTE Project Stealth |
| Material | Steel, Tempered Glass, Plastic, Acrylic |
| Cooling Method | Air |
| Included Fans | 3x LX120-R RGB (pre-installed) |
| Front I/O Ports | 1x USB 3.2 Gen 2 Type-C, 2x USB 3.2 Gen 1 Type-C, 1x 3.5mm Combo Audio |
| Internal Drive Bays | 5 |
| Expansion Slots | 7 Horizontal |
| Power Supply Type | ATX (Bottom Mount) |
| Features | Dust Filter, Integrated Fan, RGB Lighting, Triple Chamber Design, Panoramic Glass, RapidRoute 2.0 Cable Management, Anti-Sag GPU Support |
Warranty
The CORSAIR AIR 5400 LX-R RGB iCUE Link PC Case comes with a 2-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For detailed warranty terms and conditions, please refer to the official CORSAIR website or contact customer support.
Support
For technical assistance, troubleshooting guides, or to register your product, please visit the official CORSAIR support website. You can also find FAQs and community forums for additional help.
Official CORSAIR Website: www.corsair.com
Product Video Overview
Watch this video for a visual overview of the CORSAIR AIR 5400 LX-R RGB iCUE Link PC Case features and design.
Video: CORSAIR AIR 5400 LX-R RGB iCUE Link PC Case Overview. This video demonstrates the case's triple chamber design, airflow, and aesthetic features.
