BETUMODA Level 1 & 2 EV Charger Instruction Manual

1. Introduction

This manual provides essential information for the safe and efficient operation of your BETUMODA Level 1 & 2 Portable EV Charger. Please read this manual thoroughly before using the product and retain it for future reference.

The BETUMODA 32A Portable EV Charger is designed to provide flexible and efficient charging for your electric vehicle or plug-in hybrid. It supports both Level 1 (110V) and Level 2 (240V) charging, offering adjustable current settings and a delay timer function.

Image: The BETUMODA 32A Level 1 & 2 Portable EV Charger connected to an electric vehicle outside a residence.

2. Safety Information

Your safety is paramount. This charger is equipped with multiple safety features. Adhere to the following guidelines to ensure safe operation:

• Ensure the charging cable is free from damage before each use. Do not use if damaged.
• Always connect the charger to a properly grounded outlet.
• When using the NEMA 5-15 plug (Level 1 charging), set the current to 16A or lower to prevent circuit overload.
• Do not immerse the control box or charging connector in water. The unit is IP65 rated for water and dust resistance, but not for submersion.
• Avoid using extension cords or adapters not supplied with the charger, as this may lead to overheating or damage.
• Keep children and pets away from the charging area during operation.
• Do not attempt to open or repair the charger. Contact customer support for assistance.

Integrated Protection Features:

The BETUMODA EV Charger is engineered with 10 levels of intelligent protection, certified to CE and FCC standards, including:

• IP65 Waterproof & Dustproof: Protection against water jets and dust ingress.
• Grounding Protection: Ensures proper electrical grounding.
• Lightning Protection: Safeguards against electrical surges from lightning.
• Overcharge Protection: Prevents battery overcharging.
• Undervoltage Protection: Protects against low voltage conditions.
• Overheat Protection: Monitors and prevents excessive temperature.
• Leakage Protection: Detects and prevents electrical leakage.
• Overcurrent Protection: Guards against excessive current flow.
• Overvoltage Protection: Protects against high voltage conditions.
• Short-Circuit Protection: Prevents damage from short circuits.

Image: Visual representation of the 10 intelligent protection features, including IP65, grounding, lightning, overcharge, undervoltage, overheat, leakage, overcurrent, overvoltage, and short-circuit protection.

Image: Illustrations of the charger's all-weather protection, showing its resilience in rain (IP65 waterproof), snow (-22°F), extreme heat (+113°F), and dusty environments (IP65 dustproof).

3. Package Contents

Please verify that all items are present in your package:

• BETUMODA 32Amp EV Charger (with NEMA 14-50 plug attached)
• User Manual
• NEMA 5-15 Plug (adapter)
• Fixed Nails (screws and wall anchors for mounting)
• Control Box Holder
• Portable Carry Bag

Image: A visual breakdown of the package contents, including the main charger unit, user manual, NEMA 5-15 adapter, mounting hardware, control box holder, and a portable carry bag.

4. Setup

The BETUMODA EV Charger is designed for easy installation without professional wiring. It can be used as a portable charger or mounted for convenience.

Mounting the Control Box (Optional):

1. Choose a suitable location near your charging outlet, ensuring it is protected from direct heavy rain and accessible.
2. Use the provided fixed nails (screws and wall anchors) to securely attach the Control Box Holder to the wall.
3. Slide the charger's control box into the holder.

Connecting to Power:

The charger supports both NEMA 14-50 (240V) and NEMA 5-15 (110V) outlets.

• For Level 2 Charging (240V): Plug the NEMA 14-50 connector directly into a compatible 240V NEMA 14-50 outlet.
• For Level 1 Charging (110V): Attach the NEMA 5-15 adapter plug to the charger's NEMA 14-50 plug, then insert the NEMA 5-15 plug into a standard 110V household outlet. Important: When using the NEMA 5-15 plug, ensure the current setting on the charger is 16A or lower.

Image: Visual guide for connecting the charger for Level 2 (NEMA 14-50, 240V 32A) and Level 1 (NEMA 5-15, 120V 16A) charging, highlighting the current limit for Level 1.

5. Operating Instructions

The BETUMODA EV Charger features an intuitive touch LED display for adjusting settings.

Connecting to Your Vehicle:

1. Ensure the charger is securely plugged into the power outlet.
2. Open your vehicle's charging port.
3. Insert the J1772 charging connector firmly into your vehicle's charging port until it clicks into place.
4. The charger will automatically detect the connection and display charging status.

Adjusting Current Settings:

The charger allows you to select from 5 current levels: 8A, 13A, 16A, 24A, and 32A.

1. Enter Selection Mode: Long press either button on the control box. The current value on the LED display will turn red, indicating it's ready for adjustment.
2. Adjust Current: Short press either button to cycle through the available current options (8A/13A/16A/24A/32A).
3. Confirm Selection: The charger will automatically confirm the selected current after a few seconds of inactivity, or you can long press a button again to exit selection mode.

Using the Delay Timer:

The delay timer allows you to schedule charging to begin after a set number of hours (1-12 hours), ideal for off-peak charging.

1. Enter Selection Mode: Long press either button on the control box.
2. Select Delay Time: Short press either button until the delay time (e.g., "1H", "2H") is displayed and turns red.
3. Adjust Delay: Short press either button to cycle through delay options (1-12 hours).
4. Confirm Selection: The charger will automatically confirm the selected delay after a few seconds of inactivity. Charging will begin after the set delay period.

Image: The charger's control panel displaying current settings and delay timer options, with instructions on how to long press or short press buttons to adjust settings.

Charging Performance Examples:

Estimated full charging times for a Chevrolet Equinox EV (65kWh battery) at 240V:

• 8A: Approximately 33.8 hours
• 13A: Approximately 21 hours
• 16A: Approximately 17 hours
• 24A: Approximately 11 hours
• 32A: Approximately 8.4 hours

Note: Actual charging time may vary due to battery condition, ambient temperature, and vehicle charging efficiency.

Image: A bar chart illustrating the estimated charging duration for a Chevrolet Equinox EV (65 kWh) at various amperage settings (8A to 32A) when operating at 240V.

Image: An infographic detailing the estimated miles of driving range added per hour (MPH) at different amperage settings for both 110V and 240V charging.

6. Maintenance

Proper maintenance ensures the longevity and safe operation of your EV charger.

• Cleaning: Wipe the control box and cable with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Storage: When not in use, store the charger in its portable carry bag in a dry, cool place, away from direct sunlight and extreme temperatures.
• Cable Inspection: Regularly inspect the charging cable and connectors for any signs of wear, cuts, or damage. If damage is found, discontinue use immediately and contact customer support.
• Connector Care: Keep the charging connector free from dirt, dust, and moisture. Use the protective cap when not connected to a vehicle.

7. Troubleshooting

If you encounter issues with your BETUMODA EV Charger, refer to the following common troubleshooting steps:

If these steps do not resolve the issue, please contact BETUMODA customer support for further assistance.

8. Specifications

9. Warranty and Support

BETUMODA is committed to providing high-quality products. For warranty information, technical support, or any questions regarding your EV charger, please refer to the contact information provided in your product packaging or visit the official BETUMODA website.

Please have your model number (32A EV CHARGER) and purchase date available when contacting support.