Focket Stainless Steel Adjustable Frame Display Stand User Manual

1. Introduction

Thank you for choosing the Focket Stainless Steel Adjustable Frame Display Stand. This versatile product is designed for displaying various items and features a specialized function for honey uncapping. Constructed from durable stainless steel, it offers stability and adjustability for diverse applications in commercial settings such as restaurants, bakeries, cafes, and for beekeeping enthusiasts.

This manual provides essential information for the safe and effective use of your display stand, including assembly, operation, maintenance, and troubleshooting.

2. Safety Instructions

• Read all instructions: Before assembly and use, carefully read and understand all instructions in this manual.
• Material handling: The stand is made of stainless steel. Handle with care to avoid sharp edges during assembly.
• Stable surface: Always place the assembled stand on a stable, level, and non-slip surface to prevent tipping.
• Weight capacity: Do not overload the stand. Ensure the weight of items placed on it does not exceed its structural capacity.
• Cleaning: Clean the stand regularly with appropriate cleaning agents for stainless steel. Avoid abrasive cleaners that may scratch the surface.
• Children and pets: Keep children and pets away from the stand during assembly and operation to prevent accidents.
• Intended use: Use the product only for its intended purpose as a display stand or honey uncapping tool.

3. Package Contents

Verify that all components are present and undamaged before proceeding with assembly. If any parts are missing or damaged, contact customer support.

• 1x Main Display Tray
• 2x Adjustable Support Legs
• 4x Wing Nuts (for securing legs)

Figure 3.1: Components of the Focket Frame Display Stand, including the main tray, two support legs, and four wing nuts for assembly.

4. Setup and Assembly

The Focket Frame Display Stand requires minimal assembly. Follow these steps to set up your stand:

1. Unpack Components: Carefully remove all parts from the packaging and place them on a clean, flat surface.
2. Attach Support Legs: Locate the two adjustable support legs and the main display tray. The tray has pre-drilled holes on its underside.
3. Insert Legs: Align the top ends of each support leg with the corresponding holes on the underside of the main display tray. The legs are designed to fit snugly.
4. Secure with Wing Nuts: From the underside of the tray, thread a wing nut onto each of the four leg posts that protrude through the holes. Tighten the wing nuts by hand until the legs are securely fastened to the tray. Do not overtighten.
5. Adjust Height: The legs can be adjusted to different angles to achieve the desired display height and tilt. Ensure both legs are adjusted symmetrically for stability.

Figure 4.1: Underside view of the assembled stand, illustrating how the support legs are secured with wing nuts.

5. Operating Instructions

5.1. General Display Use

The Focket Frame Display Stand can be used to showcase various items in a professional and appealing manner. Its adjustable design allows for flexible presentation.

• Placement: Position the stand on a stable, flat surface.
• Angle Adjustment: Adjust the angle of the support legs to achieve the desired tilt for optimal viewing of your displayed items.
• Item Placement: Carefully place items onto the main display tray. Ensure even weight distribution to maintain stability.

5.2. Honey Uncapping Function

This stand is specifically designed to facilitate the uncapping of honey frames, allowing for an interactive and hygienic process.

• Preparation: Ensure the stand is clean and placed on a surface that can collect honey drippings, such as a large tray or basin.
• Frame Placement: Carefully place a honey frame onto the display tray. The design of the tray is intended to hold the frame securely while allowing access for uncapping.
• Uncapping: Using an appropriate uncapping tool (not included), gently remove the wax cappings from the honey comb. The stand's angled design helps direct excess honey into a collection area below.
• Interactive Display: For commercial settings, this function allows customers to observe or even participate in the uncapping process, enhancing engagement and demonstrating product authenticity.

Figure 5.1: The Focket Frame Display Stand positioned at an angle, suitable for both general display and honey uncapping tasks.

6. Maintenance

Proper maintenance ensures the longevity and hygienic operation of your Focket Frame Display Stand.

• Regular Cleaning: After each use, especially when used for honey uncapping, clean the stand thoroughly.
• Cleaning Procedure: Wash with warm, soapy water. For stubborn residues, a mild, non-abrasive stainless steel cleaner can be used. Rinse thoroughly with clean water.
• Drying: Dry the stand immediately after washing with a soft cloth to prevent water spots and maintain its luster. Air drying may lead to water marks.
• Storage: Store the stand in a clean, dry place when not in use.
• Inspection: Periodically inspect the stand for any signs of wear, damage, or loose connections. Tighten wing nuts if necessary.

7. Troubleshooting

If you encounter any issues with your Focket Frame Display Stand, refer to the following common problems and solutions:

8. Specifications

• Product Dimensions: 10.63 x 10.63 x 1.97 inches (L x W x H)
• Item Weight: 3.31 pounds
• Material: Stainless Steel
• Model Number: Focketyh9iozc3ed
• Assembly Required: No (minimal assembly of legs)
• Batteries Required: No

9. Warranty and Support

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty details, please refer to the product packaging or contact your retailer.

For technical support, missing parts, or any inquiries regarding the Focket Stainless Steel Adjustable Frame Display Stand, please contact Focket customer service through your purchase platform or the official Focket website.