Godox V480 TTL Flash for Fuji Cameras

1. Introduction

This instruction manual provides detailed information on the setup, operation, and maintenance of your Godox V480 TTL Flash for Fuji Cameras. Please read this manual carefully before use to ensure proper function and to maximize the performance of your flash unit. Keep this manual for future reference.

2. Product Overview

Key Features

• 2-inch Color Touchscreen & Tactile Buttons: Intuitive interface for quick setting adjustments.
• Professional Flash Modes: Supports TTL, Manual, Multi (Stroboscopic), and High-Speed Sync (HSS) up to 1/8000s. Includes Flash Exposure Compensation (FEC) and Front/Rear Curtain Sync.
• Smart Distance Readout: Displays real-time effective flash range for precise exposure.
• Built-in 2.4G X Wireless System: Functions as a transmitter or receiver with up to 100m (328ft) range and 32 channels.
• Long-Lasting Power & Rapid Recycling: Powered by a 7.2V 2200mAh Li-ion battery, providing up to 650 full-power flashes with a 1.7-second recycle time. USB-C charging for convenience.

What's in the Box

• 1 × Light Body (Godox V480 TTL Flash)
• 1 × Mini Stand
• 1 × Storage Bag
• 1 × Lithium Battery
• 1 × Diffuser
• 1 × Adapter
• 1 × USB-C Charging Cable

Figure 2.1: Included Components of the Godox V480 TTL Flash.

3. Setup

3.1 Installing the Flash Unit

1. Slide the Godox V480 flash unit into your camera's hot shoe.
2. Rotate the lock ring clockwise to securely tighten the flash onto the hot shoe.

3.2 Battery Installation

1. Open the battery compartment cover on the side of the flash unit.
2. Insert the provided 7.2V 2200mAh Li-ion battery, ensuring it aligns with the direction indicators inside the compartment.
3. Close the battery compartment cover until it clicks securely.

Figure 3.2: The V480's 7.2V 2200mAh Li-ion battery and USB-C charging port.

4. Operating Instructions

4.1 Power On/Off and Screen Unlock

• Power On: Long-press the power button until the screen illuminates.
• Screen Unlock: If the screen is locked, rotate the dial or touch the screen as indicated to unlock it.
• Power Off: Long-press the power button again to turn off the unit.

4.2 Navigation and Interface

• Touchscreen: Swipe down to open the function menu, swipe up to go back. Swipe left/right to navigate between modes.
• Dial & Buttons: Double-tap the power button to open or exit the function menu. Rotate the dial to select options and press the SET button to confirm. The test flash button can be used to fire a test flash.

Figure 4.1: The intuitive 2-inch color touchscreen and tactile buttons for effortless control.

4.3 Flash Modes

• Manual (M) Mode: Adjust flash power by tapping +/- icons or dragging the slider. Rotate the dial to select, then press SET to confirm.
• TTL Mode: Tap the 'M' icon to switch to TTL mode. Adjust exposure compensation by tapping +/- icons or dragging the slider.
• Zoom Setting: Select Auto Zoom or Manual Zoom (24mm, 28mm, 35mm, 50mm, 70mm, 80mm, 105mm).
• Multi (Stroboscopic) Mode: In Multi mode, select group, power, number of flashes, and frequency (Hz).

4.4 Wireless Modes

The Godox V480 features a built-in 2.4G X wireless system, allowing it to function as both a sender (transmitter) and a receiver.

• Sender Mode: Pair with other Godox 2.4 GHz wireless flashes. Long-press the group box to switch between M/TTL/OFF. Tap +/- or drag the slider to adjust power for individual groups or all groups at once.
• Receiver Mode: Syncs wirelessly with an X3 transmitter. Tap the group icon to enter group settings, then choose the desired group (A, B, C, D, E).

4.5 Menu Settings

Access the menu to configure various flash parameters:

• Sender Flash: Enable or disable the sender function.
• Power Type: Adjust the flash power output.
• TCM: Convert TTL metering to Manual mode.
• m/ft: Switch between meters and feet for distance display.
• Standby: Enable or disable standby mode.
• Auto Off: Set the auto-off timer (e.g., 60 minutes).
• Model: Choose between 'Continue' or 'Interrupt' for modeling light behavior.
• Screen: Adjust screen brightness and standby time.
• Language: Select the display language (e.g., English).
• Factory Reset: Restore the flash unit to its factory default settings.
• Device Info: View model and firmware version (e.g., V1.00).

4.6 Other Functions

• Sync Mode: Select between Front-curtain sync, High-speed sync (HSS), or Rear-curtain sync.
• Optical Trigger: Enable S1 or S2 optical receiver mode for slave flash functionality.
• Beep: Turn the audible beep sound On or Off.
• Modeling Light: Adjust the 10-level LED modeling lamp brightness.
• Screen Lock: Long-press the screen or SET button for 2 seconds to lock/unlock the screen.
• Pull-Out Panels: The flash is equipped with an eye-light panel and a wide-angle diffuser panel.
• Sync Triggering: Use the 2.5mm sync port for cable or trigger connection.
• Type-C Charging: The USB-C port allows direct charging of the Li-ion battery.

5. Accessories

The Godox V480 TTL Flash is compatible with various accessories to enhance its functionality and light shaping capabilities.

• S2 Bracket: A versatile bracket for mounting the flash and attaching Bowens mount accessories.
• RFT-13 Pro Standard Reflector (Bowens mount): Used to direct and focus light.
• SFUV Softbox: A softbox for diffusing light and creating softer shadows.
• S65T Quick Release Umbrella Softbox: A portable softbox for quick setup and soft lighting.
• S-R2 Adapter: Allows the use of round head accessories with the V480 flash. Requires 2-3mm shims (not included).
• AK-R1 Kit: A comprehensive kit of magnetic modifiers for creative light control when used with the S-R2 adapter.

Figure 5.1: Godox V480 with S2 Bracket and compatible accessories.

6. Specifications

7. Maintenance

• Cleaning: Use a soft, dry cloth to clean the flash unit. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid harsh chemicals or abrasive materials.
• Storage: Store the flash in a cool, dry place away from direct sunlight and extreme temperatures. Remove the battery if storing for extended periods.
• Battery Care: Charge the battery regularly, even if not in use, to maintain its lifespan. Avoid fully discharging the battery.
• Handling: Handle the flash unit with care to prevent drops or impacts, which can damage internal components.

8. Troubleshooting

If you encounter issues with your Godox V480 TTL Flash, please refer to the following common troubleshooting steps:

• Flash not firing: Check battery level, ensure the flash is securely mounted on the camera hot shoe, verify flash mode settings (TTL/M/Multi), and confirm wireless settings if using off-camera.
• Incorrect exposure: Adjust Flash Exposure Compensation (FEC) in TTL mode or manual power output in M mode. Check camera ISO, aperture, and shutter speed settings.
• Wireless sync issues: Ensure both sender and receiver units are on the same channel and ID. Confirm that the receiver is set to the correct mode (e.g., Receiver mode).
• Screen unresponsive: Try long-pressing the power button to restart the unit. If locked, rotate the dial or touch the screen to unlock.
• Battery not charging: Ensure the USB-C cable and adapter are properly connected and functional. Check for any debris in the charging port.

For further assistance, please contact Godox customer support.

9. Warranty and Support

The Godox V480 TTL Flash comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including warranty period and coverage details. Keep your proof of purchase for warranty claims.

For technical support, service, or spare parts, please visit the official Godox website or contact your local authorized dealer. You can also find additional resources and FAQs on the Godox support page.