HASWING Cayman T Electric Trolling Motor User Manual

Introduction

This manual provides comprehensive instructions for the safe and efficient operation, installation, and maintenance of your HASWING Cayman T Electric Trolling Motor. Please read this manual thoroughly before using the product to ensure proper function and to prevent damage or injury.

The HASWING Cayman T is a 12V 55LB electric trolling motor designed for transom mounting on fishing boats, suitable for both saltwater and freshwater environments. It features wireless remote control for versatile operation.

Safety Information

Always observe the following safety precautions:

• Read all instructions before operating the motor.
• Ensure the motor is securely mounted to the transom before use.
• Disconnect power before performing any maintenance or propeller inspection.
• Keep hands and feet clear of the propeller at all times, especially during operation.
• Use only a 12V deep cycle battery. Refer to the battery section for details.
• Do not operate the motor if it is damaged or malfunctioning.
• Always wear a personal flotation device (PFD) when operating a boat.

Package Contents

Verify that all components are present:

• HASWING Cayman T Trolling Motor (40-inch shaft)
• Wireless Remote Controller (Model 50802)
• 3-Blade Propeller
• Mounting Hardware
• User Manual

Note: A wired foot controller (Model 50805) is an optional accessory and may not be included with all packages.

Product Features

Setup and Installation

1. Mounting the Motor

1. Select a suitable location on the boat's transom for mounting. Ensure the mounting surface is strong enough to support the motor.
2. Position the transom mount bracket (T-transom mount) on the transom.
3. Secure the bracket using the provided mounting hardware. Ensure all bolts are tightened securely to prevent movement during operation.
4. Attach the trolling motor to the mounted bracket. Use the level lock bracket to secure the motor in place.

2. Battery Connection

The HASWING Cayman T requires a 12V deep cycle battery (minimum 105AH recommended). Lithium batteries may be used, but consult the battery manufacturer for compatibility and charging requirements.

• Ensure the motor is switched off before connecting the battery.
• Connect the positive (+) red cable from the motor to the positive (+) terminal of the battery.
• Connect the negative (-) black cable from the motor to the negative (-) terminal of the battery.
• Ensure all connections are tight and secure.

3. Propeller Installation

The motor comes with a 3-blade propeller. Ensure it is securely attached before operation.

• Align the propeller with the motor shaft.
• Secure it with the provided nut and washer. Do not overtighten.

Operating Instructions

1. Deploying the Motor

• Use the lift-handle to lower the motor into the water.
• Adjust the depth collar to ensure the propeller is submerged to the desired depth, typically at least 6 inches below the water surface.
• Secure the motor in the deployed position using the level lock bracket.

2. Using the Wireless Remote Control

The wireless remote control allows for steering and speed adjustments.

• Power On/Off: Press the power button to activate or deactivate the motor.
• Speed Control: Use the speed adjustment buttons to increase or decrease motor speed. The motor offers variable speed control.
• Steering: Use the left/right buttons to steer the motor. The motor provides 360-degree electric steering.
• Pairing: If the remote is not responding, refer to the troubleshooting section for pairing instructions.

3. Battery Level Indicator

The LED power reader on the motor head displays the battery charge level:

• Three lights: Full charge (100%)
• Two lights: Medium charge (50%)
• One light: Low charge (20%), recharge soon

4. Stowing the Motor

• Before moving the boat or leaving the water, ensure the motor is fully stowed.
• Use the lift-handle to raise the motor out of the water.
• Secure the motor in the stowed position using the level lock bracket to prevent accidental deployment or damage.

Maintenance

• After Each Use:
  • Rinse the motor thoroughly with fresh water, especially after saltwater use, to prevent corrosion.
  • Inspect the propeller for any fishing line, weeds, or debris. Remove any obstructions.
  • Check all electrical connections for corrosion or looseness. Clean and tighten as necessary.
• Propeller Inspection: Regularly check the propeller for chips, cracks, or bends. Replace damaged propellers to maintain efficiency and prevent vibration.
• Battery Care:
  • Keep battery terminals clean and free of corrosion.
  • Charge the deep cycle battery after each use.
  • Store the battery in a cool, dry place when not in use.
• Storage: When storing the motor for extended periods, ensure it is clean, dry, and disconnected from the battery. Store in a protected area.

Troubleshooting

Remote Control Pairing (Wireless Control Reset Key)

If your wireless remote control loses connection or needs to be re-paired:

1. Ensure the motor is connected to a power source.
2. Locate the wireless control reset key/button on the motor head (often near the battery display).
3. Press and hold the reset key for approximately 3-5 seconds until an indicator light on the motor or remote flashes.
4. Immediately press any button on the remote control. The indicator light should stop flashing, confirming successful pairing.
5. Test the remote control functions.

Specifications

Warranty and Support

For warranty information and technical support, please refer to the official HASWING website or contact your authorized dealer. Keep your purchase receipt as proof of purchase for warranty claims.

Manufacturer: Haswing

Brand: MTLAKEMOTOR (as listed on Amazon)

ASIN: B0FJ457NJ9