Introduction
Thank you for choosing the DREO DR-KMF001 Milk Frother. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read it thoroughly before first use and retain it for future reference.
Important Safety Instructions
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury.
- Do not immerse the base unit in water or other liquids.
- Ensure the power supply voltage matches the rating label on the appliance.
- Keep the appliance out of reach of children.
- Do not operate the appliance with a damaged cord or plug.
- Use only attachments recommended by the manufacturer.
- Unplug from outlet when not in use and before cleaning.
- Avoid contact with moving parts.
- Do not use outdoors.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Do not use for other than intended household use.
Product Components
Familiarize yourself with the parts of your DREO Milk Frother:
- Frothing Jug: Stainless steel pitcher for milk.
- Base Unit: Contains heating element and controls.
- Lid: Transparent lid for the frothing jug.
- Frothing Whisks: Different whisks for various foam types (e.g., dense, airy).
- Stirring Whisks: For heating milk without frothing or mixing powder drinks.
- Control Panel: LED display and buttons for mode selection.
Image: Internal components of the DREO Milk Frother, highlighting the impeller tip, micro-level screen, heating coil, and multi-stage programs for optimal frothing.
Setup
- Unpack: Carefully remove all packaging materials and ensure all components are present.
- Clean: Before first use, wash the frothing jug, lid, and whisks with warm soapy water. Rinse thoroughly and dry. The frothing jug is dishwasher safe.
- Placement: Place the base unit on a dry, flat, stable, and heat-resistant surface.
- Power: Plug the power cord into a grounded electrical outlet.
- Insert Whisk: Choose the appropriate whisk (frothing or stirring) and securely place it onto the shaft at the bottom of the frothing jug.
- Add Milk: Pour milk into the frothing jug, observing the MIN and MAX fill lines. For frothing, do not exceed the "MAX FOAM" line. For stirring/heating, do not exceed the "MAX STIR/MIX" line.
- Secure Lid: Place the lid firmly on the frothing jug.
Image: A hand pouring milk into the DREO Milk Frother, illustrating the internal MAX fill lines for various milk types and foam levels.
Operating Instructions
The DREO Milk Frother offers multiple modes for different beverages. Ensure the frothing jug is correctly placed on the base unit before operation.
- Power On: Press the power button to turn on the appliance. The LED display will illuminate.
- Select Milk Type (Froth Mode): Press the "MILK" button (Step 1) to cycle through different milk types (e.g., Milk, Half & Half, Almond Milk, Oat Milk, Soy Milk, Coconut Milk). This optimizes frothing for each type.
- Select Foam Type (Froth Mode): Press the "FOAM" button (Step 2) to choose your desired foam type (e.g., Hot Latte, Hot Flat-White, Hot Thick Foam, Cold Thick Foam, Hot Cappuccino).
- Adjust Speed & Temperature (Mix Mode): If using for stirring powder drinks, press the "SPEED" button (Step 1) to adjust mixing speed and "TEMP" button (Step 2) to select desired temperature (up to 149°F).
- Start/Stop: Press the "START" button (Step 3) to begin the selected program. The display will show a countdown timer. To stop the process prematurely, press the "START" button again.
- Serving: Once the program is complete, carefully remove the frothing jug from the base unit and pour the frothed milk into your beverage. For best results, pour within 30 seconds to 1 minute after frothing.
Image: The LED display of the DREO Milk Frother, illustrating the selection of various foam options such as Hot Cappuccino, Hot Latte, Hot Flat-White, Cold Thick Foam, and Hot Thick Foam.
Video: Official DREO demonstration of the BaristaMaker All-in-1 Milk Frother, showcasing its features and ease of use.
Choosing the Right Milk
For optimal frothing results, consider the following:
- Barista Milk Versions: These are formulated with the right balance of protein and fat for consistent frothing.
- High Protein Milks: Aim for milk with protein content ≥3% and fat content ≥3%. Check your milk's nutritional fact sheet.
- Plant-Based Milks: Some plant-based milks may yield less foam due to lower protein content. For better results, choose barista versions or consider adding 1 tbsp of protein powder per cup (add liquid before powder).
Image: Visual guide on selecting different milk types and the variety of foam options available with the DREO Milk Frother.
Video: A video demonstrating what milk to use and how for optimal frothing results with the DREO Milk Frother.
Maintenance & Cleaning
Regular cleaning ensures optimal performance and longevity of your frother.
- Unplug: Always unplug the appliance from the power outlet before cleaning.
- Remove Jug: Detach the frothing jug from the base unit.
- Disassemble: Remove the lid and the whisk from the frothing jug.
- Wash Jug & Lid: The stainless steel frothing jug and lid are dishwasher safe. For hand washing, use warm soapy water and a non-abrasive sponge. Rinse thoroughly.
- Clean Whisks: Wash the whisks with warm soapy water.
- Clean Base Unit: Wipe the exterior of the base unit with a soft, damp cloth. Do not immerse the base unit in water.
- Dry: Ensure all parts are completely dry before reassembling or storing.
Image: The DREO Milk Frother jug being rinsed under a faucet, and a whisk placed in a dishwasher rack, demonstrating easy cleaning.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Milk separates from froth / Foam breaks down quickly. | Proteins and fats in milk change composition. | Pour frothed milk within 30 seconds to 1 minute for best results. Gently swirl milk in the pitcher if waiting. |
| Poor quality froth, especially with plant-based milk. | Lower protein/fat content in milk. | Use higher protein milks (≥3g per 240ml) or barista versions. Incorporate 1 tbsp protein powder per cup (add liquid before powder). |
| Frother does not turn on. | No power or improper placement. | Ensure the frother is plugged in and the jug is correctly seated on the base. |
Specifications
- Brand: Dreo
- Model Name: DR-KMF001
- Material: Stainless Steel
- Product Dimensions: 5.31"W x 9.65"H
- Item Weight: 2.64 pounds
- Capacity: 15 ounces (450ml)
- Power Source: Corded Electric
- Wattage: 600 watts
- Special Feature: Ergonomic Handle, LED display, Dishwasher Safe Jug
Warranty & Support
DREO is committed to providing high-quality products and comprehensive after-sales service. Your satisfaction is our top priority.
- Return Policy: This product is sold and fulfilled by Amazon and is eligible for a 30-day refund/replacement.
- Damaged or Used Item: If you received a damaged or used item, please contact Amazon Support or DREO directly for a swift resolution within 24 hours.
- Protection Plans: Optional 3-Year and 4-Year Protection Plans are available for purchase.
For further assistance, please refer to the contact information provided in your product packaging or visit the official DREO website.
