VEVOR Racing Wheel Stand X-shaped Pro User Manual

1. Introduction

Thank you for choosing the VEVOR Racing Wheel Stand X-shaped Pro. This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your new racing wheel stand. Please read this manual thoroughly before use to ensure proper setup and safe operation.

This racing wheel stand is designed to enhance your simulation racing experience by providing a stable and adjustable platform for your gaming peripherals. It is compatible with a wide range of popular racing wheels, pedals, and shifters.

1.1. Package Contents

• VEVOR Racing Wheel Stand (X-shaped Pro) components
• Assembly hardware (screws, nuts, washers)
• Tools for assembly (e.g., wrenches, hex keys)
• User Manual

2. Compatibility

The VEVOR Racing Wheel Stand X-shaped Pro features pre-drilled holes for broad compatibility with major brands of racing wheels, pedals, and shifters. This allows for easy integration and future upgrades without compatibility concerns.

Image: The VEVOR Racing Wheel Stand shown with a user, highlighting compatibility with Logitech (G923, G920, G29, G27, G25), Thrustmaster (T300RS, TX F458, T500RS, T248), Fanatec Clubsport, Mad Catz, and Hori devices. Note that the simulator is not included.

2.1. Compatible Devices

• Logitech: G923, G920, G29, G27, G25
• Thrustmaster: T300RS, TX F458, T500RS, T3PA-PRO (F1/GT), T248
• Fanatec: Clubsport series
• Hori
• Mad Catz

3. Product Features

• Wide Compatibility: Pre-drilled holes for major racing wheel, pedal, and shifter brands.
• Stable Construction: Crafted from carbon structural steel with thick plates and strong welds for excellent stability and a wobble-free experience.
• Fully Adjustable: Adjustable wheel height, reversible shifter mount (left/right), and three pedal tilt angles (6°, 9°, 11.5°).
• Chair Stability: Includes stoppers on the base to prevent your gaming chair from sliding during intense gameplay.
• Quick Folding Design: Folds easily for convenient storage without requiring disassembly.

Image: The VEVOR Racing Wheel Stand in use, highlighting its deformation-resistant carbon steel construction, X-shaped stable structure, and anti-slip suction cup foot pads for zero wobble during immersive gaming.

4. Assembly Instructions

Follow these steps to assemble your VEVOR Racing Wheel Stand. It is recommended to lay out all parts and hardware before beginning assembly.

4.1. Unpacking and Part Identification

1. Carefully unpack all components from the box.
2. Verify that all parts listed in the package contents are present and undamaged. Refer to the included diagram for part identification.
3. Separate the hardware (screws, nuts, washers) and organize them for easy access.

Image: An exploded view of the VEVOR Racing Wheel Stand, showing the main frame, wheel plate, pedal plate, shifter mount, and various hardware components, along with a racing wheel, pedals, and shifter for illustrative purposes.

4.2. Step-by-Step Assembly

Note: Tighten all bolts securely once assembly is complete and adjustments are finalized. Avoid over-tightening.

1. Assemble the Base Frame: Connect the main base sections using the provided bolts and nuts. Ensure the X-shaped structure is correctly oriented for stability.
2. Attach the Pedal Plate: Secure the pedal plate to the base frame. Ensure the pre-drilled holes align with your specific pedal set.
3. Install the Upright Supports: Attach the two upright supports to the base frame. These will hold the wheel plate.
4. Mount the Wheel Plate: Secure the wheel plate to the top of the upright supports. This plate has multiple holes for various wheel models.
5. Attach the Shifter Mount: Install the shifter mount arm to either the left or right side of the main frame, depending on your preference.
6. Install Chair Stoppers (Optional): If desired, attach the chair stoppers to the rear of the base to prevent your gaming chair from moving.
7. Mount Your Peripherals: Attach your racing wheel, pedals, and shifter to their respective plates using the appropriate hardware. Ensure all connections are firm.

5. Adjustments

The VEVOR Racing Wheel Stand offers multiple adjustment points to customize your racing setup for optimal comfort and performance.

Image: Visual representation of the stand's adjustable features, including adjustable height for the wheel plate, adjustable angle for the wheel plate, universal gear lever mounting (left or right), and pedal angle selection (3° to 17°).

5.1. Wheel Height Adjustment

The height of the wheel plate can be adjusted to suit different user heights and seating positions. Loosen the adjustment knobs on the upright supports, slide the wheel plate to the desired height, and then securely tighten the knobs.

• Lowest Wheel Height from Base: 27.8 inches (705 mm)
• Highest Wheel Height from Base: 33.3 inches (845 mm)

5.2. Wheel Plate Angle Adjustment

The angle of the wheel plate can be tilted to provide a more ergonomic driving position. Loosen the angle adjustment bolts, set the plate to one of the 9 available angle levels, and re-tighten the bolts.

5.3. Shifter Position

The shifter mount can be installed on either the left or right side of the stand to accommodate both left-handed and right-handed drivers. Ensure the shifter is securely bolted to the mount.

5.4. Pedal Angle Adjustment

The pedal plate offers three tilt angles for customized pedal placement: 6°, 9°, and 11.5°. Adjust the bolts on the pedal plate to select your preferred angle.

6. Operation

Once assembled and adjusted, your VEVOR Racing Wheel Stand is ready for use. Connect your racing wheel, pedals, and shifter to your gaming console or PC according to their respective manufacturer's instructions.

6.1. Securing Your Chair

If you are using a gaming chair with wheels, position the chair's rear wheels into the integrated stoppers on the stand's base. This prevents the chair from sliding backward during intense racing sessions, maintaining a stable driving posture.

Image: A close-up view of the VEVOR Racing Wheel Stand's base, illustrating how the chair wheel stoppers keep a gaming chair securely in position, preventing movement during gameplay.

6.2. Cable Management

Utilize cable ties or Velcro straps (not included) to manage and secure the cables from your racing wheel, pedals, and shifter to the stand's frame. This helps prevent tangles and ensures a tidy setup.

7. Folding and Storage

The VEVOR Racing Wheel Stand features a quick folding design for easy storage without the need to disassemble your mounted peripherals.

Image: A three-step visual guide demonstrating how to fold the VEVOR Racing Wheel Stand: 1. Loosen bolts on both sides, 2. Fold the stand, 3. Lock it with the handle screw.

7.1. Folding Procedure

1. Ensure all peripherals are securely mounted and cables are managed to avoid snagging.
2. Loosen the main folding bolts on both sides of the stand.
3. Carefully fold the stand inward until it reaches its compact storage position.
4. Secure the stand in the folded position using the designated locking mechanism or handle screw.

Image: The VEVOR Racing Wheel Stand in its folded configuration, demonstrating its compact form factor for easy storage in smaller spaces or corners.

8. Maintenance

Regular maintenance will ensure the longevity and optimal performance of your racing wheel stand.

• Cleaning: Wipe down the stand with a soft, damp cloth to remove dust and grime. Avoid abrasive cleaners or solvents that could damage the finish.
• Hardware Check: Periodically check all bolts and nuts to ensure they are securely tightened. Re-tighten any loose fasteners to maintain stability.
• Moving the Stand: When moving the stand, lift it rather than dragging it to prevent damage to the floor or the stand's feet.

9. Troubleshooting

This section addresses common issues you might encounter with your VEVOR Racing Wheel Stand.

9.1. Stand Wobbles or Feels Unstable

• Check Fasteners: Ensure all assembly bolts and nuts are securely tightened. Loose connections can cause instability.
• Level Surface: Verify that the stand is placed on a flat, level surface. Uneven surfaces can lead to wobbling.
• Foot Pads: Ensure the anti-slip suction cup foot pads are clean and making full contact with the floor.

9.2. Peripherals Do Not Mount Correctly

• Hole Alignment: Double-check the alignment of the pre-drilled holes with your specific racing wheel, pedal, or shifter model. Some peripherals may require specific mounting points.
• Correct Hardware: Ensure you are using the correct mounting hardware for your peripherals. Refer to your peripheral's manual for specific bolt sizes if needed.

9.3. Difficulty Folding the Stand

• Loosen Bolts: Ensure the main folding bolts on both sides of the stand are sufficiently loosened before attempting to fold.
• Obstructions: Check for any cables or mounted accessories that might be obstructing the folding mechanism.

10. Specifications

Image: Diagram illustrating the dimensions of the VEVOR Racing Wheel Stand, including overall length, width, and height, as well as folded dimensions.

11. Warranty and Support

VEVOR products are designed for durability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official VEVOR website.

11.1. Customer Support

If you encounter any issues or have questions regarding your VEVOR Racing Wheel Stand, please contact VEVOR customer support. Contact details can typically be found on the VEVOR website or on the product packaging.

When contacting support, please have your product model (X-shaped Pro) and purchase information ready to assist with faster service.