1. Introduction
Thank you for choosing the VEVOR Top Loading Hot and Cold Water Cooler Dispenser. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new appliance. Please read this manual thoroughly before use and retain it for future reference.
Important Safety Information:
- Always ensure the water bottle is properly seated and water flows into the internal tanks before plugging in the unit.
- Do not plug in the power socket until water flows down after opening the hot water tap.
- Keep children away from the hot water dispenser to prevent burns.
- Place the dispenser on a flat, stable surface away from direct sunlight and heat sources.
2. Product Overview
The VEVOR Top Loading Water Cooler Dispenser provides convenient access to both hot and cold water. Its design accommodates 3 or 5-gallon water bottles, making it suitable for various environments.
Key Features:
- Efficient Hot & Cold Water Supply: Advanced compression refrigeration and internal heating technology provide hot water up to 187℉ (86℃) and cold water as low as 50℉ (10℃).
- Compatible with Multiple Water Buckets: Designed for 3 or 5-gallon water jugs.
- Convenient & Secure Operation: Features a child security lock for the hot water dispenser.
- Multiple Security Protections: Precise temperature control, automatic re-heating/insulation, and compressor overload protection.
- Easy to Clean and Maintain: Detachable bottom drip tray and smart seat.
- Quiet Operation: Operates at ≤50dB.
Image: The VEVOR water cooler dispenser with indicators for hot water (187℉) and cold water (50℉).
Image: The dispenser shown with both 3-gallon and 5-gallon water jugs, highlighting compatibility.
Image: A cutaway view illustrating the thick and sturdy panels of the dispenser, indicating a compression-resistant structure.
3. Setup
- Unpacking: Carefully remove the dispenser from its packaging. Inspect for any damage.
- Placement: Position the dispenser on a level, stable surface. Ensure there is adequate space around the unit for ventilation (at least 4 inches from walls).
- Install Water Bottle: Remove the cap from a 3 or 5-gallon water bottle. Place the bottle onto the smart seat at the top of the dispenser. Ensure it is seated firmly and water begins to flow into the internal tanks.
- Prime the System: Before plugging in, open the hot water tap and allow water to flow until it runs smoothly. This ensures the hot water tank is filled and prevents dry-boiling.
- Connect Power: Once water flows from the hot water tap, plug the power cord into a grounded electrical outlet.
- Activate Heating/Cooling: Locate the power switches on the back of the unit. Turn on the switch for cold water (usually green) and hot water (usually red) if desired. The indicator lights on the front panel will illuminate.
ATTENTION: DO NOT PLUG IN THE POWER SOCKET UNTIL WATER FLOWS DOWN AFTER OPENING THE HOT WATER TAP.
4. Operating Instructions
Dispensing Water:
- Place a cup under the desired water tap (red for hot, blue for cold).
- For cold water, simply press the blue lever.
- For hot water, first press the child security lock button (usually red) located above the red lever, then press the red lever to dispense. Release the lever to stop the flow.
Child Security Lock:
The hot water tap is equipped with a child security lock to prevent accidental dispensing of hot water and potential burns. Always engage this lock when not actively dispensing hot water, especially in households with children.
Image: Close-up of the dispenser's front panel, illustrating the cup-style dispensing levers and the child lock feature on the hot water tap.
5. Maintenance
Regular cleaning ensures optimal performance and hygiene of your water dispenser.
Cleaning the Drip Tray:
- The bottom drip tray is detachable. Regularly remove it to empty any accumulated water and clean it with mild soap and water.
- Rinse thoroughly and dry before reinserting.
Cleaning the Smart Seat:
- The smart seat (where the water bottle rests) is also removable for easy cleaning.
- Clean it with mild soap and water to prevent dirt buildup.
- Rinse thoroughly and ensure it is dry before placing a new water bottle.
Image: Illustrations demonstrating the removal of the detachable water tray and the detachable water support (smart seat) for easy cleaning.
6. Troubleshooting
If you encounter issues with your water dispenser, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| No water dispensing | Water bottle empty or not properly seated; internal tanks not filled. | Replace water bottle or ensure it is correctly seated. Open hot water tap to prime the system before plugging in. |
| Water not hot/cold | Heating/cooling switches off; unit not plugged in; insufficient time for heating/cooling. | Ensure unit is plugged in and power switches (hot/cold) are on. Allow 15-30 minutes for water to reach desired temperature. |
| Water leakage | Water bottle cracked; smart seat not properly installed; drain plug loose. | Check water bottle for cracks. Reinstall smart seat. Ensure drain plug at the back is secure. |
| Unusual noise | Unit not level; compressor working (normal operation); foreign object. | Ensure unit is on a level surface. Compressor noise is normal. Check for any obstructions. |
If the problem persists after attempting these solutions, please contact VEVOR customer support.
7. Specifications
Detailed technical specifications for the VEVOR Water Cooler Dispenser Model LM-YL1-1115B.
- Item Model Number: LM-YL1-1115B
- Placement Type: Top-loading Water Jug
- Hot and Cold Water Function: Yes
- Cooling Method: Compressor Cooling
- Heating Method: Internal Heating
- Child Lock Function: Yes
- Compatible Water Jug Capacity: 3 Gallon and 5 Gallon
- Color: Black
- Material: Stainless Steel + Plastic
- Net Weight: 22.6 lbs / 10.25 kg
- Product Dimensions (D x W x H): 11.02"D x 11.41"W x 36.41"H (280 x 290 x 925 mm)
Image: A detailed view of the dispenser's features, including panel indicator lights, main power buttons for cold and hot, a large heat dissipation vent, and the detachable water tray.
Image: The water dispenser with its key dimensions and specifications listed alongside.
8. Warranty and Support
For warranty information or technical support, please refer to the documentation included with your product or visit the official VEVOR website. Please have your model number (LM-YL1-1115B) and purchase details ready when contacting support.
VEVOR Official Website: www.vevor.com
