VACTechPro Cordless Stick Vacuum Cleaner

1. Important Safety Instructions

Please read all instructions carefully before using this appliance. Retain this manual for future reference.

• This appliance is for household use only. Do not use outdoors or on wet surfaces.
• Do not allow children to operate the vacuum cleaner. Close supervision is necessary when used near children.
• Do not pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without the dust cup and/or filters in place.
• Turn off the appliance before connecting or disconnecting the motorized brush, charging, or performing any maintenance.
• Use only as described in this manual. Use only manufacturer's recommended attachments.
• Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
• Exercise extra care when cleaning on stairs.
• If the charging cable is damaged, it must be replaced by the manufacturer or its service agent to avoid a hazard.

2. Product Overview

2.1 Components Included

The VACTechPro Ultra vacuum cleaner comes with the following components:

Figure 2.1: What's in the Box

• Motor Unit
• Floor Brush (Motorized)
• Telescopic Metal Tube
• Wireless Charging Stand
• Crevice Nozzle
• 2-in-1 Brush
• Sofa Brush
• Additional HEPA Filters (x2)
• Power Adapter
• Cleaning Brush
• HEPA Filter Storage Bag
• Instruction Manual

2.2 Key Features

• 600W HyperCore Pro Brushless Motor: Provides up to 55 kPa suction power for effective cleaning. Operates quietly at less than 62 dB.
• DualCore Battery Management System: Optimizes battery performance for stable suction and extended life. Offers up to 70 minutes runtime in Floor Mode.
• Smart Interactive LED Display: Shows suction power, battery status, and provides smart reminders for charging errors, temperature, full dustbin, and jams.
• 8-Layer High-Efficiency Filtration System: Utilizes MultiVortex air technology and activated carbon HEPA filter to capture 99.99% of microscopic dust and allergens, ensuring clean air output.
• Dual Anti-Tangle System: Features a V-shaped bristle and comb structure on the floor brush to prevent hair tangles, ideal for pet owners.
• GreenSight Technology: Integrated LED lights on the floor brush illuminate dust in dark areas.
• 1.6L Dust Cup: Large capacity dustbin reduces frequency of emptying.

3. Setup

3.1 Assembly

1. Attach the Telescopic Metal Tube: Insert the top end of the telescopic metal tube into the main motor unit until it clicks securely into place.
2. Attach the Floor Brush: Connect the motorized floor brush to the bottom end of the telescopic metal tube until it clicks.
3. Install Accessories: For handheld use, attach desired accessories (crevice nozzle, 2-in-1 brush, sofa brush) directly to the motor unit.

3.2 Charging

Before first use, fully charge the vacuum cleaner for approximately 4 hours.

Figure 3.1: Wireless Charging Stand

1. Mount the Charging Stand: Secure the wireless charging stand to a wall in a convenient location using the provided hardware.
2. Connect Power: Plug the power adapter into the charging stand and then into a wall outlet.
3. Charge the Vacuum: Place the vacuum cleaner onto the charging stand. The LED display will indicate charging status.
4. The battery can also be charged by connecting the adapter directly to the battery pack if removed from the main unit.

4. Operating Instructions

4.1 Powering On/Off and Mode Selection

Figure 4.1: Smart Interactive LED Display

1. Power On: Press the power button on the handle to turn on the vacuum cleaner. It will start in the default suction mode.
2. Change Suction Mode: Use the mode selection button on the LED display to cycle through the available modes: Floor Mode (up to 70 minutes), Carpet Mode (up to 40 minutes), and Turbo Mode (up to 20 minutes).
3. Power Off: Press the power button again to turn off the vacuum cleaner.

4.2 LED Display Functions

The smart HD LED touchscreen provides real-time information:

• Battery Indicator: Shows the remaining battery percentage.
• Suction Mode: Indicates the currently selected cleaning mode.
• Error Warnings: Displays alerts for charging errors, temperature issues, full dustbin, or brush roll jams.

4.3 Using Accessories

The VACTechPro Ultra comes with various accessories for different cleaning tasks:

Figure 4.2: Cleaning a Sofa with Sofa Brush

Figure 4.3: Cleaning a Table with Handheld Mode

• Sofa Brush: Ideal for cleaning upholstery, pet hair, and crumbs from sofas and other fabric surfaces.
• 2-in-1 Brush: Can be used as a short lint brush for delicate surfaces or as a wide suction nozzle for general cleaning.
• Crevice Nozzle: Designed to reach tight spaces, corners, and crevices in furniture or car interiors.
• Motorized Floor Brush: Features a V-shaped bristle and comb structure with 6 LED lights for effective cleaning on various floor types, including carpets and hard floors, and to illuminate hidden dust.

5. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your VACTechPro Ultra vacuum cleaner.

5.1 Emptying the Dust Cup

Figure 5.1: One-Button Dust Cup Emptying

1. Ensure the vacuum is turned off.
2. Hold the main unit over a trash bin.
3. Press the dust cup release button to open the bottom flap and empty the contents.
4. Close the flap securely until it clicks.

5.2 Cleaning Filters

The 8-layer filtration system includes multiple filters that require regular cleaning.

Figure 5.2: 8-Layer Filtration System

1. Remove the dust cup from the main unit.
2. Twist and pull out the filter components, including the metal filter and HEPA filter.
3. Tap off loose dirt from the filters over a trash bin.
4. Rinse the filters under cold running water. Do not use detergent.
5. Allow filters to air dry completely for at least 24 hours before reassembling. Do not use a dryer or heat source.
6. Replace filters every 3-6 months, or as needed, to maintain optimal performance.

5.3 Cleaning the Brush Roll

Figure 5.3: Dual Anti-Tangle Brush System

1. Ensure the vacuum is turned off and disconnected from power.
2. Press the release button on the side of the floor brush to remove the brush roll.
3. Use scissors or the provided cleaning tool to cut and remove any tangled hair or debris from the brush roll.
4. Wipe the brush roll and its housing with a dry cloth.
5. Reinsert the brush roll until it clicks into place.

6. Troubleshooting

If you encounter any issues, refer to the following troubleshooting guide:

7. Specifications

8. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase or visit the official VACTechPro website. Keep your proof of purchase for warranty claims.

Online Support: VACTechPro Store on Amazon