1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Ohniyou 42-inch Low Profile Ceiling Fan with integrated light, remote, and app control. Please read thoroughly before installation and use.
The Ohniyou GLX100 is a modern flush mount ceiling fan designed for indoor spaces such as bedrooms, dining rooms, kitchens, and living rooms, and suitable for covered patios. It features a quiet DC motor, dimmable LED lighting, and convenient control via both a remote and a smartphone app.
2. Important Safety Information
To reduce the risk of fire, electric shock, or personal injury, always follow these basic precautions:
- Ensure power is disconnected at the circuit breaker or main fuse box before installation, cleaning, or maintenance.
- All electrical wiring must be performed by a qualified and licensed electrician.
- Mount the fan to a ceiling joist or a securely supported outlet box capable of supporting the fan's weight (minimum 35 lbs).
- Do not use a full-range dimmer switch to control fan speed, as this may damage the fan motor and void the warranty.
- Only control the light on/off via a standard wall switch or the provided remote/app.
- Keep children and pets away from the fan during operation to prevent injury.
- Ensure fan blades are at least 7 feet (2.1 meters) from the floor.
3. Package Contents
Please verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, please contact customer support.
- Fan Motor (with safety rope)
- Fan Blades x 5 (double-sided: pure silver and woodgrain finish)
- Blade Holders x 5
- Mounting Bracket
- Canopy
- Lamp Panel (integrated 18W LED light source)
- Lampshade
- Remote Control
- Remote Receiver
- Screws and Self-tapping Screws
- Mounting Hardware
- User Manual
4. Setup and Installation
The Ohniyou 42-inch Low Profile Ceiling Fan is designed for straightforward installation, typically achievable within 30 minutes. All necessary mounting hardware and detailed instructions are included in the package.
4.1. Pre-Installation Steps
- Power Disconnection: Before starting any work, ensure the electrical power to the outlet box is turned off at the main fuse box or circuit breaker.
- Mounting Location: Confirm that the ceiling outlet box and its support structure can safely hold the weight of the ceiling fan (approximately 8 pounds).
- Unpack and Inspect: Carefully unpack all components and compare them with the
