Introduction
Thank you for choosing Voyager Barney Kids Trainer Skates. These skates are designed for active fun and adventures, featuring light-up wheels, ABEC 5 bearings for smooth rolling, and durable PVC construction. This manual provides essential information for setup, operation, maintenance, and safety to ensure a positive experience.
Safety Information
Always prioritize safety when using these trainer skates. Adult supervision is recommended at all times. Ensure the user wears appropriate safety gear, including a helmet, knee pads, and elbow pads, to prevent injuries. Skate in safe, open areas away from traffic, pedestrians, and uneven surfaces. Regularly inspect skates for wear and tear before each use.
What's in the Box
- 1 Pair of Barney Trainer Skates
Setup and Adjustment
These trainer skates are designed with adjustable sizing to accommodate growing feet, specifically US sizes 9-12. The secure strap system ensures a comfortable and safe fit.
Image: Voyager Barney Kids Trainer Skates, highlighting light-up wheels, ABEC 5 bearings, and secure fit.
Adjusting the Size
- Locate the adjustment mechanism, typically on the side or bottom of the skate.
- Unlock the mechanism (refer to specific markings on the skate for guidance, usually an arrow pointing to the desired size).
- Slide the front part of the skate forward or backward to select the desired size (9, 10, 11, or 12).
- Ensure the mechanism locks securely into place after adjustment.
Image: Side view of the Barney Trainer Skates, illustrating the adjustable sizing feature for US sizes 9-12.
Securing the Skates
The skates feature easy-to-use straps for a secure fit. Place the foot firmly into the skate. Fasten the straps, ensuring they are snug but not overly tight, to provide ankle support and prevent movement within the skate.
Operating Instructions
These trainer skates are designed for beginners, offering stability and ease of use.
Basic Skating Stance
- Stand with feet shoulder-width apart, knees slightly bent.
- Lean slightly forward to maintain balance.
Moving Forward
- Push off with one foot, gliding forward on the other.
- Alternate pushing with each foot to gain momentum.
Stopping
The skates are equipped with a rear stopper for controlled braking. To stop, gently shift your weight onto your heels and press the rear stopper firmly onto the ground. Practice this motion in a safe, open area until comfortable.
Image: Side view of the Barney Trainer Skates, illustrating the position of the rear stopper for braking.
Light-Up Wheels
The 54x32mm PU wheels feature an internal mechanism that illuminates as the wheels spin, adding a fun visual element to skating. No batteries are required for the wheel lights.
Image: Close-up of a light-up wheel on the Barney Trainer Skates, demonstrating the illumination feature.
Maintenance
- Cleaning: Wipe down the skates with a damp cloth after each use to remove dirt and debris. Avoid harsh chemicals.
- Wheel Inspection: Periodically check the wheels for excessive wear or damage. Ensure they spin freely.
- Bearing Care: The ABEC 5 bearings are designed for durability. Keep them clean and dry. Avoid skating through water or sand, which can damage bearings.
- Strap Check: Ensure all straps and buckles are in good working condition and securely fastened.
- Storage: Store skates in a cool, dry place away from direct sunlight.
Troubleshooting
- Wheels not lighting up: Ensure the wheels are spinning with sufficient speed. The lights are motion-activated and do not require batteries. If still not lighting, check for debris obstructing wheel rotation.
- Difficulty rolling: Check for debris in the wheels or bearings. Ensure the wheels are not overtightened.
- Skates feel loose: Re-adjust the sizing mechanism and tighten all straps and buckles for a secure fit.
Specifications
| Brand | Voyager |
| Model | Trainer Skates |
| Color | Barney |
| Size | US 9-12 (Adjustable) |
| Wheel Material | Polyurethane (PU) |
| Wheel Type | Artistic Skate Wheel, Light-Up |
| Wheel Size | 54 Millimeters |
| Bearing Type | ABEC 5 |
| Sole Material | Polyurethane |
| Closure Type | Lace-Up (Strap System) |
| Material | PVC |
| Item Weight | 1.77 Kilograms |
| Manufacturer | Sakar International |
| UPC | 021331151803 |
Warranty and Support
These skates are covered by a manufacturer's warranty from Sakar International. For warranty claims or product support, please refer to the contact information provided with your purchase or visit the official Voyager website.
