Introduction
This manual provides detailed instructions for the Electrolux Top-Load Washing Machine 600 SensiCare 6 kg, model EW6T426A. It covers essential information regarding the safe and efficient use of your appliance, including installation, operation, maintenance, and troubleshooting. Please read this manual thoroughly before using the washing machine and keep it for future reference.
The Electrolux 600 SensiCare washing machine is designed to offer optimal laundry care with features like the SensiCare System, Eco Time Manager, Steam Anti-Allergy program, and Soft Opening for user convenience.
Safety Information
Before installation and use, carefully read the supplied instructions. The manufacturer is not responsible for any injury or damage resulting from incorrect installation or use. Always keep the instructions in a safe and accessible location for future reference.
General Safety
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children should be supervised to ensure that they do not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
- Keep packaging materials away from children.
- Keep pets and children away from the appliance when it is operating or when the door is open.
Setup and Installation
Proper installation is crucial for the safe and efficient operation of your washing machine. It is recommended that installation be performed by a qualified technician.
Unpacking
- Remove all packaging materials and transport bolts before using the appliance. Failure to do so can cause serious damage to the appliance and property.
- Keep all packaging materials in a safe place for future transport.
Positioning
- Install the appliance on a firm, flat floor. Ensure there is adequate space around the machine for ventilation and access.
- Do not install the appliance behind a lockable door, a sliding door, or a door with a hinge on the opposite side to that of the washing machine, in such a way that a full opening of the washing machine door is restricted.
Water Connection
- Connect the water inlet hose to a cold water tap with a 3/4" thread. Ensure all connections are tight to prevent leaks.
- The drain hose must be correctly positioned to prevent water from flowing back into the machine.
Electrical Connection
- Ensure the power supply voltage and frequency match the ratings on the appliance's rating plate.
- The appliance must be earthed. Use a properly installed shock-proof socket.
Operating Instructions
Familiarize yourself with the control panel and various functions to achieve optimal washing results.
Image: Control panel of the Electrolux Top-Load Washing Machine, showing program selector, display, and function buttons.
Loading Laundry with Soft Opening
The Soft Opening system allows for easy and safe loading and unloading of laundry. Press the button to open the lid, and the internal drum will open gradually for convenient access.
- Ensure the drum is empty before loading.
- Distribute laundry evenly inside the drum.
- Close the lid securely before starting a cycle.
Using the SensiCare System
The SensiCare System automatically adjusts the washing cycle based on the load size using specialized sensors. This optimizes water, energy, and time consumption, providing gentle and sustainable washing even for smaller loads.
- Load your laundry.
- Select your desired program.
- The machine will detect the load and adjust settings automatically.
Program Selection and Options
Turn the program selector knob to choose from various washing programs such as Cotton, Synthetics, Delicates, Wool, Anti-Allergy Vapour, and more. The touch display allows for further customization.
- Eco Time Manager: Select this function on the control panel to reduce the cycle duration by up to four times, without compromising washing results.
- Steam Anti-Allergy Program: This program combines a wash cycle with steam to remove over 99.99% of bacteria and viruses* at temperatures above 60°C. It also reduces pollen and allergens for hygienically clean clothes. (*Tested for staphylococcus aureus, Enterococcus faecium, Candida albicans, Pseudomonas aeruginosa and MS2 Bacteriophage in external tests by Swissatest Testmaterialien AG in 2021.)
- Plus Soft Option: During the penultimate rinse, this option saturates garments with water and evenly distributes fabric softener within the drum, ensuring softer and fresher clothes for longer.
- Delay Start: Set a delayed start time for your wash cycle.
- Temperature and Spin Speed: Adjust these settings according to your fabric type and desired care.
Image: A stack of clean laundry next to a clock and a piggy bank, illustrating the time and energy saving benefits of the SensiCare and Eco Time Manager features.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your washing machine.
Cleaning the Exterior
- Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
Cleaning the Detergent Dispenser
- Periodically remove and clean the detergent dispenser drawer to prevent residue buildup. Rinse it under running water.
Cleaning the Drain Filter
- Regularly check and clean the drain filter to remove lint, coins, or other small objects that may obstruct drainage. Refer to the diagram in the specifications section for filter location.
Drum Cleaning
- Run a maintenance wash cycle (e.g., a hot wash with no laundry and a descaling agent) periodically to prevent odors and limescale buildup.
Troubleshooting
Before contacting service, refer to the following common issues and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not start | Power cord not plugged in; door not closed properly; program not selected; delay start active. | Check power connection; ensure door is fully closed; select a program and press start; check delay start setting. |
| Water not filling | Water tap closed; inlet hose kinked; water pressure too low. | Open water tap; straighten hose; check household water pressure. |
| Water not draining | Drain hose kinked or blocked; drain filter clogged. | Straighten or clear drain hose; clean drain filter. |
| Excessive vibration/noise | Transport bolts not removed; machine not level; uneven load. | Remove transport bolts (if applicable); adjust leveling feet; redistribute laundry evenly. |
| Poor washing results | Incorrect detergent dosage; overloaded machine; wrong program selected. | Use correct detergent amount; do not overload; select appropriate program for fabric type. |
Specifications
Key technical specifications for the Electrolux Top-Load Washing Machine EW6T426A.
- Brand: Electrolux
- Model Number: EW6T426A (Internal: 913 148 480)
- Capacity: 6 Kilograms
- Dimensions (Depth x Width x Height): 60 cm x 40 cm x 87 cm
- Weight: 58 Kilograms
- Energy Efficiency Class: A
- Control Type: Touch
- Special Feature: High Efficiency
- Access Position: Top Load
- Color: White
- Operating Mode: Automatic
Image: Technical drawing illustrating the dimensions and connections of the Electrolux Top-Load Washing Machine.
Warranty and Support
For warranty information and customer support, please refer to the warranty card included with your product or visit the official Electrolux website. Keep your purchase receipt as proof of purchase for warranty claims.
If you encounter issues that cannot be resolved using the troubleshooting guide, please contact Electrolux customer service for assistance. Ensure you have your model number (EW6T426A) and serial number ready when contacting support.
You can find more information and support resources on the Electrolux Brand Store on Amazon.
