Olodumare King Size Upholstered Platform Bed Instruction Manual

1. Introduction

This manual provides essential instructions for the safe assembly, proper use, and maintenance of your Olodumare King Size Upholstered Platform Bed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

1.1 Safety Information

• Always assemble according to the provided instructions.
• Do not exceed the maximum weight recommendation of 1000 pounds (453 kg).
• Keep the area around the bed clear to prevent entrapment.
• Ensure the bed is stable and secure before use.
• For children and infants, use appropriate bedding materials and ensure the bed is properly secured to the wall if necessary.
• This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 warning).

2. Package Contents

Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.

2.1 Included Components

• Headboard
• Bed Frame Sections
• Solid Wood Slats
• Support Legs
• Assembly Hardware (bolts, washers, nuts, Allen wrench)

Refer to the detailed parts list included in your packaging for specific quantities and identification.

3. Assembly Instructions

Assembly is designed to be straightforward. Two adults are recommended for safe and efficient assembly. All necessary tools are included.

3.1 Preparation

1. Clear a spacious area for assembly.
2. Unpack all components and lay them out on a soft, clean surface to prevent scratches.
3. Identify all parts against the included parts list.

3.2 Step-by-Step Assembly

1. Attach Headboard to Side Rails: Secure the upholstered headboard to the main side rails using the provided bolts and Allen wrench. Ensure all connections are firm.
2. Assemble Bed Frame: Connect the footboard and remaining side rails to form the complete bed frame. Tighten all hardware securely.
3. Install Support Legs: Attach the central support legs to the crossbeams of the bed frame. These legs are crucial for stability and weight distribution.
4. Place Slats: Position the solid wood slats across the bed frame. The slats are designed to be closely spaced to evenly distribute weight and eliminate the need for a box spring. Each support point on the slats is covered with sponge stickers to prevent noise.

3.3 Mattress Height Adjustment

The bed frame is compatible with multiple mattress heights (6", 8", 10", 12") through different installation methods of the frame components. Consult the specific assembly diagrams in your package for instructions on adjusting the frame to your desired mattress height.

4. Operating Instructions

Once assembled, the Olodumare Platform Bed is ready for use. No box spring is required due to the robust slat system.

4.1 Mattress Placement

Place your mattress directly onto the installed slats. The embedded design of the frame surrounds the mattress, keeping it securely in place and preventing movement.

4.2 Weight Capacity

The bed frame is designed to support a maximum weight of 1000 pounds (453 kg). Do not exceed this limit to ensure structural integrity and safety.

4.3 Squeak-Free Design

The bed is engineered for quiet, undisturbed sleep. The closely spaced slats and embedded mattress design work together to prevent squeaks.

5. Maintenance

Regular maintenance will help preserve the appearance and longevity of your bed.

5.1 Cleaning the Upholstery

• Wipe clean with a damp cloth.
• Avoid harsh chemicals or abrasive cleaners, as these can damage the polyester fabric.
• For spills, blot immediately with a clean, dry cloth.
• Vacuum regularly with an upholstery attachment to remove dust and debris.

5.2 Frame Care

• Periodically check all bolts and connections to ensure they remain tight. Retighten if necessary.
• Avoid dragging the bed when moving it; lift it to prevent damage to the frame and floor.

6. Troubleshooting

If you encounter any issues with your Olodumare Platform Bed, refer to the following common solutions:

6.1 Missing Parts

If parts are missing upon delivery, do not attempt to assemble the bed. Contact Olodumare customer support immediately for replacement parts.

6.2 Bed Squeaks

• Ensure all assembly bolts are securely tightened.
• Verify that all slats are properly seated and not rubbing against the frame.
• Check that the central support legs are firmly on the floor and not loose.

6.3 Instability

• Recheck all connections and ensure they are fully tightened.
• Confirm that the bed is placed on a level surface.
• Ensure all support legs are making full contact with the floor.

7. Specifications

8. Warranty and Support

While specific warranty details are not provided in this manual, Olodumare products are typically covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation or contact customer support for detailed warranty information.

8.1 Returns

This product is eligible for a 30-day return policy. Please consult the retailer's return policy for specific terms and conditions.

8.2 Customer Support

For any questions, assistance with assembly, or to report missing/damaged parts, please contact Olodumare customer support. Contact information can typically be found on the product packaging or the retailer's website.