Introduction
Thank you for choosing the Lamicall Magnetic Phone Grip. This accessory is designed to enhance your mobile experience by providing a secure grip, a convenient kickstand, and compatibility with MagSafe systems. This manual will guide you through the setup, operation, and maintenance of your new phone grip.
What's in the Box
- Magnetic Phone Ring Holder x1
- Metal Strengthen Plate x1
- User's manual x1
Setup Instructions
Attaching the Magnetic Phone Grip
The Lamicall Magnetic Phone Grip is designed for easy attachment to MagSafe compatible iPhones (iPhone 12, 13, 14, 15, 16 series) or MagSafe magnetic phone cases. Simply align the grip with the MagSafe area on your device or case, and it will snap securely into place with a strong magnetic force.
Image: Secure one-hand holding with the Lamicall Magnetic Phone Grip.
Using the Metal Strengthen Plate (for Non-MagSafe Devices)
For non-magnetic cases or devices (excluding soft silicone/TPU/PP/TPE cases), use the included metal strengthen plate to enhance magnetic power. This allows the magnetic phone grip to be used with a wider range of phones, including Android models.
- Clean the back surface of your phone or case thoroughly.
- Use the provided template (if applicable) to find the optimal placement for the metal ring.
- Peel off the adhesive backing from the metal strengthen plate.
- Firmly press the metal plate onto the desired location on your device or case for at least 2 minutes to ensure strong adhesion.
- Once the metal plate is securely attached, you can then attach the Lamicall Magnetic Phone Grip to it.
Image: Illustration of applying the metal strengthen plate for non-MagSafe devices.
Video: This video demonstrates the attachment process of the Lamicall Magnetic Phone Ring Holder, highlighting its secure magnetic connection.
Operating Instructions
Using as a Finger Grip
The integrated finger ring provides a secure and comfortable way to hold your phone, reducing the risk of accidental drops. Simply pull out the arc-shaped ring and slide your finger through it. The upgraded internal damping ring allows for smooth 360° rotation, enabling comfortable single-hand operation for browsing, texting, or taking selfies.
Image: Demonstrating comfortable and secure one-hand phone holding.
Using as a Kickstand
The phone grip doubles as a desktop kickstand. Adjust the 360° rotating ring to achieve your desired viewing angle, whether vertical or horizontal. This feature is ideal for watching videos, video calls, or following recipes hands-free.
Image: The phone grip functioning as a versatile kickstand for various viewing angles.
Compatibility with Magnetic Car Mounts
The Lamicall Magnetic Phone Grip can securely attach to magnetic car mounts without needing to be removed. This provides a stable and accessible display for navigation or hands-free communication while driving.
Image: The phone grip securely attached to a magnetic car mount.
Video: This video demonstrates the various ways the Lamicall Magnetic Phone Ring Grip can be used, including as a stand and for secure holding.
Maintenance
To ensure the longevity and optimal performance of your Lamicall Magnetic Phone Grip, follow these simple maintenance guidelines:
- Cleaning: Wipe the grip with a soft, damp cloth to remove dust and smudges. Avoid harsh chemicals or abrasive materials that could damage the finish.
- Storage: When not in use, ensure the ring is folded flat against the base to prevent accidental snagging or damage.
- Magnetic Connection: Keep the magnetic surfaces clean and free of debris to maintain a strong connection.
Troubleshooting
Weak Magnetic Connection
- Check Compatibility: Ensure your phone or case is MagSafe compatible. If not, use the included metal strengthen plate.
- Proper Placement: Verify the grip is centered correctly over the MagSafe area or the metal plate.
- Metal Plate Adhesion: If using the metal plate, ensure it was pressed firmly for the recommended time (2 minutes) during installation.
Ring Loosens Over Time
The internal damping ring is designed for smooth rotation. While durable, continuous heavy use may lead to a slight loosening over time. If the ring becomes too loose to hold your phone securely as a kickstand, consider replacing the unit.
Difficulty Removing Grip for Wireless Charging
The Lamicall Magnetic Phone Grip is designed to be easily removable for wireless charging. To remove, gently twist and lift the grip from the side rather than pulling directly outwards. This method helps to overcome the strong magnetic force without excessive effort.
Video: This video demonstrates how to easily remove the magnetic grip from your phone, which is useful for wireless charging.
Product Specifications
| Feature | Detail |
|---|---|
| Brand | Lamicall |
| Model | Magnetic Phone Grip for MagSafe |
| Material | Metal |
| Grip Type | Ring Grip |
| Magnetic Force | Up to 4.4lbs (9.9lbs with metal plate) |
| Rotation | 360° Smooth Rotation |
| Thickness | 4.2mm |
| Weight | 1.12 ounce |
| Compatibility | iPhone 12/13/14/15/16 Series, MagSafe Cases, Android (with metal plate) |
Warranty and Support
For any questions, concerns, or support regarding your Lamicall Magnetic Phone Grip, please contact Lamicall customer service. Refer to the product packaging or the official Lamicall website for specific warranty details and contact information.