PARTPHONER Floor Lamp with Shelves Instruction Manual

1. Introduction

Thank you for purchasing the PARTPHONER Floor Lamp with Shelves. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new floor lamp. Please read these instructions thoroughly before use and retain them for future reference.

Figure 1: PARTPHONER Floor Lamp with Shelves overview.

2. Safety Information

• Ensure the lamp is unplugged before assembly, cleaning, or replacing the bulb.
• Do not exceed the maximum wattage specified for the bulb.
• Place the lamp on a stable, level surface to prevent tipping.
• Keep the lamp away from water or damp environments.
• Do not allow children to climb on the shelves or play with the electrical components.
• The shelves have a maximum loading capacity of 50 lbs. Do not overload.
• Use only the specified bulb type (E26 base, 9W LED bulb included).

3. Package Contents

Verify that all components are present before beginning assembly:

• Lamp Shade (Fabric)
• Shelf Panels (Wood)
• Support Poles (Metal)
• LED Bulb (9W, 800 lumen, 3 CCT)
• Assembly Hardware (Screws, Allen Wrench)
• Instruction Manual

Figure 2: Lamp shade and shelf material details.

4. Setup and Assembly

Assembly is designed to be straightforward and typically takes about 10 minutes. Follow these steps carefully:

1. Unpack all components and lay them out on a clean, flat surface.
2. Attach the first shelf panel to the base support poles using the provided hardware. Ensure all connections are secure.
3. Continue attaching subsequent shelf panels and support poles, working your way upwards.
4. Once the main frame is assembled, carefully place the fabric lamp shade onto the top frame.
5. Screw the included LED bulb into the lamp socket located under the lamp shade.
6. Plug the lamp into a standard electrical outlet.

Figure 3: Assembled floor lamp.

Assembly Video Guide

5. Operating Instructions

Power On/Off and Color Temperature Adjustment

The lamp is operated using a pull chain switch. The included LED bulb offers three color temperature settings: Warm White (2700K), Cool White (4000K), and Daylight White (5000K).

• To Turn On/Off: Pull the chain once to turn the lamp on or off.
• To Change Color Temperature: With the lamp on, pull the chain twice within 10 seconds to cycle through the three color temperature settings. The bulb has a memory function and will remember the last selected setting when turned off and on again.

Figure 4: Three color temperature settings of the LED bulb.

Light Setting Change Video Guide

6. Maintenance

Cleaning

• Always unplug the lamp before cleaning.
• Wipe the metal frame and wooden shelves with a soft, dry cloth.
• For the fabric lamp shade, use a lint roller or a soft brush to remove dust. Do not use liquid cleaners on the shade.
• Avoid using abrasive cleaners or solvents, as they may damage the finish.

Bulb Replacement

• Ensure the lamp is unplugged and the bulb has cooled down before attempting to replace it.
• Carefully unscrew the old bulb from the socket.
• Screw in a new E26 base LED bulb (max 9W).

7. Troubleshooting

8. Specifications

Figure 5: Product dimensions.

9. Warranty and Support

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official PARTPHONER website. Please have your model number (STR-FL-0164) ready when contacting support.