1. Introduction and Overview
The Godox iT30Pro-S is a compact and powerful mini camera flash designed for Sony DSLR cameras. It integrates a 2.4G Godox X wireless system, offering both master and slave modes for flexible lighting setups. This flash features TTL auto-exposure, a built-in diffuser, and a quick recycle time, making it suitable for various photographic needs. Its lightweight design and intuitive controls ensure ease of use for both beginners and experienced photographers.
2. Safety Information
- Read all instructions thoroughly before using the product to ensure safe operation.
- Keep the flash unit away from water and moisture. Do not operate with wet hands.
- Do not disassemble or attempt to repair the flash unit yourself. Refer to qualified service personnel.
- Use only the specified USB-C charging cable and compatible power sources.
- Avoid direct eye exposure to the flash, especially at close range, as it can cause temporary vision impairment.
- Keep out of reach of children.
3. Product Features
- Built-in 2.4G X Wireless System: Supports both master and slave modes for versatile multi-light control. Enables quick pairing with Godox X3 triggers or other Godox 2.4GHz wireless flashes.
- TTL Auto-Exposure: Automatically adjusts flash output for accurate exposure by metering light through the camera lens, simplifying operation for beginners.
- Touchscreen Control: Features a high-resolution touchscreen with intuitive parameters for easy adjustment. Includes a physical dial and button for control in challenging environments where touchscreen use might be inconvenient.
- Integrated Diffuser: A one-touch built-in diffuser provides softer, wider light coverage, ideal for reducing harsh shadows and improving skin tones.
- High Performance: Delivers approximately 560 full-power flashes per charge with a rapid 1.5-second recycle time. Supports 1/8000s high-speed sync (HSS) and front/rear curtain sync for creative photographic effects.
- Compact and Portable: Weighing only 120g, the iT30Pro-S is exceptionally lightweight and slips easily into any bag, making it ideal for on-location work and travel.
- Quick Mount, Quick Release: The redesigned hot shoe foot allows for fast and secure attachment and removal from your camera, streamlining your workflow.
- USB-C Fast Charging: The integrated lithium battery supports USB-C fast charging, allowing for convenient power replenishment between shoots.
4. Package Contents
Verify that all items are present in your package:
- 1 x Godox iT30Pro-S Flash Body
- 1 x USB-C Charging Cable
- 1 x Storage Bag
- 1 x Diffuser
5. Setup
5.1. Charging the Battery
Before initial use, fully charge the flash unit. Connect the provided USB-C cable to the flash's charging port and to a compatible USB power adapter (not included) or a computer USB port. The charging indicator will illuminate to show the charging status and turn off when fully charged.
5.2. Mounting the Flash
Slide the Godox iT30Pro-S onto your camera's hot shoe. Ensure it is fully inserted. Secure the flash by engaging the quick-release lock mechanism. To remove, disengage the lock and slide the flash off.
5.3. Power On/Off
Press and hold the power button located on the flash unit for a few seconds to turn the flash on or off.
6. Operating Instructions
6.1. Mode Selection
Use the touchscreen interface or the control dial and buttons to navigate and select different flash modes. Available modes typically include TTL (Through-The-Lens), Manual (M), Multi (Stroboscopic), S1, and S2 optical slave modes.
6.2. TTL Mode
In TTL mode, the flash automatically calculates the optimal light output based on the camera's metering system. This mode is recommended for quick and accurate exposure without manual adjustments. You can apply Flash Exposure Compensation (FEC) if needed to fine-tune the exposure.
6.3. Manual Mode (M)
In Manual mode, you have full control over the flash power output, typically adjustable from 1/1 (full power) to 1/128 power. Use the control dial to increase or decrease the power level according to your creative needs.
6.4. Wireless Operation (2.4G X System)
The iT30Pro-S can function as a master or slave unit within the Godox 2.4G X wireless system. To use:
- Set the flash to either Master (M) or Slave (S) mode via the touchscreen.
- Ensure the channel (CH) and group (GR) settings on the iT30Pro-S match those of your Godox X trigger (e.g., X3) or other Godox 2.4GHz flashes.
- For slave mode, the flash will be triggered by a master unit. For master mode, it can control other slave flashes.
6.5. Using the Built-in Diffuser
To deploy the built-in diffuser, simply flick the designated lever on the flash unit. This will extend the diffuser, providing a softer and wider spread of light. Flick the lever again to retract it.
6.6. High-Speed Sync (HSS)
Enable HSS mode to use the flash with shutter speeds faster than your camera's native flash sync speed (e.g., 1/250s). The iT30Pro-S supports HSS up to 1/8000s, allowing you to control ambient light in bright conditions or use wider apertures.
6.7. Front/Rear Curtain Sync
Select front-curtain sync (default) for the flash to fire at the beginning of the exposure. Choose rear-curtain sync for the flash to fire just before the shutter closes, creating a motion blur effect that trails behind the subject.
7. Maintenance
- Keep the flash unit clean and dry. Use a soft, lint-free cloth to wipe the exterior. Avoid using harsh chemicals or abrasive cleaners.
- Store the flash in a cool, dry place, away from direct sunlight and extreme temperatures, when not in use.
- Regularly inspect the hot shoe contacts for any dirt or corrosion. Clean gently with a dry cloth if necessary.
- If the flash will not be used for an extended period, ensure it is fully charged before storage and periodically recharge it to maintain battery health.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Flash not firing | Low battery; Flash not securely mounted; Incorrect camera/flash settings; Flash in sleep mode. | Charge battery; Re-mount flash securely; Check flash mode, channel, group, and camera flash settings; Press any button to wake flash. |
| Incorrect exposure (too dark/bright) | Incorrect FEC (Flash Exposure Compensation); Manual power setting too high/low; Subject too far/close. | Adjust FEC in TTL mode; Adjust manual power output; Reposition subject or adjust flash power. |
| Wireless connection issues | Mismatched channel/group; Obstructions; Interference; Low battery on trigger/flash. | Ensure all devices are on the same channel and group; Reduce distance or remove obstructions; Check battery levels of all wireless devices. |
| Flash recycles slowly | Low battery; High power output setting. | Recharge battery; Use lower power settings if possible. |
9. Specifications
| Brand | GODOX |
| Model Name | iT30Pro-S |
| Compatible Mounts | Sony |
| Flash Sync Speed | 1/8000s (High-Speed Sync) |
| Wireless Communication Technology | 2.4G Godox X System |
| Exposure Control Type | Automatic (TTL) |
| Weight | Approx. 120g |
| Full Power Flashes | Approx. 560 per charge |
| Recycle Time | Approx. 1.5 seconds |
| Power Source | Lithium Battery (USB-C rechargeable) |
| Included Components | GD-FRCX1376 |
| Color | Silver |
10. Warranty and Support
For detailed warranty information, please refer to the official Godox website or the warranty card included with your product. Keep your purchase receipt as proof of purchase for any warranty claims.
For technical support, troubleshooting assistance, or service inquiries, please contact your local Godox distributor or visit the Godox official support page. You may also find helpful resources and firmware updates on their website.