Introduction
Thank you for choosing the DUSKTEC Smart Floor Lamp. This intelligent lighting solution offers versatile control options, including a dedicated app and voice commands via Alexa. Enjoy a wide spectrum of colors, adjustable white light, and dynamic features to enhance your living space. Please read this manual carefully before installation and use to ensure proper operation and safety.
Safety Information
- Ensure the power supply is disconnected before assembly, installation, or maintenance.
- This product is designed for indoor use only. Do not expose to water or high humidity.
- Use only the provided LED bulb or a compatible E27 LED bulb with a maximum wattage of 10W.
- Do not attempt to disassemble or modify the lamp. This may void the warranty and pose a safety risk.
- Keep the lamp away from heat sources and direct sunlight.
- Ensure the base is placed on a stable, level surface to prevent tipping.
- If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
Package Contents
Verify that all components are present and undamaged:
- Floor Lamp (Base, Pole Sections, Lampshade)
- Smart LED Bulb (E27, 10W)
- Instruction Manual
Image: Overview of the DUSKTEC Smart Floor Lamp components, showing the included LED bulb, foot switch, height adjustment lever, and the stable metal base.
Assembly
Follow these steps to assemble your DUSKTEC Smart Floor Lamp:
- Unpack Components: Carefully remove all parts from the packaging and place them on a clean, flat surface.
- Assemble the Pole: Screw the pole sections together clockwise until secure.
- Attach the Base: Thread the assembled pole onto the lamp base and tighten clockwise until stable.
- Install the Bulb: Screw the provided E27 smart LED bulb into the lamp holder clockwise until it is firmly seated.
- Attach the Lampshade: Place the linen lampshade onto the lamp frame and secure it according to the design (usually by screwing a ring onto the bulb holder).
- Connect Power: Plug the power cord into a standard electrical outlet.
Image: The fully assembled DUSKTEC Smart Floor Lamp, ready for use.
Operating Instructions
1. Initial Setup and App Pairing (BRmesh App)
The DUSKTEC Smart Floor Lamp uses the BRmesh app for advanced control. No registration is required.
- Download the App: Search for "BRmesh" in your smartphone's app store (iOS or Android) and install it.
- Enable Bluetooth: Ensure Bluetooth is enabled on your smartphone.
- Power On Lamp: Plug in the lamp and turn it on.
- Open BRmesh App: The app should automatically detect the lamp within 5-8 meters. Follow the on-screen prompts to add the device.
Image: A user interacting with the BRmesh app on a tablet to control the smart lamp.
2. App Control Features
- RGB Color Change: Select from 16 million vibrant colors to create various atmospheres.
- Adjustable White Light & Dimming: Adjust brightness from 1% to 100% and color temperature from warm white (2700K) to cool daylight (6000K).
- Music Synchronization: Activate the music sync function in the app to make the lamp's colors change rhythmically with your favorite music.
- Timer Function: Set schedules for the lamp to automatically turn on or off at specific times, aligning with your daily routine.
- Dynamic Modes & Scenes: Choose from over 21 dynamic modes and 9 preset scenes for instant ambiance.
Image: The BRmesh app interface displaying a color wheel for selecting RGB colors, with the lamp illuminated in purple.
Image: Visual representation of adjusting white light temperature (2700K-6000K) and brightness (10%-100%) via the app.
Image: The app's timer function, allowing users to set automatic on/off times for the lamp.
3. Voice Control (Alexa & Siri)
The lamp is compatible with Alexa for direct voice control. Siri compatibility requires pre-configured commands.
- Alexa Integration: Enable the DUSKTEC skill in your Alexa app and discover devices. You can then use commands like "Alexa, turn on the lamp" or "Alexa, set the lamp to blue."
- Siri Integration: Configure custom shortcuts or scenes in your smart home app that can be triggered by Siri commands.
Image: Demonstrating voice control with Alexa, showing a smart speaker and the DUSKTEC lamp.
4. Manual Control
The lamp features a convenient foot switch for basic on/off control.
- Foot Switch: Press the foot switch located on the power cord to turn the lamp on or off.
5. Adjustable Height
The lamp's height can be adjusted to suit your needs.
- Height Adjustment: Loosen the adjustment knob on the lamp pole, slide the upper section to the desired height (between 152 cm and 175 cm), and then tighten the knob to secure it.
Image: The adjustable height feature of the DUSKTEC Smart Floor Lamp, showing minimum (152 cm) and maximum (175 cm) heights.
Maintenance
To maintain your DUSKTEC Smart Floor Lamp:
- Cleaning: Disconnect power before cleaning. Wipe the lamp base and pole with a soft, dry cloth. The linen lampshade can be gently dusted or spot cleaned with a damp cloth if necessary.
- Bulb Replacement: Ensure the lamp is unplugged and cool before replacing the E27 LED bulb.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power, bulb loose or faulty, foot switch off. | Check power outlet. Ensure bulb is screwed in tightly. Press foot switch. Replace bulb if necessary. |
| Cannot connect to BRmesh app. | Bluetooth off, lamp out of range, app issue. | Ensure Bluetooth is on. Move closer to the lamp (within 5-8m). Restart app/phone. Reset lamp (turn off/on 3 times). |
| Voice control (Alexa) not responding. | Not paired with Alexa, incorrect commands, internet issue. | Ensure lamp is paired with Alexa. Use correct commands. Check internet connection of Alexa device. |
| Light flickers or changes unexpectedly. | Unstable power, interference, faulty bulb. | Try a different power outlet. Move away from other electronic devices. Replace bulb. |
Specifications
| Brand | DUSKTEC |
| Model Number | BP-F078 |
| Product Dimensions | 25 x 25 x 45 cm (Base Diameter x Shade Width x Shade Height) |
| Adjustable Height | 152 cm to 175 cm |
| Weight | 3.1 kg (6.83 lbs) |
| Material | Metal (Base), Linen (Shade) |
| Bulb Type | LED (E27 Base) |
| Wattage | 10 Watts |
| Lumen Output | 1200 Lumens |
| Color Temperature | 2700K - 6000K (Adjustable White) |
| Color Options | 16 Million RGB Colors |
| Dimming | 1% - 100% Continuous Dimming |
| Control Method | BRmesh App (Bluetooth), Voice (Alexa, Siri via commands), Foot Switch |
| Power Source | Corded Electric |
| Voltage | 230 Volts (AC) |
| Special Features | Adjustable Height, Color Changing, Adjustable Color Temperature, App Control, Voice Control, Music Sync, Timer Function |
| Usage | Indoor Use Only |
Warranty and Support
DUSKTEC products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official DUSKTEC website. Keep your proof of purchase for warranty claims.