Important Safety Information
Please read and understand all instructions before assembly and use. Retain this manual for future reference.
- Always follow the assembly instructions carefully.
- Do not exceed the maximum weight capacity of 264 lbs (120 kg) per chair.
- Keep the chair away from heat sources and sharp objects to prevent damage to the fabric and foam.
- Always supervise children when they are using or around the chair.
- Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- 2 x Chair Backrests
- 2 x Seat Cushions (Upholstered)
- 4 x Front Legs
- 4 x Back Legs
- Hardware Pack (screws, washers, Allen wrench)
- Instruction Manual (this document)
Image: Two assembled HOMCOM dining chairs, showcasing the black wooden frame and gray upholstered seat. This image provides a visual reference for the complete product.
Setup and Assembly Instructions
Assembly is required. It is recommended to assemble the chairs on a soft, clean surface to prevent scratching. Two people may be required for easier assembly.
- Attach Front Legs to Seat Cushion: Carefully align the front legs with the pre-drilled holes on the underside of the seat cushion. Secure them using the provided screws and washers. Do not fully tighten yet.
- Attach Back Legs to Seat Cushion: Similarly, attach the back legs to the seat cushion, ensuring proper alignment. Secure with screws and washers, but do not fully tighten.
- Connect Backrest to Seat Cushion and Back Legs: Position the chair backrest. Align the top of the back legs with the backrest and the bottom of the backrest with the rear of the seat cushion. Secure with the appropriate screws.
- Tighten All Hardware: Once all components are loosely assembled, place the chair on a flat surface. Apply gentle downward pressure to ensure all parts are properly seated, then systematically tighten all screws and bolts using the Allen wrench until secure. Do not overtighten.
- Repeat for Second Chair: Follow the same steps to assemble the second chair.
Image: Rear view of an assembled HOMCOM dining chair, highlighting the slatted backrest and the connection points of the legs. This image can assist in understanding the chair's structure during assembly.
Operating Instructions
These HOMCOM dining chairs are designed for indoor use in dining rooms, living rooms, or similar settings. They are intended for seating one adult person per chair.
- Weight Capacity: Each chair has a maximum weight capacity of 264 lbs (120 kg). Do not exceed this limit to prevent damage or injury.
- Placement: Place chairs on a flat, stable surface. Avoid uneven floors to prevent wobbling.
- Movement: When moving the chairs, lift them rather than dragging them to prevent damage to the legs and floor.
Maintenance and Care
Proper care will extend the life and appearance of your dining chairs.
- Cleaning: Wipe clean with a damp cloth. For upholstered parts, use a mild fabric cleaner if necessary, and blot dry. Avoid harsh chemicals or abrasive cleaners.
- Hardware Check: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as needed to maintain stability.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading of the fabric and wood finish.
- Spills: Clean spills immediately to prevent staining, especially on the upholstered seat.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair wobbles after assembly. | Screws are not evenly tightened, or chair is on an uneven surface. | Place the chair on a flat surface. Loosen all screws slightly, apply gentle downward pressure to the seat, then re-tighten all screws evenly. Ensure the floor is level. |
| Parts do not align during assembly. | Incorrect orientation of parts or screws. | Review the assembly steps and diagrams carefully. Ensure each part is oriented correctly before attempting to secure it. Do not force parts together. |
| Screws become loose over time. | Normal wear and tear from use. | Periodically check and re-tighten all screws and bolts to maintain stability. |
Specifications
- Model: 83A-292V80BK
- Brand: HOMCOM
- Color: Black, Gray
- Material: Rubber Wood, Linen-feel Fabric, Foam, Polyester
- Overall Dimensions (per chair): 20.1" D x 17.1" W x 37" H (51 cm D x 43.5 cm W x 94 cm H)
- Seat Dimensions: 15.7" W x 15.4" D x 17.9" H (40 cm W x 39 cm D x 45.5 cm H)
- Backrest Height: 19.1" (48.5 cm)
- Weight Capacity: 264 lbs (120 kg)
- Assembly Required: Yes
- Item Weight (per chair): Approximately 11.5 lbs (5.2 kg) (Total 23 lbs for set of 2)
Image: Technical diagram illustrating the dimensions of the HOMCOM dining chair, including height, width, depth, and seat measurements. This provides precise measurements for planning and fit.
Warranty and Support
HOMCOM products are manufactured with quality and care. For specific warranty details, please refer to the documentation included with your purchase or visit the official HOMCOM website.
If you encounter any issues or have questions regarding your HOMCOM Wooden Dining Chairs Set, please contact HOMCOM customer support:
- Online Support: Visit the HOMCOM Store on Amazon for FAQs and contact options.
- Manufacturer: Aosom LLC
