cotsoco 7-in-1 Face and Neck Massager with Red Light Therapy

1. Introduction

This manual provides essential information for the safe and effective use of your cotsoco 7-in-1 Face and Neck Massager. Please read these instructions thoroughly before first use and retain for future reference.

Figure 1: The cotsoco 7-in-1 Face and Neck Massager device.

2. Product Overview

The cotsoco 7-in-1 Face and Neck Massager is designed to support skin care routines with multiple functions. It features an ergonomic dolphin-shaped design for comfortable handling and application to facial and neck contours.

Key Features:

• Ergonomic Design: Cute dolphin shape with a 160-degree curvature for easy gliding across face and neck.
• 7 LED Light Modes: Offers various light wavelengths for different skin benefits.
• 3 Massage Modes: Includes CLEAN, EMS (Relax/Absorb), and HOT modes.
• Thermostatic Heating: Heats up to 113°F (45°C) to enhance product absorption.
• Gentle Vibration Massage: Aids in lymphatic drainage and muscle relaxation.
• Rechargeable: Approximately 2 hours for a full charge.

Figure 2: Device components including protective cover, LED lights, gear indicator, function indicator, On/Off button, and USB charging port.

3. Safety Information

• Do not use on broken, irritated, or infected skin.
• Consult a physician before use if you have any underlying skin conditions, medical implants, or are pregnant.
• Keep out of reach of children.
• Do not immerse the device in water. Clean with a damp cloth only.
• Discontinue use if you experience discomfort or adverse reactions.

4. Setup

4.1 Charging the Device

1. Connect the provided USB charging cable to the charging port on the device.
2. Plug the other end of the USB cable into a compatible USB power adapter (not included).
3. The indicator light will show charging status. A full charge typically takes approximately 2 hours.
4. Disconnect the device once fully charged.

5. Operating Instructions

5.1 Preparation

1. Cleanse your face and neck thoroughly.
2. Apply a small amount of your preferred conductive gel, serum, or moisturizer evenly to the treatment area.

5.2 Power On/Off and Mode Selection

1. To power on the device, long press the power button for 2 seconds.
2. Press the power button briefly to cycle through the 3 massage modes:
• CLEAN Mode: Designed for deep pore cleansing.
• EMS Mode (Relax/Absorb): Helps relax skin and improve absorption of skincare products.
• HOT Mode: Provides soothing heat (up to 113°F / 45°C) to rejuvenate skin.
3. The device also features 7 different LED light modes. These lights automatically change or can be selected depending on the chosen massage mode.
• Red Light (630nm): Anti-aging, promotes collagen production.
• Blue Light (415nm): Soothes inflammation, calms sensitive skin.
• Green Light (525nm): Smooths wrinkles and fine lines.
• Purple Light (390nm): Promotes lymphatic drainage.
• Yellow Light (590nm): Reduces melanin production.
• Cyan Light (490nm): Reduces skin tension and swollen capillaries.
• White Light Mix: Relaxes skin and accelerates growth and healing of skin cells.
4. To power off the device, long press the power button again.

Figure 3: Overview of the 7 LED light colors and their specific skin care functions.

5.3 Application

1. Gently glide the device across your face and neck in upward strokes.
2. For relaxation or product absorption, use gentle, circular motions.
3. When using the HOT mode, apply gentle pressure.
4. Recommended usage is 5-10 minutes per session.

Figure 4: Visual guide demonstrating the application steps for the face and neck massager.

6. Maintenance

6.1 Cleaning

After each use, wipe the device head with a soft, damp cloth. Do not use abrasive cleaners or immerse the device in water.

6.2 Storage

Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the protective cover is placed over the device head when not in use.

7. Troubleshooting

• Device not turning on: Ensure the device is fully charged.
• No vibration: Ensure the device is in contact with your skin. The vibration function is activated upon skin contact.
• Lights not changing: Briefly press the power button to cycle through the modes and associated lights.
• Reduced effectiveness: Ensure sufficient conductive gel or serum is applied to the skin.

8. Specifications

9. Warranty and Support

cotsoco provides a 3-year warranty for this face and neck massager. For any questions or support needs, please contact our 24-hour online support team.

Contact information can typically be found on the product packaging or the official cotsoco website.