TREEWELL R-25B Remote Control Accessory User Manual

1. Introduction

Thank you for choosing the TREEWELL R-25B Remote Control Accessory. This remote is designed to provide convenient wireless control for your TREEWELL RF control wireless outlets, receivers, and light sockets. It features programmable and expandable capabilities, ensuring no interference with existing systems. This manual provides detailed instructions for setup, operation, and troubleshooting to help you maximize your product's functionality.

2. Safety Information

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

Do not expose the remote control to moisture or extreme temperatures.
Do not attempt to disassemble or repair the remote control.
Keep batteries out of reach of children. If swallowed, seek immediate medical attention.
Dispose of used batteries according to local regulations.
Ensure the receiver (outlet, light socket, etc.) is properly installed and rated for the connected appliance.

3. Product Overview

The TREEWELL R-25B is a versatile remote control accessory designed to enhance your smart home experience. It allows you to control up to 5 individual devices or all paired devices simultaneously.

Key Features:

Programmable and Expandable: Easily pair with additional TREEWELL wireless light switches, receiver kits, remote control outlets, and light sockets.
No Interference: Utilizes rolling/dynamic codes to prevent conflicts with other RF devices, allowing multiple systems in one location.
Multi-Device Control: Control up to 5 devices individually or all at once with dedicated ON/OFF buttons.
Extended Range: Strong RF signal provides up to 200 feet of remote range, working through walls, doors, and windows.
Button Labeling: Features extra space to label buttons for easy identification of controlled devices.

Image showing the TREEWELL remote control in a home setting, demonstrating 200ft long range and instant ON/OFF with no lag, with RF signal working through walls, doors, and ceilings. It also illustrates free pairing scenarios: one switch controls one outlet, multiple switches control one outlet, and one switch controls multiple outlets.

Figure 1: Remote control range and pairing flexibility.

Image illustrating how to expand your remote system freely with various TREEWELL devices. It shows different types of switches (wall switches, remote controls) and receivers (light bulb sockets, smart plugs, in-wall modules, outdoor light sensors) that can be freely paired.

Figure 2: Expandable system with various TREEWELL devices.

4. Setup

4.1 Battery Installation

The TREEWELL R-25B remote control requires one CR2032 battery (included). To install or replace the battery:

Locate the battery compartment on the back of the remote control.
Open the compartment cover.
Insert the CR2032 battery with the positive (+) side facing up.
Close the battery compartment cover securely.

4.2 Pairing the Remote Control with a Receiver

The R-25B remote control does not have a dedicated pairing button. Pairing is initiated from the receiver unit (e.g., wireless outlet, light socket, or receiver module). Follow these general steps:

Prepare the Receiver: Plug in or power on the TREEWELL receiver (e.g., an outlet plug).
Activate Pairing Mode on Receiver: Locate the pairing button on your TREEWELL receiver. Press and hold this button until its indicator light begins to flash. This indicates the receiver is in pairing mode. (Note: The exact duration and flashing pattern may vary slightly by receiver model. Refer to your receiver's specific manual for precise instructions.)
Pair with Remote: While the receiver's indicator light is flashing, press the desired "ON" button on your R-25B remote control. For example, if you want to control this receiver with button "1", press "ON 1".
Confirmation: The receiver's indicator light should stop flashing and remain solid, or turn off, to confirm successful pairing.
Test: Press the "ON" and "OFF" buttons on the remote for the paired channel to ensure the receiver responds correctly.

Important: This remote can be paired with multiple receivers, and multiple remotes can control a single receiver. Repeat the pairing process for each desired channel and receiver.

5. Operating Instructions

Once paired, operating the TREEWELL R-25B remote control is straightforward.

5.1 Individual Device Control

To turn on a device paired to a specific channel (e.g., Channel 1), press the ON 1 button.
To turn off a device paired to a specific channel (e.g., Channel 1), press the OFF 1 button.
Repeat for channels 2 through 5.

5.2 All Devices Control

To turn on all paired devices simultaneously, press the ALL ON button.
To turn off all paired devices simultaneously, press the ALL OFF button.

5.3 Labeling Buttons

The remote features small spaces next to each channel number where you can write or affix labels to easily identify which device each button controls. This enhances convenience and usability.

6. Maintenance

6.1 Cleaning

Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the surface.

6.2 Battery Replacement

If the remote control's range decreases or it becomes unresponsive, the battery may need replacement. Refer to section 4.1 for battery installation instructions. Use only CR2032 batteries.

7. Troubleshooting

Problem	Possible Cause	Solution
Remote control does not work or respond.	Battery is dead or incorrectly installed. Remote is not paired with the receiver. Receiver is unplugged or not powered. Remote is out of range.	Replace the CR2032 battery, ensuring correct polarity. Perform the pairing process as described in Section 4.2. Ensure the receiver is properly plugged in and receiving power. Move closer to the receiver. While the remote has a 200ft range, environmental factors can affect it.
Remote controls the wrong device.	Incorrect pairing.	Re-pair the remote with the desired receiver on the correct channel. You may need to clear existing pairings on the receiver first (refer to your receiver's manual).
Interference with other devices.	Unlikely, as the system uses dynamic codes.	Ensure all TREEWELL devices are properly paired. If interference persists, contact customer support.

8. Specifications

Feature	Detail
Brand	treewell
Model Number	R-25B
Connectivity Technology	Radio Frequency (RF)
Maximum Range	200 Feet (approx. 60 meters)
Number of Batteries	1 CR2032 (included)
Smart Home Compatibility	Smart Home Compatible (with TREEWELL RF receivers)
Unit Count	1.0 Count
Manufacturer	treewell

9. Warranty and Support

9.1 Warranty Information

TREEWELL products are designed for reliability and performance. Specific warranty details, including coverage period and terms, are typically provided with your product packaging or can be found on the official TREEWELL website. Please retain your proof of purchase for warranty claims.

9.2 Customer Support

If you encounter any issues or have questions not covered in this manual, please contact TREEWELL customer support. You can usually find contact information on the product packaging, the TREEWELL official website, or through your retailer.

treewell R-25B