TECKNET TK-SL070 Solar Pathway Lights User Manual

1. Introduction

The TECKNET TK-SL070 Solar Pathway Lights are designed to provide efficient and decorative outdoor lighting. These lights feature both warm white and RGB color-changing modes, are IP68 waterproof, and operate automatically from dusk till dawn after charging during the day. They are ideal for illuminating pathways, gardens, yards, and other outdoor spaces.

2. Safety Information

• Ensure the solar panel is exposed to direct sunlight for optimal charging.
• Do not attempt to disassemble or modify the product, as this may void the warranty and pose a safety risk.
• Keep the product away from fire or extreme heat sources.
• Dispose of batteries according to local regulations.
• Avoid placing the lights in areas prone to heavy foot traffic where they could be a tripping hazard.

3. Package Contents

Each TECKNET TK-SL070 package includes the following components:

• 8 x Solar Light Units (each consisting of a light head, extension pole, and ground stake)
• 1 x Instruction Manual

Image: Individual components of the TECKNET solar pathway light, including the solar panel, light shade, extension pole, and ground stake.

4. Setup

1. Unpack Components: Carefully remove all solar light units and accessories from the packaging.
2. Activate the Light: Locate the power button on the underside of the solar panel unit. Press the button once to activate the warm light mode. Press it again to switch to the RGB color-changing mode. Ensure the light is in your desired mode before assembly.
3. Assemble the Light: Connect the extension pole to the light head. Then, attach the ground stake to the bottom of the extension pole. Ensure all connections are secure.
4. Remove Protective Film: Peel off any protective film from the solar panel on top of the light unit.
5. Placement: Choose a location outdoors where the solar panel can receive direct sunlight for 6-8 hours daily. This ensures optimal charging and illumination performance. Avoid shaded areas.
6. Install into Ground: Gently push the assembled light unit, stake first, into the soil. Do not force it, as this may damage the stake. If the ground is too hard, moisten it first.

Image: Visual guide for assembling the light unit.

Image: Detail of the switch and battery compartment.

5. Operating Instructions

The TECKNET TK-SL070 Solar Pathway Lights are designed for simple, automatic operation.

• Automatic On/Off: Once activated and placed in a sunny location, the lights will automatically charge during the day. At dusk, they will turn on automatically in the selected light mode (warm white or RGB) and turn off at dawn.
• Switching Light Modes: To switch between the warm white and RGB color-changing modes, locate the button on the underside of the solar panel unit. Press the button once to cycle between the available modes.

Image: Automatic charging during the day and lighting at night.

Image: Comparison of Warm Lighting Mode and Auto Switch RGB Mode.

6. Maintenance

• Cleaning: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean solar panel ensures efficient charging.
• Battery Care: The lights use 1 AA rechargeable battery (included). If the light duration significantly decreases over time, the battery may need replacement. Use only rechargeable AA batteries of the same type and capacity.
• Winter Performance: In winter, due to shorter daylight hours and less intense sunlight, the charging time may be longer, and the illumination duration may be reduced. Ensure the solar panel is free of snow and ice.

Image: The lights are IP68 waterproof, heat-resistant, and frost-resistant, designed to withstand various weather conditions.

7. Troubleshooting

• Light does not turn on at night:
  • Ensure the power button on the underside of the solar panel is pressed to activate the light mode.
  • Verify the solar panel is receiving sufficient direct sunlight (6-8 hours) during the day.
  • Check if the solar panel is clean and free from obstructions.
  • The battery may be depleted or at the end of its lifespan. Consider replacing the AA rechargeable battery.
• Light duration is short:
  • Insufficient sunlight exposure during the day. Relocate the light to a sunnier spot.
  • The battery capacity may have degraded over time. Replace the rechargeable AA battery.
  • Weather conditions (e.g., cloudy days, winter) can affect charging efficiency.
• Inconsistent color changing or mode issues:
  • Ensure the button is pressed firmly to cycle through modes.
  • A low battery charge can sometimes affect light functionality. Allow for a full day's charge.

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official TECKNET website. Keep your purchase receipt as proof of purchase.