FULEN CL06-RGB Rechargeable Motion Sensor Ceiling Light User Manual

1. Introduction

This manual provides essential information for the safe and efficient operation of your FULEN CL06-RGB Rechargeable Motion Sensor Ceiling Light. Please read these instructions thoroughly before installation and use, and retain them for future reference.

2. Package Contents

• FULEN CL06-RGB Rechargeable Motion Sensor Ceiling Light (2 units for 2-pack)
• Remote Control
• USB-C Charging Cable
• Metal Mounting Plates (with adhesive backing)
• Mounting Screws and Wall Anchors
• User Manual

3. Product Features

• High-Capacity Battery: Equipped with a 12000mAh rechargeable battery for extended use.
• Motion Sensing Modes: Features DAY mode (motion detection all day), NIGHT mode (motion detection in low light), and STEADY mode (constant illumination).
• Remote Control: Adjust modes, colors, and brightness conveniently.
• Versatile Lighting: Offers 15 RGB color options and 3 color temperature settings (Warm, Cool, Daylight).
• Adjustable Brightness: 5 levels of brightness adjustment.
• Easy Installation: Cordless, no-drill magnetic installation.
• Wide Application: Suitable for various indoor spaces such as closets, bathrooms, pantries, garages, staircases, and corridors.
• Ultra-Thin Design: Approximately 0.69 inches thick.

4. Safety Information

• This product is designed for indoor use only. Do not expose to water or high humidity.
• Do not attempt to disassemble or modify the light. This may cause damage or injury and will void the warranty.
• Keep out of reach of children.
• Use only the provided USB-C cable for charging.
• Ensure the mounting surface is clean and dry before installation to ensure secure adhesion of the metal plate.
• When charging, the light can only operate at low brightness to prevent overheating. Full brightness is available when not charging.

5. Setup and Installation

5.1 Charging the Light

1. Locate the USB-C charging port on the side of the light.
2. Connect the provided USB-C cable to the light and to a compatible USB power adapter (not included).
3. The charging indicator light will turn red during charging and green when fully charged.
4. A full charge takes approximately 8 hours due to the large battery capacity.

Image: The FULEN CL06-RGB light connected to a USB-C cable for charging. The charging port is visible on the side of the light.

5.2 Mounting the Light

The light features magnetic attachment for easy installation and removal for charging.

1. Choose a clean, dry, and flat surface for installation.
2. Peel off the protective film from the adhesive side of the metal mounting plate.
3. Firmly press the metal strip onto the desired surface (ceiling or wall) for 3 seconds to ensure secure adhesion. For rough surfaces, use the included screws and wall anchors to secure the metal plate.
4. Align the magnets on the back of the ceiling light with the installed metal plate and attach the light.

Image: Step-by-step visual guide for installing the light using the adhesive metal plate and magnetic attachment.

Image: The back of the FULEN CL06-RGB light, highlighting the two integrated magnets for secure mounting.

6. Operating Instructions

6.1 Power On/Off

Locate the physical ON/OFF switch on the side of the light. Slide it to the "ON" position to enable operation. The light will only function when this switch is in the "ON" position.

Image: The physical ON/OFF toggle switch located on the side of the FULEN CL06-RGB light.

6.2 Using the Remote Control

The included remote control allows for convenient adjustment of all light functions.

Image: The remote control for the FULEN CL06-RGB light, showing buttons for power, sensor modes, brightness, color, and timer functions.

• ON/OFF: Power the light on or off.
• Day Sensor: Activates motion detection during both day and night.
• Night Sensor: Activates motion detection only in low-light conditions.
• Remote Control (Center Button): Switches between DAY, NIGHT, and STEADY modes.
• Brightness Adjustment: Use the sun icons to increase or decrease brightness (5 levels).
• Color Temperature: Cycle through 3 color temperatures (Warm, Cool, Daylight).
• RGB Colors: Cycle through 15 vibrant RGB color options.
• Timer: Set the light to shut off automatically after a scheduled time (e.g., 30 minutes).

7. Modes and Settings

7.1 Motion Sensing Modes

• DAY Mode: The light detects motion throughout the day (range of 1-16 feet) and automatically turns off after 30 seconds of no motion.
• NIGHT Mode: The motion sensor activates only in low-light conditions, turning the light on when motion is detected and off after 30 seconds.
• STEADY Mode: The light remains continuously on until manually turned off or the battery depletes.

Image: A FULEN motion sensor ceiling light illuminating a hallway as a person walks through, demonstrating its motion detection capability.

7.2 Color and Brightness Settings

• 15 RGB Colors: Choose from a spectrum of colors to create different ambiances.
• 3 Color Temperatures: Select between warm, cool, or daylight white light.
• 5 Brightness Levels: Adjust the light intensity to suit your needs.

Image: A bathroom scene with a FULEN ceiling light set to a purple RGB color, demonstrating the customizable ambiance.

8. Charging

The FULEN CL06-RGB light is equipped with a large 12000mAh battery. When the battery is low, the light output may decrease. Connect the provided USB-C cable to the charging port on the side of the light and to a suitable USB power source. The charging indicator will be red during charging and turn green when fully charged. A full charge typically takes about 8 hours. In motion sensor mode, the light can last for approximately 1-2 months on a single charge. In constant-on mode, it can operate for up to 12 hours, depending on the brightness setting.

9. Maintenance

• Clean the light with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ensure the motion sensor lens is clear of dust and obstructions for optimal performance.
• Store the light in a cool, dry place when not in use for extended periods.

10. Troubleshooting

• Light not turning on: Ensure the physical ON/OFF switch is in the "ON" position. Check if the battery is charged.
• Motion sensor not working: Verify the light is in DAY or NIGHT sensor mode. Ensure the sensor lens is clean and unobstructed. Check for sufficient ambient light if in NIGHT mode.
• Remote control not working: Ensure the remote control has working AAA batteries (not included). Point the remote directly at the light.
• Light output is dim: The battery may be low and require charging. If charging, the light operates at a lower brightness to prevent overheating.

11. Specifications

12. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact FULEN customer service directly. Keep your purchase receipt for warranty claims.

13. Product Videos