Hiicam Speed 20 Action Camera User Manual

1. Introduction

This manual provides essential instructions for the safe and effective operation of your Hiicam Speed 20 Action Camera. Please read this manual thoroughly before using the camera to ensure proper functionality and to prevent damage.

2. Package Contents

Verify that all items listed below are included in your package. If any items are missing or damaged, please contact customer support.

• Hiicam Speed 20 Camera Body
• Waterproof Housing
• Remote Control
• 64GB microSD Card
• 2 x Lithium Ion Batteries
• Battery Charger
• Various Mounting Accessories (e.g., helmet mounts, bike mounts, straps)
• USB Cable

Image: Contents of the Hiicam Speed 20 Action Camera package, including the camera, waterproof case, remote, batteries, charger, and various mounts.

3. Product Overview

The Hiicam Speed 20 is a versatile action camera designed for capturing high-quality video and photos in various environments, including underwater. Key features include:

• Video Resolution: Up to 5K at 30 frames per second (FPS)
• Photo Resolution: Up to 30 Megapixels (MP)
• Waterproof Capability: Up to 131 feet (40 meters) with included waterproof housing
• Image Stabilization: Electronic Image Stabilization (EIS) for smooth footage
• Lens: 170° Wide Angle
• Connectivity: Built-in Wi-Fi for smartphone app control and file transfer
• Display: 2-inch screen
• Storage: Supports microSD cards up to 256GB (64GB card included)
• Control: Remote control included

Image: Visual representation of the camera's key features, including 5K video, 30MP photos, 131ft waterproof, 5X zoom, 170° view, 2" screen, EIS, Smart APP, WiFi, and 2 batteries.

4. Setup

4.1. Battery Installation and Charging

1. Open the battery compartment cover on the bottom of the camera.
2. Insert a fully charged Lithium Ion battery, ensuring correct polarity.
3. Close the battery compartment cover securely.
4. To charge, insert the battery into the provided external charger and connect the charger to a USB power source using the USB cable. The indicator light will show charging status.

4.2. MicroSD Card Installation

1. Locate the microSD card slot on the side of the camera.
2. Insert the 64GB microSD card (or another compatible card up to 256GB, Class 10 or higher recommended) with the gold contacts facing the back of the camera until it clicks into place.
3. To remove, gently push the card until it springs out.

Image: The Hiicam Speed 20 camera shown alongside its battery charger and a 64GB microSD card, illustrating components for setup.

4.3. Waterproof Case Usage

For underwater use or protection in wet/dusty environments, the camera must be enclosed in the waterproof housing.

1. Ensure the waterproof housing is clean and free of debris.
2. Place the camera inside the housing, ensuring it fits snugly.
3. Close the latch securely. Perform a dry test without the camera before first use underwater to confirm no leaks.

Image: The Hiicam Speed 20 Action Camera enclosed in its waterproof case, being used underwater by two individuals.

4.4. Remote Control Pairing

The remote control allows for convenient operation from a distance.

1. Power on the camera.
2. Refer to the camera's settings menu to enable remote control pairing mode.
3. Activate the remote control (usually by pressing a button) to initiate pairing.
4. Once paired, the remote can be used to start/stop recording or take photos.

4.5. Smartphone App Connection

Connect your camera to a smartphone via Wi-Fi for remote control, live preview, and file management.

1. Download the official Hiicam app from your smartphone's app store.
2. On the camera, enable Wi-Fi from the settings menu. The camera will display its Wi-Fi network name (SSID) and password.
3. On your smartphone, go to Wi-Fi settings and connect to the camera's Wi-Fi network using the provided password.
4. Open the Hiicam app. The camera should now be connected, allowing you to control it and access media.

Image: The Hiicam Speed 20 camera displaying a video feed, with a smartphone showing the same feed via Wi-Fi, demonstrating app connectivity.

5. Operating Instructions

5.1. Power On/Off

• To power on, press and hold the Power/Mode button for a few seconds.
• To power off, press and hold the Power/Mode button again until the camera shuts down.

5.2. Mode Selection

Press the Power/Mode button repeatedly to cycle through different modes such as Video, Photo, Playback, and Settings. The current mode will be displayed on the screen.

5.3. Recording Video

1. Switch to Video mode.
2. Press the Shutter/OK button to start recording. A red indicator light will flash, and a recording icon will appear on the screen.
3. Press the Shutter/OK button again to stop recording.

Image: A skier in action, with an overlay indicating 5K 30FPS video and 30MP photo capabilities of the Hiicam Speed 20 camera.

5.4. Taking Photos

1. Switch to Photo mode.
2. Frame your shot using the screen.
3. Press the Shutter/OK button to take a photo.

5.5. Electronic Image Stabilization (EIS)

The EIS feature helps to reduce camera shake for smoother video footage. This is particularly useful during activities involving movement.

• Access the camera's settings menu.
• Locate the EIS option and toggle it On or Off as desired.

Image: A side-by-side comparison showing the effect of Electronic Image Stabilization (EIS) on the Hiicam Speed 20, with a blurred image on the left (EIS OFF) and a clear, stable image on the right (EIS ON) while cycling.

5.6. Wide Angle Lens

The 170° wide-angle lens captures a broad field of view, ideal for landscapes, group shots, and immersive action footage. This setting is typically active by default but can sometimes be adjusted in camera settings if narrower fields of view are available.

6. Maintenance

• Cleaning: Use a soft, lint-free cloth to clean the camera lens and screen. For the waterproof housing, rinse with fresh water after saltwater use and allow to air dry.
• Storage: Store the camera in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
• Battery Care: Do not expose batteries to high temperatures or disassemble them. Dispose of depleted batteries according to local regulations.

7. Troubleshooting

• Camera not turning on: Ensure the battery is fully charged and correctly inserted. Try using the second included battery.
• Recording issues (e.g., freezing, corrupted files): Format the microSD card in the camera's settings. Ensure you are using a Class 10 or higher microSD card.
• Wi-Fi connection problems: Ensure Wi-Fi is enabled on the camera and your smartphone. Restart both devices and try connecting again. Verify the correct Wi-Fi password.
• Unstable footage despite EIS: While EIS improves stability, extreme vibrations or rapid movements may still result in some motion blur or artifacts. Ensure mounts are secure.
• Water leakage in housing: Before each use, inspect the waterproof housing for cracks or damage. Ensure the rubber seal is clean and properly seated, and the latch is fully secured.

8. Specifications

9. Warranty and Support

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Hiicam website. Specific warranty terms and conditions may vary by region and retailer.