1. Safety Instructions
Please read all instructions carefully before assembly and use. Retain this manual for future reference.
- Ensure the power supply voltage matches the lamp's requirements.
- Do not operate the lamp with a damaged cord or plug.
- Avoid placing the lamp in unstable locations to prevent tipping. Use the provided anti-tip device for stability.
- Keep the lamp away from water or other liquids.
- Do not attempt to modify or repair the lamp yourself. Contact qualified service personnel.
- Unplug the lamp from the power outlet before cleaning or performing any maintenance.
2. Package Contents
Verify that all components are present and undamaged before beginning assembly. If any parts are missing or damaged, please contact customer support.
- Lamp Pole Sections with Integrated LED Strips
- Wooden Shelf Panels (4x)
- Base Plate
- Power Adapter with Foot Switch
- Remote Control
- Anti-tip Device Kit
- Assembly Hardware (screws, wrench, etc.)
- Instruction Manual
3. Assembly Instructions
Follow these steps to assemble your GOEBLESON F51LD05 Floor Lamp. It features a twist-to-lock frame for straightforward assembly.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Attach Base: Secure the lowest lamp pole section to the base plate using the provided hardware. Ensure it is stable.
- Assemble Lamp Pole: Connect the remaining lamp pole sections by twisting them together. The integrated LED strips should align vertically.
- Install Shelf Panels: Slide each wooden shelf panel into its designated slots on the lamp pole sections. Ensure they are seated firmly.
- Connect Power: Plug the power adapter into the lamp's power input.
- Secure Anti-tip Device: Attach the anti-tip device to the top of the lamp and secure it to a wall stud or appropriate anchor point to prevent accidental tipping, especially in households with children or pets.
4. Operating Instructions
Your GOEBLESON F51LD05 lamp can be controlled using either the remote control or the integrated foot switch.
4.1 Remote Control Operation
The remote control allows for comprehensive adjustment of the lamp's settings from a distance of up to 33 feet.
- Power On/Off: Press the Power button to turn the lamp on or off.
- Brightness Adjustment: Use the + and - buttons to increase or decrease brightness (10%-100% stepless dimming).
- Color Temperature (CCT) Adjustment: Press the CCT button to cycle through 3000K (Warm Light), 4000K (Natural Light), and 5000K (Cool White Light).
- Timer Settings: Select 1H, 2H, 4H, or 8H to set an automatic shut-off timer.
- Pre-set Modes: Use the dedicated buttons for 'Relaxing Mode', 'Sleeping Mode', 'Reading Mode', 'Baby Care Mode', and 'Working Mode' to instantly apply optimized lighting settings.
- Memory Function: The lamp remembers your last brightness and color temperature settings when turned off and on.
4.2 Foot Switch Operation
The foot switch provides basic control directly on the power cord.
- Tap: A quick tap on the foot switch will cycle through the available color temperatures (3000K, 4000K, 5000K).
- Long Press: Press and hold the foot switch to adjust the brightness level. Release when the desired brightness is reached.
4.3 360° Rotating Light Poles
The integrated light poles can be rotated 360 degrees to direct light precisely where needed, allowing for both direct and indirect illumination.
5. Maintenance
Proper maintenance ensures the longevity and optimal performance of your lamp.
- Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth to wipe down the lamp and shelves. Do not use abrasive cleaners or solvents.
- LED Care: The LED light source is integrated and designed for long-term use. It is not user-replaceable.
- Cord Inspection: Periodically check the power cord and plug for any signs of damage. If damaged, discontinue use and contact customer support.
6. Troubleshooting
If you encounter issues with your lamp, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power, loose connection, remote battery dead. | Check if the power adapter is securely plugged into the wall outlet and the lamp. Ensure the wall outlet is functional. Replace remote control batteries. |
| Remote control not responding. | Remote batteries are low or dead, obstruction, out of range. | Replace remote batteries. Ensure there are no obstructions between the remote and the lamp. Operate within the 33-foot range. |
| Brightness or color temperature cannot be adjusted. | Incorrect button press, temporary malfunction. | Ensure you are pressing the correct buttons. Try unplugging the lamp for a few minutes and then plugging it back in to reset. |
| Lamp is unstable. | Improper assembly, anti-tip device not installed. | Recheck assembly steps to ensure all sections are securely twisted and shelves are seated. Install the anti-tip device as instructed. |
If the problem persists after trying these solutions, please contact GOEBLESON customer support.
7. Specifications
- Model: F51LD05
- Product Dimensions: 10.6"D x 10.6"W x 64.2"H (27cm D x 27cm W x 163cm H)
- Lamp Type: Floor Lamp
- Style: Modern
- Brand: GOEBLESON
- Color: Rustic Brown Square
- Light Source Type: LED
- Color Temperature: 3000K-6000K (Adjustable)
- Dimming: 10%-100% Stepless Dimming
- Control: Remote Control, Foot Switch
- Material: Aluminum (frame), Wood (shelves)
- Number of Items: 1
8. Warranty and Support
GOEBLESON products are designed for quality and reliability. For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official GOEBLESON website. Please have your model number (F51LD05) and purchase details ready when contacting support.