Advwin Queen Floating Bed Frame with LED Lights and Storage Headboard User Manual

1. Introduction

Thank you for purchasing the Advwin Queen Floating Bed Frame. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and proper use of your new bed frame. Please read this manual thoroughly before assembly and retain it for future reference.

2. Safety Information

Please observe the following safety precautions during assembly and use:

• Keep all small parts and packaging materials away from children to prevent choking hazards.
• Assemble the bed frame on a soft, clean surface (e.g., carpet) to prevent scratches.
• Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as needed.
• Do not stand or jump on the bed frame.
• Do not exceed the maximum weight capacity of 300kg.
• Keep electrical components (LED lights) away from water and moisture.
• If any parts are missing or damaged, do not proceed with assembly. Contact customer support immediately.

3. Package Contents

Your Advwin Queen Floating Bed Frame is shipped in two separate packages. Please ensure all components are present before beginning assembly. The packages may not arrive simultaneously.

• 1 x Floating Bed Frame (includes headboard, side rails, footboard, slats, and hardware)
• 1 x Installation Instruction Manual
• LED Light Kit (pre-installed or separate, refer to specific instructions)

Image: Overview of the Advwin Queen Floating Bed Frame, showing its main components and overall dimensions. Note that the product comes in two boxes.

4. Setup and Assembly Instructions

Assembly of the Advwin Queen Floating Bed Frame is designed to be straightforward. All parts and tools are labeled. Follow the detailed steps provided in the included installation instruction manual.

4.1 General Assembly Steps:

1. Unpack Components: Carefully unpack all parts and lay them out on a soft, clean surface. Verify all parts are present against the parts list in the separate instruction manual.
2. Assemble Frame: Connect the headboard, side rails, and footboard using the provided hardware. Ensure all connections are secure.
3. Install Support Legs: Attach the 9 solid metal legs to the frame as indicated in the manual.
4. Install Slats: Place the plywood slats onto the frame. The Velcro slat design simplifies installation and helps prevent noise. Ensure slats are evenly spaced and secured.
5. Connect LED Lights: If the LED light strips are not pre-installed, follow the specific instructions for attaching and connecting them to the power source.

Image: Close-up view of the heavy metal frame, thick wood slats, and the hook and loop design, illustrating key structural components for assembly.

5. Operating Instructions

5.1 LED Lights Operation:

The bed frame features RGB LED light strips on the headboard and under the bed, controllable via a mobile application or a manual button.

• APP Control: Download the designated mobile application (refer to the separate LED light manual or packaging for QR code/app name). Connect your device to the LED lights via Bluetooth. The app allows you to:
  • Select from over 60,000 colors.
  • Adjust brightness levels.
  • Choose various dynamic modes (e.g., flashing, fading).
  • Set timing functions for automatic on/off.
  • Activate Music Sync mode, where lights change color and flash with music rhythm.
• Manual Button Control: A manual button is provided for basic control of the LED lights. This typically allows you to cycle through preset colors and modes, and turn the lights on/off.

Image: Illustration of the LED light control options, including the mobile application interface and the manual button, highlighting features like color selection, music mode, and timing.

5.2 Storage Headboard:

The upholstered headboard includes both open and hidden storage compartments.

• Open Storage Shelf: The upper shelf provides easy access for daily essentials such as mobile phones, glasses, or books.
• Hidden Storage Space: Behind the open shelf, there is a private, hidden storage compartment, often secured with magnetic buckles, for personal belongings.

Image: Detailed view of the storage headboard, showcasing the open shelf with smart PVC RGB LED light and the two independent hidden storage spaces with magnetic buckles.

6. Maintenance

Proper maintenance will extend the life and appearance of your bed frame.

• Cleaning Fabric: For general cleaning, gently vacuum the upholstered fabric to remove dust. For spills, blot immediately with a clean, damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Cleaning Frame: Wipe the metal and wood components with a soft, dry cloth.
• LED Lights: Ensure the LED strips are free from dust. Do not attempt to disassemble the LED components.
• Hardware Check: Periodically check all bolts and screws to ensure they remain tight. Re-tighten if necessary to maintain stability and prevent noise.

7. Troubleshooting

If you encounter any issues, refer to the following troubleshooting guide:

8. Specifications

Key specifications for the Advwin Queen Floating Bed Frame:

Image: Detailed diagram showing the specific dimensions of the Advwin Queen Floating Bed Frame, including height, width, and length measurements for various parts.

9. Warranty and Support

For warranty information or technical support, please refer to the warranty card included with your product or contact Advwin customer service directly. You can typically find contact details on the Advwin official website or through your purchase platform.

When contacting support, please have your model number (131007982) and purchase date available.