EWEADN Q1 Wireless Mouse Instruction Manual

Introduction

Thank you for choosing the EWEADN Q1 Wireless Mouse. This manual provides detailed instructions for setting up, operating, and maintaining your new mouse. The EWEADN Q1 features dual connectivity (Bluetooth & 2.4G), a silent click design, adjustable DPI levels, and a smart LED display for battery and DPI status, enhancing your productivity and user experience.

Package Contents

1 x EWEADN Q1 Wireless Mouse
1 x USB-C Charging Cable
1 x 2.4G USB Receiver (stored in the mouse)
1 x User Manual

Product Overview

Familiarize yourself with the key components of your EWEADN Q1 Wireless Mouse.

Diagram of EWEADN Q1 Wireless Mouse with numbered buttons

Image: Detailed diagram showing the layout of the EWEADN Q1 Wireless Mouse, highlighting its 6 buttons and smart display. Labels include Left Button, Right Button, Scroll Wheel, Smart Display, DPI Switch, BT1/BT2 Switch, 2.4G/OFF/BT Switch, and 2.4G Receiver.

Left Button: Standard left-click function.
Right Button: Standard right-click function.
Scroll Wheel: For vertical scrolling and middle-click.
Smart Display: Shows real-time battery percentage and current DPI level.
DPI Switch: Press to cycle through DPI settings (800-1200-1600).
BT1/BT2 Switch: Located on the bottom, used to switch between Bluetooth channels.
2.4G/OFF/BT Switch: Located on the bottom, to select 2.4G wireless, turn off, or activate Bluetooth mode.
2.4G USB Receiver: Stored in a slot on the bottom of the mouse.

Setup Instructions

1. Powering On

Locate the 2.4G/OFF/BT switch on the bottom of the mouse. Slide it to either the "2.4G" or "BT" position to power on the mouse.

2. Connecting via 2.4G Wireless

Remove the 2.4G USB receiver from its storage slot on the bottom of the mouse.
Plug the USB receiver into an available USB-A port on your computer or laptop.
Slide the 2.4G/OFF/BT switch on the mouse to the "2.4G" position.
The mouse should automatically connect to your device.

EWEADN Q1 mouse connecting to a laptop via 2.4G USB receiver and to a tablet via Bluetooth

Image: The EWEADN Q1 Wireless Mouse demonstrating its dual connectivity. A 2.4G USB receiver is plugged into a laptop, and the mouse is also shown connected to a tablet via Bluetooth, illustrating seamless switching between devices.

3. Connecting via Bluetooth

The EWEADN Q1 supports two Bluetooth channels (BT1 and BT2) for connecting to multiple devices.

Slide the 2.4G/OFF/BT switch on the mouse to the "BT" position.
Press the BT1/BT2 switch on the bottom of the mouse to select either BT1 or BT2. The corresponding indicator light will flash.
On your device (laptop, PC, smartphone, tablet), go to Bluetooth settings and search for "EWEADN Q1".
Select the mouse to pair. Once paired, the indicator light on the mouse will stop flashing.
Repeat steps 2-4 to connect to a second Bluetooth device using the other BT channel.

Video: This video demonstrates the EWEADN Q1 Wireless Mouse's smart display for battery and DPI levels, and its dual connectivity options. It shows how to switch between 2.4G and Bluetooth modes and highlights the convenience of the display.

Operating Instructions

1. DPI Adjustment

The EWEADN Q1 mouse offers 3 adjustable DPI settings: 800, 1200, and 1600. To change the DPI, press the DPI Switch button located near the scroll wheel. The Smart Display will show the current DPI level.

EWEADN Q1 mouse showing 3 DPI levels: 800, 1200, 1600

Image: An illustration of the EWEADN Q1 Wireless Mouse highlighting its 3 adjustable DPI levels (800, 1200, 1600), indicating how users can adapt the mouse sensitivity to their preferences.

2. Silent Click Technology

The left and right buttons of the Q1 mouse are designed for quiet operation, reducing click noise by 90%. This feature is ideal for environments where minimal disturbance is desired, such as offices, libraries, or quiet workspaces.

Graphic illustrating silent click technology of EWEADN Q1 mouse in various environments

Image: A visual representation of the EWEADN Q1 Wireless Mouse's silent click feature, showing reduced noise levels compared to typical environments like a city or library, emphasizing its suitability for quiet workspaces.

3. Smart Display for Battery & DPI

The integrated LED screen intuitively displays the remaining battery life as a percentage and the current DPI setting. This allows for proactive charging and quick adjustments without needing additional software.

EWEADN Q1 mouse with LED screen displaying battery percentage and DPI levels

Image: The EWEADN Q1 Wireless Mouse featuring its LED screen display, which clearly shows the battery percentage and the selected DPI level (800, 1200, or 1600).

Battery and Charging

The EWEADN Q1 mouse is equipped with a built-in 400mAh rechargeable battery. A full charge takes approximately 2 hours via the included USB-C cable and can provide up to 60 days of use.

EWEADN Q1 mouse being charged via USB-C cable, highlighting 400mAh battery, 1 minute auto-sleep, 180 hours usage, and 2 hour charge time

Image: The EWEADN Q1 Wireless Mouse connected to a USB-C charging cable, illustrating its long-lasting 400mAh rechargeable battery, 1-minute auto-sleep feature, 180 hours of usage time, and a 2-hour charging duration.

Charging Instructions:

Connect the USB-C end of the charging cable to the charging port on the front of the mouse.
Connect the USB-A end of the cable to a power source (e.g., computer USB port, USB wall adapter).
The Smart Display will indicate charging status.
Important: Use only the supplied cable for charging and avoid fast chargers to prevent damage.

Auto Sleep Mode

The mouse features intelligent power-saving technology. It automatically enters a low-power state after 1 minute of inactivity and a full sleep mode after 10 minutes. To wake the mouse from any sleep mode, simply double-click any button.

Maintenance

Keep the mouse clean by wiping it with a soft, dry cloth.
Avoid exposing the mouse to extreme temperatures, direct sunlight, or liquids.
Do not attempt to disassemble the mouse, as this may void the warranty.

Troubleshooting

Problem	Solution
Mouse not responding	Ensure the mouse is powered on. Check battery level on the Smart Display and charge if low. For 2.4G: Ensure the USB receiver is securely plugged in and the mouse is in 2.4G mode. For Bluetooth: Ensure Bluetooth is enabled on your device and the mouse is correctly paired to the selected BT channel. Try re-pairing.
Cursor movement is erratic or slow	Adjust the DPI setting using the DPI Switch. Ensure the mouse is used on a suitable surface (e.g., mouse pad). Clean the optical sensor on the bottom of the mouse.
Cannot connect via Bluetooth	Ensure the mouse is in Bluetooth mode and the correct BT channel (BT1/BT2) is selected. Make sure your device's Bluetooth is on and discoverable. Forget the device in your Bluetooth settings and try pairing again. Ensure the mouse is within the 10-meter (33 feet) operating range.

Specifications

Feature	Detail
Model Name	Q1
Connectivity Technology	Bluetooth, 2.4G USB-A
DPI Levels	800-1200-1600
Battery Capacity	400mAh (Rechargeable)
Charging Time	Approx. 2 hours
Usage Time	Up to 60 days (on a single charge)
Special Features	Ergonomic, Lightweight (65g), Portable, Silent Click, Smart Battery & DPI Display, Auto Sleep Mode
Compatible Devices	Laptop, PC, Smartphone, Tablet (Mac, Windows, Android, iOS systems)
Product Dimensions	3.66 x 2.52 x 0.04 inches
Item Weight	3.84 ounces

Warranty and Support

The EWEADN Q1 Wireless Mouse comes with a 48-month brand support. For any questions, troubleshooting assistance, or support, please contact our expert team.

Email Support: eweadnkeyboard@outlook.com

Customer support options including pre-sales Q&A, troubleshooting, accessories reissue, and returns/exchanges with email support contact.

Image: An illustration detailing the powerful after-sales backing provided by EWEADN, including pre-sales Q&A, troubleshooting, accessories reissue, and returns/exchanges, with an email address for support.

SEUNKWANG Q1