MAST TATTOO Archer Ultra Cordless Tattoo Machine User Manual

1. Introduction

The MAST TATTOO Archer Ultra is a state-of-the-art cordless rotary tattoo machine designed for professional artists. It features an integrated design for minimal vibration and noise, a smart digital control system, a high-efficiency Mcore motor, and an extended battery life. This manual provides essential information for the safe and effective operation and maintenance of your device.

Image: Overview of the Mast Tattoo Archer Ultra Cordless Tattoo Pen Machine, highlighting its advanced technology.

2. Key Features

• Revolutionary All-in-One Design: Integrated structure minimizes vibrations and noise for ultra-smooth operation across lining, shading, and coloring.
• Smart Digital Control System: Innovative digital interface for precise voltage adjustment and performance tracking. Allows saving settings for various tattooing techniques.
• High-Efficiency Mcore Motor: Features a 4.5mm extra-long stroke with double power conversion efficiency for deeper pigment saturation, ideal for bold lines and packing.
• Extended Battery Performance: A 2300mAh lithium cobalt oxide battery provides over 6.5 hours of continuous use and rapid recharging.
• Universal Compatibility: Compatible with all standard cartridge needles, offering flexibility for diverse tattooing styles.

Image: Detailed view of the Mcore motor system, emphasizing its innovative stacked design and power output.

3. Package Contents

Upon unboxing, please ensure all items listed below are present:

• MAST TATTOO Archer Ultra Cordless Tattoo Machine
• USB-C Charging Cable
• Additional Grips (quantity may vary)
• Ink Cups
• Practice Skin
• Black Tattoo Ink
• Disposable Cartridge Needles (various sizes)
• Protective Gloves

4. Setup

4.1. Charging the Device

1. Connect the provided USB-C charging cable to the charging port on the machine.
2. Plug the other end of the cable into a compatible 5V3A USB power adapter (not included).
3. The display will indicate charging status. A full charge takes approximately 1 hour and 20 minutes.
4. Once fully charged, disconnect the cable. The machine provides over 6.5 hours of working time.

Image: Diagram illustrating the high-capacity fast charging system of the Archer Ultra, highlighting the 2300mAh battery.

4.2. Attaching the Needle Cartridge

1. Ensure the machine is turned off.
2. Carefully insert the desired cartridge needle into the machine's front opening.
3. Twist the cartridge clockwise until it locks securely into place.

4.3. Adjusting the Grip and Needle Depth

1. Twist the grip section of the machine to adjust the needle depth.
2. Rotate clockwise to extend the needle and counter-clockwise to retract it.
3. Adjust to your preferred depth for lining, shading, or coloring.

5. Operating Instructions

5.1. Power On/Off

1. To power on, press and hold the power button (usually located on the side or front) for a few seconds until the display illuminates.
2. To power off, press and hold the power button again until the display turns off.

5.2. Adjusting Voltage

The Archer Ultra features a smart digital control system for precise voltage adjustment:

1. Once powered on, the current voltage will be displayed on the 1.09-inch color touchscreen.
2. To increase or decrease voltage, you can either:
• Tap the left (<) or right (>) arrows on the touchscreen for incremental adjustments.
• Slide your finger across the touchscreen to quickly increase or decrease the voltage.
3. The machine allows voltage adjustments from 5V to 12V.

Image: Close-up of the Archer Ultra's smart digital display, showing voltage adjustment controls.

5.3. Smart Control System

The smart control system allows you to track performance and potentially save preferred voltage settings for different tattooing techniques. Refer to the on-screen prompts for advanced features.

6. Maintenance

6.1. Cleaning

1. Always disconnect the machine from any power source before cleaning.
2. Use a soft, damp cloth with a mild, non-abrasive disinfectant to wipe down the exterior of the machine.
3. Do not immerse the machine in liquid.
4. Ensure all components are completely dry before storage or next use.

6.2. Storage

Store the machine in a clean, dry place away from direct sunlight and extreme temperatures. Use the provided carrying case for protection during transport.

7. Troubleshooting

• Machine not turning on: Ensure the battery is fully charged. Connect to the charger and verify the charging indicator.
• Inconsistent power/performance: Check that the needle cartridge is securely attached. Ensure the battery is adequately charged.
• Excessive vibration or noise: Verify that the needle cartridge is correctly installed and not damaged. Ensure all parts are tightened properly.
• Display issues: If the display is unresponsive or showing errors, try restarting the machine. If the issue persists, contact customer support.

8. Technical Specifications

Image: Visual representation of the machine's key parameters, including charging voltage, battery capacity, working time, stroke, and speed.

9. Safety Information

• This device is intended for professional use by trained individuals only.
• Always use sterile, single-use needle cartridges.
• Maintain a clean and sterile working environment.
• Wear appropriate personal protective equipment, including gloves.
• Do not attempt to disassemble or repair the machine yourself. Contact qualified service personnel for assistance.
• Keep the device out of reach of children.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase or visit the official MAST TATTOO website. Keep your proof of purchase for any warranty claims.