Klein Tools 33808 Grab-And-Go Impact Socket Set, SAE, 7-Piece Instruction Manual

Product Overview

The Klein Tools 33808 Grab-And-Go Impact Socket Set is a 7-piece SAE set designed for durability and convenience. It includes six common SAE socket sizes (1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch, 1/2-Inch, and 9/16-Inch) and a 1/4-inch impact adapter. Crafted from cold-forged, heat-treated Chrome Molybdenum (Cr-Mo) steel, these sockets are built to withstand high torque applications. The set features color-coded rings and bold stamped markings for quick size identification and comes with a carabiner for easy attachment to tool belts or bags.

What's Included

Six (6) SAE Impact Sockets: 1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch, 1/2-Inch, and 9/16-Inch
One (1) 1/4-Inch Impact Adapter
One (1) Socket Sleeve/Holder
One (1) Carabiner

Contents of the Klein Tools 33808 Grab-And-Go Impact Socket Set, showing six SAE sockets, a 1/4-inch impact adapter, a socket holder, and a carabiner. — Figure 1: Components of the 7-Piece SAE Impact Socket Set.

Setup and Assembly

Socket Placement: Ensure all six SAE sockets are securely seated in their designated slots within the orange silicone socket sleeve. The sockets are designed for a snug fit to prevent accidental dislodgement.
Adapter Integration: The 1/4-inch impact adapter can be stored in its dedicated slot on the socket sleeve. When ready for use, insert the hex end of the adapter into a 1/4-inch impact driver.
Carabiner Attachment: Use the included carabiner to attach the socket sleeve to your tool bag, belt loop, or backpack for convenient access and portability. Ensure the carabiner gate is fully closed after attachment to prevent loss.

The Klein Tools socket set attached to a backpack via its carabiner, demonstrating portability and quick access. — Figure 2: Socket set clipped onto gear for easy access.

Operating Instructions

This impact socket set is designed for use with 1/4-inch impact drivers. Follow these steps for effective operation:

Select Correct Socket: Identify the required socket size using the color-coded rings and bold stamped markings on each socket. The set includes 1/4", 5/16", 3/8", 7/16", 1/2", and 9/16" SAE sizes.
Attach Socket to Adapter: Firmly press the chosen socket onto the square drive end of the 1/4-inch impact adapter. Ensure it clicks into place for a secure connection.
Insert Adapter into Impact Driver: Insert the hex shank of the impact adapter into your 1/4-inch impact driver's chuck. Pull back the collar of the impact driver, insert the adapter, and release the collar to lock it in place.
Apply to Fastener: Position the socket squarely onto the fastener (nut or bolt head).
Operate Impact Driver: Engage your impact driver to tighten or loosen the fastener. The optimized wall thickness and hex pockets of the sockets are designed to maximize access and securely grip fasteners, even under high torque.

Close-up of a Klein Tools socket showing the stamped size marking '3/8' and a blue color-coded ring for quick identification. — Figure 3: Sockets feature stamped and paint infill markings for clear size identification.

A Klein Tools 1/2-inch socket attached to an impact driver, illustrating its impact-rated design. — Figure 4: Sockets are impact-rated for heavy-duty use.

Top-down view of the orange socket holder with embossed size markings for each socket slot, aiding organization. — Figure 5: Embossed size markings on the holder assist with organization.

Maintenance

To ensure the longevity and optimal performance of your Klein Tools Impact Socket Set, follow these maintenance guidelines:

Cleaning: After each use, wipe down sockets and the adapter with a clean, dry cloth to remove dirt, grease, and debris. For stubborn grime, a mild solvent or degreaser can be used, followed by thorough drying.
Storage: Store the sockets and adapter in the provided silicone sleeve. Keep the set in a dry environment to prevent rust and corrosion.
Inspection: Periodically inspect sockets for any signs of wear, cracks, or damage. Discontinue use of any damaged tools to prevent injury or further damage to fasteners.

Troubleshooting

If you encounter issues with your socket set, consider the following:

Socket Slipping: Ensure the correct size socket is being used for the fastener. Verify that the socket is fully seated on the impact adapter and the adapter is securely locked into the impact driver.
Difficulty Removing Sockets: If sockets are difficult to remove from the adapter or sleeve, ensure they are clean and free of debris. A slight twisting motion while pulling may help.
Adapter Not Engaging: Check that the 1/4-inch impact adapter's hex shank is clean and free of obstructions. Ensure your impact driver's chuck is functioning correctly and fully engaging the adapter.

Specifications

Feature	Detail
Brand	KLEIN TOOLS
Model Number	33808
Set Name	Grab-And-Go Impact Socket Set
Number of Pieces	7 (6 sockets, 1 adapter)
Material	Chrome Molybdenum Steel
Finish Type	Brushed
Item Weight	11.52 ounces
Item Length	6.64 inches
Drive System	External Hex
Drive Bit Application	Construction, Industrial
Bit Compatibilities	Impact Driver
UPC	092644338083

Warranty and Support

For warranty information and customer support regarding your Klein Tools 33808 Grab-And-Go Impact Socket Set, please contact the manufacturer directly. The manufacturer warranty description states: "Call vendor for warranty."

You can also visit the official Klein Tools store for additional product information and support resources: KLEIN TOOLS Store