Denon AVR-X2800H 7.2 Channel Receiver User Manual

Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Denon AVR-X2800H 7.2 Channel Receiver. Please read this manual thoroughly before using the receiver to ensure proper and safe operation.

The Denon AVR-X2800H is designed to deliver an immersive home theater experience with advanced audio and video capabilities, including 8K UHD support, wireless streaming via HEOS, and Bluetooth connectivity.

Package Contents

Before proceeding with the setup, please verify that all items listed below are included in your package:

• Denon AVR-X2800H 7.2 Channel Receiver
• Remote Control
• Setup Microphone (for Audyssey Room Calibration)
• FM/AM Antennas
• Power Cord
• Quick Start Guide
• Safety Instructions
• Surge Protector
• 5x HDMI Cables
• 3x RCA Cables
• 3x Aux Cables
• 2x Optical Cables
• Cable Straps
• Fiber Cloth

Figure 1: Denon AVR-X2800H Receiver and all bundled accessories, including remote, cables, and surge protector.

Setup

1. Placement

Place the receiver on a stable, flat surface with adequate ventilation. Ensure there is sufficient space around the unit for heat dissipation. Avoid placing it in direct sunlight or near heat sources.

2. Connecting Speakers

Connect your speakers to the appropriate speaker terminals on the rear panel of the AVR-X2800H. Ensure correct polarity (+ to + and - to -) for each speaker. The receiver supports 7.2-channel configurations or 5.2.2-channel setups for Dolby Atmos/DTS:X.

Figure 2: Rear panel connections, highlighting speaker terminals, HDMI inputs/outputs, and other audio/video ports.

3. Connecting Video Sources (HDMI)

Connect your video sources (e.g., Blu-ray player, game console, streaming device) to the HDMI INPUT ports on the rear panel. Use the HDMI OUT (MONITOR) port to connect the receiver to your TV or projector.

• The AVR-X2800H features six HDMI inputs, with three supporting 8K/60Hz and 4K/120Hz pass-through.
• Ensure your HDMI cables are rated for the desired resolution (e.g., Ultra High Speed HDMI for 8K).

4. Network Connection

For network features like HEOS, AirPlay 2, and firmware updates, connect the receiver to your home network. You can use either a wired Ethernet connection or the built-in Wi-Fi.

• Wired: Connect an Ethernet cable from your router to the NETWORK port on the receiver.
• Wireless: Attach the included Wi-Fi/Bluetooth antennas to the rear panel. Follow the on-screen setup assistant to connect to your Wi-Fi network.

5. Power Connection

After all other connections are made, connect the power cord to the receiver and then to a wall outlet or a surge protector. It is recommended to use the included surge protector to safeguard your equipment.

6. Initial Setup Assistant

Upon first power-on, the Denon Setup Assistant will guide you through the initial configuration, including speaker calibration (Audyssey), network settings, and input assignments. Follow the on-screen prompts carefully.

Operating Instructions

1. Basic Operation

• Power On/Off: Press the POWER button on the front panel or remote control.
• Input Selection: Use the SOURCE SELECT knob on the front panel or the input buttons on the remote (e.g., CBL/SAT, Blu-ray, Game) to switch between connected devices.
• Volume Control: Use the MASTER VOLUME knob on the front panel or the VOLUME +/- buttons on the remote.

Figure 3: Front panel overview, showing the Source Select and Master Volume knobs, display, and quick select buttons.

2. Audio Modes and Surround Sound

The AVR-X2800H supports various audio formats, including Dolby Atmos, DTS:X, and traditional surround sound modes. Use the SOUND MODE buttons on the remote to cycle through available modes (e.g., Movie, Music, Game, Pure Direct).

3. HEOS Multi-Room Audio

HEOS Built-in allows you to stream music wirelessly to other HEOS-enabled devices in your home. Download the HEOS app on your smartphone or tablet to control music playback, create groups, and access streaming services.

4. Bluetooth Streaming

To stream audio from a Bluetooth device:

1. Select "Bluetooth" as the input source.
2. Enable Bluetooth on your mobile device and select "Denon AVR-X2800H" from the list of available devices.
3. Once paired, you can play audio from your device through the receiver.

The receiver also features a Bluetooth transmitter for private listening with wireless headphones.

5. USB Playback

Connect a USB storage device to the front USB-A port to play high-resolution audio files (FLAC, ALAC, WAV, etc.) up to 24-bit/192 kHz.

Maintenance

1. Cleaning

Regularly wipe the exterior of the receiver with a soft, dry cloth. For stubborn smudges, slightly dampen the cloth with water. Do not use abrasive cleaners, solvents, or chemical sprays, as they may damage the finish.

2. Ventilation

Ensure that the ventilation openings on the top and sides of the receiver are not blocked. Proper airflow is crucial to prevent overheating and ensure long-term performance.

3. Firmware Updates

Periodically check for firmware updates via the receiver's network connection. Updates can provide new features, performance improvements, and bug fixes. Follow the on-screen instructions for any available updates.

Troubleshooting

For more detailed troubleshooting, refer to the comprehensive online manual or contact Denon customer support.

Specifications

• Model: AVR-X2800H
• Channels: 7.2 (or 5.2.2 for Dolby Atmos/DTS:X)
• HDMI Inputs: 6 (3x 8K/60Hz & 4K/120Hz compatible)
• HDMI Outputs: 2
• Video Support: 8K/60Hz, 4K/120Hz, HDR10+, Dolby Vision, VRR
• Audio Formats: Dolby Atmos, DTS:X, DTS Neural:X, Dolby Surround, etc.
• Wireless Connectivity: Wi-Fi, Bluetooth, HEOS Built-in, AirPlay 2
• Hi-Res Audio: Up to 24-bit/192 kHz (FLAC, ALAC, WAV) via USB-A
• Room Calibration: Audyssey MultEQ XT
• Dimensions (W x H x D): 17.1 x 6.6 x 13 inches (approx.)
• Weight: 27.9 pounds (approx.)
• UPC: 094148738789

Warranty and Support

Denon products come with a limited warranty. Please refer to the warranty card included with your product or visit the official Denon website for detailed warranty terms and conditions specific to your region.

For technical support, product registration, or service inquiries, please visit the Denon support website or contact their customer service line. Keep your purchase receipt and product serial number handy when contacting support.

Denon Official Website: www.denon.com