1. Introduction
The BOTSLAB G300H Plus-Front 4K Dash Cam is designed to provide high-quality video recording of your driving experience. Featuring a SONY STARVIS 2 sensor, 4K Ultra HD resolution, and a 170° wide-angle lens, it captures clear footage day and night. This manual provides instructions for setup, operation, and maintenance of your dash cam.
2. Package Contents
Verify that all items listed below are included in your package:
- Front Cam x 1
- 3M Tape x 2
- 64GB TF Card x 1
- Installation Pry Bar x 1
- Car Charger x 1
- USB-C Cable (3.5M) x 1
- Electrostatic Film x 2
- User Manual x 1
Image: All components included in the BOTSLAB G300H Plus-Front Dash Cam package, laid out for clear identification.
3. Product Overview
Familiarize yourself with the main components of your dash cam:
- Lens: Captures video footage.
- Screen: Displays live view, settings, and playback.
- Power Port (Type-C): Connects to the car charger for power.
- Micro SD Slot: For inserting the memory card.
- Power Button: Turns the device on/off.
- View Button: Toggles display modes.
- Switch Button: Navigates menus or confirms selections.
Image: The front view of the dash cam, highlighting the lens and screen, which displays the current time and date.
4. Setup & Installation
Follow these steps to install your dash cam:
4.1 Preparation
- Remove any protective films from the dash cam's screen and lens.
- Insert the provided 64GB Micro SD card into the Micro SD slot on the front camera. Ensure it clicks into place.
- Plug the car charger into your vehicle's cigarette lighter socket.
- Connect the USB-C cable from the car charger to the dash cam's power port.
- Once powered on, the dash cam will prompt you to format the SD card. Select 'Yes' to proceed. Formatting ensures proper functionality and clears any pre-existing data.
4.2 Mounting the Dash Cam
- Clean the windshield thoroughly where you intend to mount the dash cam. Ensure the area is dry and free of dust or grease.
- Place one of the electrostatic films on the cleaned windshield area, ideally right below the rearview mirror and away from any tinted sections. This film helps protect your windshield and makes removal easier.
- Attach the dash cam to the electrostatic film using the 3M adhesive pad. Press firmly for at least 30 seconds to ensure a strong bond.
- Use the camera's screen to preview its field of view and adjust the angle for optimal coverage. The lens should capture the road ahead clearly without obstruction.
- Route the power cable neatly along the headliner and vehicle trim using the provided pry tool. This keeps the cable out of sight and prevents it from interfering with driving.
4.3 Installation Video Guide
Video: An official installation guide for the Botslab G300H Plus Dash Cam Front, demonstrating the steps for setting up and mounting the device in a vehicle.
5. App Connection & Features
The Botslab app enhances your dash cam experience, allowing for remote control, video management, and settings adjustments.
5.1 Downloading and Pairing the App
- Scan the QR code provided in the manual or on the product packaging to download the Botslab APP from your device's app store.
- Open the app and follow the on-screen instructions to add your G300H Plus dash cam. This typically involves connecting to the dash cam's Wi-Fi network (SSID and password can be found on the dash cam screen or in the manual).
5.2 App Features
- Live View: Access real-time video feed from your dash cam on your smartphone.
- Video Playback & Download: Browse and play recorded videos directly from the dash cam. Download important footage to your phone.
- Video Editing: The app includes intelligent clipping and video merging functions, allowing you to quickly generate and share edited video segments (up to 16 seconds maximum).
- Settings Adjustment: Configure dash cam settings such as recording resolution, G-sensor sensitivity, parking mode, and more.
- 5GHz WiFi: Utilizes 5GHz Wi-Fi for faster data transfer speeds when accessing or downloading videos via the app.
Image: The Botslab mobile application interface, demonstrating its capabilities for capturing, editing, and sharing dash cam footage.
6. Operating Instructions
6.1 Recording Modes
- Continuous Loop Recording: The dash cam automatically records video in a continuous loop. When the memory card is full, the oldest unlocked footage is overwritten.
- Emergency Recording (G-Sensor): In the event of a sudden impact or collision, the built-in G-sensor automatically detects the event and locks the current video segment, preventing it from being overwritten.
- 24H Parking Monitoring: With an optional hardwire kit (not included, ASIN: B0FH2H9DDB), the dash cam can monitor your vehicle while parked. It supports time-lapse recording and collision-detected recording to capture incidents even when the vehicle is off.
Image: Visual representation of the Smart Parking Monitor features, including 24/7 surveillance, time-lapse recording, and collision-detected recording.
6.2 Voice Control
Control your dash cam hands-free using voice commands. This allows you to stay focused on the road. Common commands include:
- "Take photo"
- "Video start"
Image: A driver demonstrating the hands-free voice control feature, with prompts like "Take Photo" and "Video Start" displayed.
6.3 Built-in GPS
The integrated GPS module records your driving route, speed, and location data. This information can be viewed and analyzed via the Botslab app, providing a comprehensive record of your journeys.
Image: Illustration of the built-in GPS functionality, displaying a tracked route on a map with location and driving data.
6.4 WDR Night Vision & STARVIS 2 Sensor
Equipped with a SONY STARVIS 2 sensor and Wide Dynamic Range (WDR) technology, the dash cam delivers superior night vision. It captures clear, detailed footage in low-light conditions, ensuring license plates and road signs are visible after dark.
Image: A visual comparison demonstrating the enhanced clarity and detail provided by the Sony STARVIS 2 sensor in low-light and night driving conditions.
6.5 170° Wide Angle
The 170° wide-angle lens provides extensive road coverage, minimizing blind spots and capturing multiple lanes of traffic. This broad field of view is crucial for comprehensive incident recording.
Image: A diagram illustrating the 170° wide-angle coverage of the dash cam, showing how it captures a broader view of the road and surrounding lanes.
6.6 OTA Updates
The dash cam supports Over-The-Air (OTA) firmware updates. Regularly check the Botslab app for new updates to ensure your device has the latest features and performance enhancements.
6.7 Fatigue Driving Reminder
For your safety, the dash cam can provide reminders to take a break after extended periods of driving. This feature helps prevent driver fatigue.
7. Specifications
| Feature | Detail |
|---|---|
| Model Name | G300H Plus-Front |
| Video Capture Resolution | 4K Ultra HD |
| Sensor | SONY STARVIS 2 |
| Field Of View | 170 Degrees |
| Special Features | Built-In GPS, Built-In WiFi (5GHz), Compact Design, G-Sensor, Voice Control, WDR Night Vision, 24H Parking Mode |
| Connectivity Technology | Wi-Fi |
| Included Components | Memory Card (64GB), User Manual, Car Charger, USB-C Cable, 3M Tape, Installation Pry Bar, Electrostatic Film |
| Product Dimensions | 2.28"D x 4.13"W x 0.45"H |
| Item Weight | 12.3 ounces |
8. Maintenance
- Cleaning: Use a soft, dry cloth to clean the dash cam lens and screen. Avoid abrasive cleaners or solvents.
- SD Card Management: Regularly format the Micro SD card (at least once a month) to maintain optimal recording performance and prevent data corruption. Back up important footage before formatting.
- Firmware Updates: Keep your dash cam's firmware updated via the Botslab app to ensure the best performance and access to new features.
- Temperature: Avoid exposing the dash cam to extreme temperatures for prolonged periods.
9. Troubleshooting
If you encounter issues with your dash cam, refer to the following common solutions:
- Dash Cam Not Powering On: Ensure the car charger is securely plugged into the cigarette lighter and the USB-C cable is firmly connected to the dash cam. Check your vehicle's cigarette lighter fuse.
- Recording Errors/Skipped Frames: Format the Micro SD card regularly. Ensure you are using a high-speed (Class 10 or U3) Micro SD card. Replace the SD card if issues persist.
- App Connection Issues: Ensure your phone's Wi-Fi is connected to the dash cam's Wi-Fi network. If using Android Auto/Apple CarPlay, temporarily disconnect it as it may interfere with the dash cam's Wi-Fi connection. Restart both the dash cam and your phone.
- Poor Video Quality: Ensure the lens is clean and free from smudges. Verify the recording resolution in the settings is set to 4K.
- GPS Not Working: Ensure the dash cam has a clear view of the sky. Check GPS settings in the app.
10. Warranty & Support
BOTSLAB provides a warranty for its products. Please refer to the warranty card included in your package or visit the official BOTSLAB website for detailed warranty information and terms. For technical support, product inquiries, or customer service, please contact BOTSLAB customer support through the Botslab app or their official website.
