Bextgoo SQ1111U Mini Security Camera User Manual

1. Introduction

The Bextgoo SQ1111U is a compact and portable mini security camera designed for discreet video recording and photo capture. It features 1080P Full HD video resolution, 12-megapixel photo capability, night vision, and motion detection. This camera operates without Wi-Fi, storing all data directly onto a pre-installed 32GB Micro SD card. Its small size and versatile mounting options make it suitable for various indoor and outdoor monitoring applications.

2. Package Contents

Please verify that all items listed below are included in your package:

• 1 x Bextgoo SQ1111U Mini Camera
• 1 x 32GB Micro SD Card (pre-installed)
• 1 x Card Reader
• 1 x USB Cable
• 1 x Rotating Bracket
• 1 x Clip
• 1 x User Manual

3. Product Overview

Familiarize yourself with the camera's components and controls:

Image 3.1: Front and side view of the Bextgoo SQ1111U Mini Camera, highlighting the lens, indicator light, mode button, ON/OFF button, Micro TF card slot, USB port, and reset port. Dimensions are approximately 0.9 x 0.9 x 0.9 inches.

• Lens: Captures video and photo footage.
• Indicator Light: Displays current operating mode (e.g., 720P Standby, 1080P Standby, 12M Photo Standby).
• Mode Button: Press to cycle through different operating modes.
• ON/OFF Button: Powers the camera on or off.
• Micro TF Card Slot: For inserting the Micro SD card. A 32GB card is included.
• USB Port: For charging the camera and connecting to a computer for data transfer.
• Reset Port: Used to reset the camera if it becomes unresponsive.
• Infrared Lights: Six invisible infrared lights for enhanced night vision.

4. Setup

4.1 Charging the Battery

Before first use, fully charge the camera's internal 200mAh rechargeable battery. Connect the camera to a USB power source (e.g., computer, USB wall adapter) using the provided USB cable. The indicator light will show charging status (specific light behavior may vary, refer to the full manual for details). A full charge provides up to 100 minutes of usage time. The camera supports recording while charging.

4.2 Inserting the Memory Card

The camera comes with a 32GB Micro SD card pre-installed. If you need to replace it or ensure it's properly seated:

1. Ensure the camera is powered off.
2. Locate the Micro TF Card Slot.
3. Gently insert the Micro SD card with the gold contacts facing down until it clicks into place. To remove, push the card in slightly until it springs out.

It is recommended to format the Micro SD card before initial use and periodically thereafter to ensure optimal performance. Refer to the 'Viewing Files' section for instructions on connecting to a computer.

4.3 Mounting the Camera

The Bextgoo SQ1111U includes a 360° rotating bracket and a clip for flexible placement:

Image 4.1: Examples of mounting the Bextgoo SQ1111U Mini Camera: placed flat on a surface, attached with a clip, and wall-mounted using the rotating bracket.

• Flat Placement: Simply place the camera on any flat surface.
• Clip Attachment: Use the included clip to attach the camera to clothing, bags, or other objects.
• Wall Mounting: Secure the rotating bracket to a wall or ceiling using appropriate fasteners (not included). The camera can then be attached to the bracket, allowing for 360° rotation and 90° vertical adjustment to achieve the desired viewing angle.

5. Operating Instructions

5.1 Powering On/Off

• To Power On: Press and hold the ON/OFF button for a few seconds until the indicator light illuminates.
• To Power Off: Press and hold the ON/OFF button again until the indicator light turns off.

5.2 Mode Selection

Press the Mode button to cycle through the available operating modes. The indicator light will change color or pattern to indicate the current mode:

• 720P Standby Mode: Ready to record 720P video.
• 1080P Standby Mode: Ready to record 1080P Full HD video.
• 12M Photo Standby Mode: Ready to capture 12-megapixel photos.

5.3 Video Recording

• Standard Recording: In 720P or 1080P Standby Mode, press the ON/OFF button once to start recording. The indicator light will flash to indicate recording is in progress. Press the ON/OFF button again to stop recording and save the file.
• Motion Detection Recording: This feature conserves battery and storage by only recording when movement is detected. Activate motion detection mode (refer to the full manual for specific steps, usually involves a specific button press sequence or mode selection). When motion is detected, the camera will automatically begin recording.

5.4 Photo Capture

• In 12M Photo Standby Mode, press the ON/OFF button once to take a 12-megapixel photo. The indicator light will flash briefly to confirm the photo has been taken.

5.5 Night Vision

The camera is equipped with 6 invisible infrared lights for night vision. This feature automatically activates in low-light conditions, allowing for clear recording and photo capture in the dark without emitting visible light.

5.6 Loop Storage

When the Micro SD card becomes full, the camera's loop storage function will automatically overwrite the oldest files with new recordings. This ensures continuous operation without the need for manual storage management.

6. Viewing Files

There are two primary methods to access recorded videos and photos:

6.1 Via USB Cable

1. Ensure the camera is powered off.
2. Connect the camera to your computer using the provided USB cable.
3. The camera will be recognized as a removable disk. Open the disk to browse and transfer your files.

6.2 Via Card Reader

1. Ensure the camera is powered off.
2. Carefully remove the Micro SD card from the camera.
3. Insert the Micro SD card into the provided card reader.
4. Connect the card reader to your computer's USB port.
5. The card reader will be recognized as a removable disk. Open the disk to browse and transfer your files.

7. Maintenance

• Keep the camera dry and away from excessive moisture.
• Clean the lens with a soft, lint-free cloth to ensure clear image quality.
• Avoid dropping the camera or subjecting it to strong impacts.
• Periodically back up important files from the Micro SD card to prevent data loss.
• Format the Micro SD card regularly to maintain optimal recording performance.

8. Troubleshooting

• Camera not turning on: Ensure the battery is charged. Connect the camera to a power source and try again. If unresponsive, use a thin object to press the reset button.
• Cannot record video/take photos: Check if the Micro SD card is properly inserted and has sufficient free space. Format the card if necessary.
• Poor video/photo quality: Ensure the lens is clean and free from smudges. Verify that there is adequate lighting for the recording environment.
• Computer does not recognize the camera/card reader: Try a different USB port or cable. Ensure the camera is powered off when connecting via USB.

9. Specifications

10. Warranty and Support

Specific warranty details are not provided in this manual. For warranty information, technical support, or any inquiries regarding your Bextgoo SQ1111U Mini Security Camera, please contact the manufacturer directly through their official support channels. Keep your purchase receipt as proof of purchase.