HOMCOM IT83B-009V00GY0631

Download PDF
Contents

HOMCOM Single Sofa Bed Instruction Manual

Model: IT83B-009V00GY0631

Introduction

Thank you for choosing the HOMCOM Single Sofa Bed. This versatile furniture piece is designed to function as a comfortable armchair and easily convert into a single bed, offering a practical solution for small spaces and accommodating guests. It also includes convenient under-seat storage. Please read this manual thoroughly before assembly and use to ensure safe operation and proper maintenance.

HOMCOM Single Sofa Bed in grey, shown in a living room setting with two cushions.

Image: The HOMCOM Single Sofa Bed in its armchair configuration, featuring a grey velvet-effect fabric and two matching cushions.

Safety Instructions

  • Read all instructions carefully before assembly and use.
  • Keep all packaging materials away from children to prevent choking hazards.
  • Ensure all components are securely fastened before use. Periodically check and tighten all connections.
  • Do not exceed the maximum weight capacity of 360 kg (793 lbs).
  • Avoid standing or jumping on the sofa bed.
  • Use the product on a flat, stable surface.
  • Keep away from open flames and direct heat sources.
  • Do not allow children to play with the conversion mechanism unsupervised.

Package Contents

Verify that all parts are present before beginning assembly. If any parts are missing or damaged, please contact customer service.

  • Sofa Bed Unit (main frame)
  • 2 x Cushions
  • Assembly Hardware (if applicable, typically pre-installed or minimal)
Two cardboard boxes with HOMCOM branding, indicating the product ships in two packages.

Image: The product typically ships in two packages.

Setup and Assembly

Assembly typically requires two people and takes approximately 20 minutes. Most of the sofa bed comes pre-assembled, with minimal steps required to prepare it for use.

  1. Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, clean surface to prevent scratches.
  2. Attach Legs (if separate): If the legs are not pre-attached, screw them securely into the designated holes at the bottom of the sofa bed frame. Ensure they are tightened firmly.
  3. Position Cushions: Place the two provided cushions on the sofa bed.
  4. Final Check: Ensure the sofa bed is stable and all parts are correctly assembled before first use.
Diagram showing the dimensions of the HOMCOM Single Sofa Bed in both sofa and bed configurations.

Image: Detailed dimensions of the sofa bed in both its compact sofa and extended bed forms.

Operating Instructions

Converting from Sofa to Bed

The HOMCOM Single Sofa Bed features a simple pull-out mechanism for conversion.

  1. Remove Cushions: Take the two back cushions off the sofa.
  2. Pull Out Mechanism: Grasp the front edge of the seat and gently pull it outwards. The bed frame will extend forward.
  3. Unfold Sections: Continue to pull and unfold the sections until the bed is fully extended and flat. Ensure all support legs are properly deployed.
Three-step visual guide demonstrating how to convert the sofa into a bed.

Image: Step-by-step illustration of the sofa-to-bed conversion process.

The HOMCOM Single Sofa Bed fully extended into a bed, with a person sleeping on it.

Image: The sofa bed in its fully extended bed configuration, ready for use.

Accessing Under-Seat Storage

The sofa bed includes a convenient storage compartment located beneath the seat.

  1. Lift Seat Cushion: Carefully lift the main seat cushion upwards.
  2. Access Compartment: The storage area will be revealed underneath. You can store items such as blankets, pillows, or other small belongings.
  3. Close Securely: Lower the seat cushion back into place, ensuring it is properly seated and secure.
A person lifting the seat cushion to reveal the storage compartment underneath the sofa bed.

Image: Demonstrating how to access the integrated storage space under the seat.

Maintenance and Care

  • Cleaning: For general cleaning, wipe the velvet-effect fabric with a soft, damp cloth. For spills, blot immediately with a clean, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Cushion Covers: The cushion covers are washable. Refer to the care label for specific washing instructions.
  • Frame: Clean the metal frame with a soft, dry cloth.
  • Regular Inspection: Periodically check all bolts and screws to ensure they remain tight. Tighten as necessary to maintain stability.
  • Avoid Direct Sunlight: Prolonged exposure to direct sunlight may cause fading of the fabric.

Troubleshooting

  • Difficulty Converting: Ensure no objects are obstructing the mechanism. Check that all parts are aligned correctly. Apply gentle, even pressure when pulling or pushing.
  • Unstable Feeling: Verify that all legs are securely attached and all assembly hardware is tightened. Ensure the sofa bed is on a level surface.
  • Squeaking Noises: This may indicate loose connections. Check and tighten all bolts and screws. A small amount of silicone lubricant can be applied to moving parts if necessary, but avoid contact with fabric.

Specifications

FeatureDetail
BrandHOMCOM
Model NumberIT83B-009V00GY0631
ColorGrey
MaterialVelvet-effect fabric (Daim), Metal Frame
Sofa Dimensions (L x D x H)100 cm x 98 cm x 88 cm (39.4 in x 38.6 in x 34.6 in)
Bed Dimensions (L x D x H)80 cm x 196 cm x 41 cm (31.5 in x 77.2 in x 16.1 in)
Item Weight46.5 kg (102.5 lbs)
Weight Capacity360 kg (793 lbs)
Special FeaturesArmrest, Convertible to Bed, Cushions Included, Upholstered, Ergonomic, Removable Cover, Under-seat Storage
Care InstructionsWipe clean with a cloth
Assembly RequiredYes (approx. 2 people, 20 minutes)

Warranty and Support

For warranty information, technical support, or to inquire about replacement parts, please contact HOMCOM customer service through your retailer or the official HOMCOM website. Please have your model number (IT83B-009V00GY0631) and purchase details ready when contacting support.

© 2026 HOMCOM. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.