FreedConn KY PRO Motorcycle Intercom Headset User Manual

1. Introduction

The FreedConn KY PRO Motorcycle Intercom Headset is designed to enhance your riding experience with advanced communication features. Equipped with the latest Bluetooth 5.1 chip, it offers stable and clear communication for up to 6 riders over an impressive range of 1.2 kilometers. Its CVC noise-cancelling technology ensures crystal-clear conversations even at high speeds up to 120km/h. This versatile device supports various functions including music sharing, automatic call answering, FM radio, and universal compatibility with other intercom brands.

Key Features:

Bluetooth 5.1 & High-Quality Communication: Stable connection with CVC noise-cancelling for clear calls up to 120km/h, supporting HFP/HSP/A2DP protocols.
Multi-functional & User-Friendly: High-fidelity stereo earphones with aptX/AAC codec, 2-person music sharing, 15-second auto-answer, switchable Japanese/English voice prompts, and built-in FM radio (76-108MHz).
Long-Lasting & Fast Charging: 500mAh battery for up to 12 hours talk time, 10 hours music, 360 hours standby. Type-C fast charging (2.5 hours) allows use while charging and includes low battery notification.
IP65 Waterproof & All-Weather Ready: Durable in rain or snow, operates from -10℃ to 60℃. Lightweight (40g) for comfortable long-term helmet wear.
Japanese Market Compliant: Includes Japanese instruction manual and voice prompts. Supports simultaneous connection to two smartphones. TELEC certified for safe use in Japan.

2. Setup and Installation

Follow these steps to properly install your FreedConn KY PRO intercom on your motorcycle helmet.

Figure 1: FreedConn KY PRO intercom mounted on a motorcycle helmet, showcasing its sleek design and integrated features.

2.1. Speaker Installation

Remove the helmet's inner lining and cheek pads.
Attach the speaker Velcro pads to the designated areas inside the helmet, ensuring they are clean and dry.
Place the speakers onto the Velcro pads, aligning them with your ears for optimal sound.
Route the speaker wires discreetly under the helmet lining to avoid interference.

Diagram showing the speaker installation inside a helmet

Figure 2: Diagram illustrating the placement of speakers inside the helmet for optimal audio experience.

2.2. Microphone Installation

Choose the appropriate microphone type for your helmet (boom microphone for open-face helmets, soft-wire microphone for full-face helmets).
Attach the microphone Velcro pad to a clean, flat surface near your mouth inside the helmet.
Secure the microphone to the Velcro pad. Ensure the microphone is positioned to pick up your voice clearly without being obstructed.
Connect the microphone cable to the main unit's designated port.

Diagram showing the microphone and button layout of the intercom

Figure 3: An overview of the intercom unit, highlighting the speaker, LED indicator, power/intercom button, rotary button, multi-function button, and both hard-type and soft-type noise-cancelling microphones.

2.3. Main Unit Mounting

Select a suitable mounting method: clip-on mount (for helmets with thin edges) or adhesive mount (for helmets with thick edges or where the clip-on is not suitable).
For clip-on mount: Securely attach the clip to the helmet's edge.
For adhesive mount: Clean the helmet surface, peel off the adhesive backing, and firmly press the mount onto the helmet. Allow 4 hours for the adhesive to cure before attaching the intercom unit.
Slide the KY PRO main unit onto the installed mount until it clicks securely into place.

Video 1: Official FreedConn KY PRO installation guide, demonstrating how to attach the intercom to a helmet, including speaker and microphone placement.

3. Operating Instructions

3.1. Power On/Off & Pairing

Power On: Press and hold the Power/Intercom button and the Multi-function button simultaneously for 3 seconds until the LED indicator lights up.
Power Off: Press and hold the Power/Intercom button for 3 seconds until the LED indicator turns off.

Bluetooth Pairing: With the device off, press and hold the Power/Intercom button for 5 seconds until the LED flashes red and blue alternately. On your smartphone, search for

Related Documents - KY PRO

	KY-Pro Quick Start Guide and Operation Manual A comprehensive guide to the KY-Pro, covering quick start instructions, operation modes, pairing, and advanced features. This document provides detailed steps for using the KY-Pro helmet communication system.
	FreedConn HERO Operation Guide This guide provides instructions for operating the FreedConn HERO Bluetooth intercom headset, covering features like group conference talking, connecting to mobile phones, music sharing, and pairing with other devices.
	FreedConn HERO Intercom Headset User Guide Comprehensive user guide for the FreedConn HERO Bluetooth intercom headset, covering group talking, phone calls, music sharing, installation, and product specifications.
	FreedConn BM2-S Helmet Bluetooth Intercom Manual - Installation, Operation, and Troubleshooting Comprehensive user manual for the FreedConn BM2-S Bluetooth intercom system for helmets. Covers installation, basic operation, pairing, intercom functions, technical specifications, charging, maintenance, and troubleshooting.
	FreedConn FX Pro Bluetooth Helmet Headset User Manual User manual for the FreedConn FX Pro Bluetooth helmet headset, detailing its features, installation, operation, voice commands, pairing, music sharing, MESH mode, technical specifications, charging, maintenance, and troubleshooting.
	Freedconn T-COM VB & SC Bluetooth Motorcycle Intercom Quick Start Guide User guide for Freedconn T-COM VB and T-COM SC Bluetooth intercom systems, detailing installation, operation, pairing, music sharing, and warranty information for motorcycle riders.