Introduction
This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your Brightever Permanent Outdoor Lights. Please read this manual thoroughly before use to ensure proper functionality and safety.
Package Contents
- RGBW Permanent outdoor string with 25 lights (x1)
- Adapter with control box (x1)
- Cable clips and screw pack (x1)
- User manual (x1)
- Remote control (x1) (battery included)
Safety Information
- Ensure the power adapter is connected to a suitable power outlet.
- Do not cut the string light. This will damage the product and void any warranty.
- Keep the control box and power adapter away from excessive moisture or direct water exposure beyond the IP65 rating.
- Operate within the specified temperature range of -4°F to 140°F (-15°C to 60°C).
- Use only the provided adapter.
- The product operates on a safe 30V low voltage.
Setup and Installation
The Brightever Permanent Outdoor Lights are designed for straightforward installation. Follow these steps for optimal placement and secure attachment.
1. Planning Placement
Determine the desired location for your lights, typically along eaves or other outdoor structures. The total length of the light string is 62 feet, with 25 individual lights. Ensure the power adapter can reach a suitable outdoor power source.
Image: Product dimensions indicating 62ft total length with 25 lights.
2. Attaching the Lights
Each light is equipped with pre-assembled high-strength adhesive tape. For enhanced security and long-term stability, use the provided upgraded cable screw clips. These clips are designed to withstand pulling forces up to 15lb.
- Clean the surface where the lights will be attached to ensure optimal adhesion.
- Peel the backing from the adhesive tape on each light and firmly press it onto the desired surface.
- For permanent installation, use the provided screw clips. Manually screw the clips into place over the light string at regular intervals or wherever additional support is needed.
- The lights are compatible with various eave materials including wood, fiber, cement, metal, or vinyl.
Image: Illustration of upgraded screw clips for secure light installation.
Image: Example of lights installed along house eaves.
3. Connecting Power
Connect the light string to the adapter with the control box, then plug the adapter into a suitable outdoor power outlet. Ensure all connections are secure.
Operating Instructions
Your Brightever Permanent Outdoor Lights can be controlled via a dedicated mobile application or the included remote control.
1. Control Methods
- Mobile App: Download the compatible app (refer to packaging or quick start guide for QR code/name). The app allows for full customization, including color selection (16 million colors), brightness adjustment, scene modes, DIY modes, and timer settings.
- Remote Control: Use the included remote to power on/off, change colors, select preset scenes, and adjust brightness. The remote control operates on a nonstandard battery (included).
Image: Overview of app and remote control options for the lights.
Image: Three ways to control the lighting: app, remote, and control box.
2. Lighting Modes and Features
- 90+ Dynamic Scene Modes: Choose from a variety of pre-programmed lighting effects suitable for different occasions (e.g., holidays, parties, daily ambiance).
- Music Synchronization: The lights can pulse, flash, and glow in sync with music, creating an immersive experience.
- DIY Modes: Create and save your own custom lighting patterns and color combinations.
- Color Temperature Adjustment: Select between warm white (2700K) for cozy evenings and cool white (up to 6500K) for crisp illumination.
- Brightness Control: Adjust the light intensity to your preference. Each light provides 100 lm.
- Timer Settings: Schedule the lights to turn on or off at specific times.
Image: Lights operating in Music Mode during an outdoor gathering.
Maintenance
The Brightever Permanent Outdoor Lights are designed for durability and minimal maintenance. Regular checks can ensure optimal performance.
- Cleaning: Gently wipe the lights and cables with a soft, damp cloth to remove dirt or debris. Do not use harsh chemicals or abrasive cleaners.
- Durability: The lights feature an IP65 waterproof rating and are constructed with UV-resistant materials, allowing them to withstand rain, snow, and intense sunlight. They are tested to operate in temperatures from -4°F to 140°F (-15°C to 60°C).
- Lifespan: The LED lights have an estimated lifespan of up to 50,000 hours.
- Cable Integrity: Periodically inspect the cables and connections for any signs of wear or damage. The thickened PVC cable jackets are designed for enhanced durability.
Image: Durability features including IP65 waterproof rating and wide operating temperature range.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. | No power, loose connection, faulty adapter. |
|
| Remote control not working. | Battery depleted, remote out of range, obstruction. |
|
| App connectivity issues. | Bluetooth/Wi-Fi interference, app not updated. |
|
| Lights are not the expected length. | Misunderstanding of product length. |
|
If problems persist, please contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | SLL-DIY-RGBW6225 |
| Brand | Brightever |
| Light Source Type | LED |
| Number of Light Sources | 25 |
| Total Length | 62FT |
| Color Temperature | 2700K (Warm White) - 6500K (Cool White) |
| Lumen Output per Light | 100 lm |
| Voltage | 30 Volts (Low Voltage Adapter) |
| Power Source | Corded Electric |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Waterproof Rating | IP65 |
| Working Temperature | -4°F to 140°F (-15°C to 60°C) |
| Lifespan | Up to 50,000 hours |
| Remote Control Battery | 1 Nonstandard Battery (included) |
Warranty and Support
For warranty information or technical support, please refer to the contact details provided on the product packaging or the official Brightever website. Please have your model number (SLL-DIY-RGBW6225) and purchase date available when contacting support.
