1. Introduction
This manual provides instructions for the Tatybo WT5 Wireless Gaming Headset. It covers setup, operation, maintenance, and troubleshooting to ensure optimal performance across various platforms including PC, PlayStation 5, PlayStation 4, Nintendo Switch, Laptops, and Mobile devices.
Image: Tatybo WT5 Wireless Gaming Headset, showcasing its design with red accents and illuminated earcups.
2. Package Contents
- Tatybo WT5 Wireless Gaming Headset
- Detachable Microphone
- 2.4GHz USB-A Wireless Dongle
- USB-C Adapter (for dongle)
- USB Charging Cable (Type-C)
- User Manual
3. Product Features
- 2.4GHz Low Latency Connectivity: Provides ultra-low latency and lossless high-quality sound for gaming.
- Dual Wireless Mode: Supports both 2.4GHz and Bluetooth connectivity for versatile device compatibility.
- Extended Battery Life: Up to 40+ hours of playtime on a single 3-hour charge, with a low-battery alert feature.
- Comfort-Focused Design: Features breathable nylon mesh earcups and ultra-soft cushions for extended wear.
- 7.1 Surround Sound: 50mm drivers combined with 2.4GHz technology deliver crystal-clear audio and precise spatial awareness for an immersive experience.
- ENC Noise-Canceling Microphone: Equipped with an environmental noise-canceling (ENC) chip for clear voice transmission in noisy environments.
Image: Graphic illustrating the 7.1 Surround Sound capability of the headset, highlighting immersive audio.
Image: Close-up of the headset's earcup, detailing the skin-friendly protein leather, breathable structure, and ergonomic design for comfort.
4. Setup and Getting Started
4.1 Attaching the Microphone
Locate the microphone port on the left earcup of the headset. Insert the detachable microphone firmly into the port until it clicks into place. The microphone can be adjusted for optimal positioning or folded away when not in use.
4.2 Powering On/Off
Press and hold the Power button located on the earcup for approximately 3 seconds to turn the headset on or off. LED indicators will illuminate upon power-on.
4.3 Adjusting the Headset
The headband is adjustable to fit various head sizes. Gently slide the earcups up or down along the headband to achieve a comfortable and secure fit. The earcups are designed to provide physical isolation from external noise.
Video: Demonstrates the headset's adjustable headband, comfortable earcups, and the flexible, retractable microphone. It also shows the power button and volume controls.
5. Connectivity
Image: Illustrates the headset's compatibility with multiple platforms including PC, PS5, PS4, Switch, Laptop, and Mobile, highlighting 2.4G, Bluetooth, and Wired modes.
5.1 2.4GHz Wireless Connection
- Insert the 2.4GHz USB-A wireless dongle into an available USB port on your PC, PS5, PS4, Nintendo Switch (via dock), or Laptop. Use the provided USB-C adapter if your device only has USB-C ports.
- Power on the Tatybo WT5 headset.
- The headset will automatically connect to the dongle. A stable connection is indicated by a solid LED light on the headset.
Image: Close-up of the dual 2.4GHz USB adapter, emphasizing its stable and seamless wireless connection with low latency.
5.2 Bluetooth Connection
- Ensure the headset is powered on.
- Press and hold the Bluetooth pairing button (refer to headset controls diagram in the full manual if available) until the LED indicator flashes, indicating pairing mode.
- On your mobile device or laptop, go to Bluetooth settings and select "Tatybo WT5" to pair.
- The LED indicator will turn solid once connected.
5.3 Wired Connection (Auxiliary)
While the primary connection is wireless, the headset can also be used in a wired configuration if an auxiliary cable is provided (not explicitly listed in specifications but shown in some product visuals). Connect one end of the auxiliary cable to the headset's auxiliary port (if present) and the other end to your device's 3.5mm audio jack.
6. Operating Instructions
6.1 Volume Control
Adjust the volume using the dedicated volume roller or buttons located on the earcup. Roll up to increase volume, roll down to decrease.
6.2 Microphone Usage and Mute
The detachable microphone can be positioned closer to your mouth for clear communication. To mute the microphone, press the microphone mute button on the earcup. An indicator light (if available) will show the mute status.
Image: Illustrates the Environmental Noise-Canceling (ENC) microphone, showing sound waves being filtered for clear communication.
6.3 7.1 Surround Sound Toggle
Activate or deactivate the 7.1 Surround Sound feature by pressing the dedicated button on the headset (refer to the full manual for exact button location). This feature enhances spatial audio for an immersive gaming experience.
7. Charging and Battery
The Tatybo WT5 headset features a 1000mAh battery, providing extended usage time.
7.1 Charging the Headset
- Connect the provided USB Charging Cable (Type-C) to the charging port on the headset.
- Connect the other end of the cable to a USB power source (e.g., computer USB port, wall adapter).
- The LED indicator will show charging status (e.g., solid red for charging, off or solid blue/green for fully charged).
A full charge typically takes approximately 3 hours.
7.2 Battery Life and Alerts
The headset offers over 30 hours of battery life. A low-battery alert will notify you when charging is required.
Image: Graphic highlighting the 1000mAh battery capacity, 3-hour fast charging, and 40+ hours of battery life with a low-battery voice alert.
8. Maintenance
- Cleaning: Use a soft, dry cloth to clean the headset. For earcups, a slightly damp cloth can be used, but ensure no moisture enters the speaker grilles.
- Storage: Store the headset in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid Damage: Do not drop, disassemble, or attempt to repair the headset yourself. Avoid exposing it to water or excessive force.
9. Troubleshooting
9.1 No Power
- Ensure the headset is fully charged.
- Press and hold the Power button for 3 seconds to confirm it's being turned on correctly.
9.2 No Sound / Low Sound
- Check the volume level on both the headset and your connected device.
- For 2.4GHz connection, ensure the USB dongle is properly inserted and recognized by your device.
- For Bluetooth, ensure the headset is paired and connected to your device.
- Verify that the correct audio output device is selected in your device's sound settings.
9.3 Microphone Not Working
- Ensure the microphone is securely attached to the headset.
- Check if the microphone is muted using the mute button on the headset.
- Verify microphone input settings on your connected device.
9.4 Connection Issues
- Move closer to your device to ensure you are within the wireless range.
- Restart both the headset and your connected device.
- For Bluetooth, try unpairing and re-pairing the headset.
Video: Provides an overview of the headset's features, including its comfortable design, adjustable microphone, and connectivity options, which may assist in troubleshooting.
10. Specifications
| Feature | Specification |
|---|---|
| Model Name | WT5 |
| Connectivity Technology | Wireless (2.4GHz, Bluetooth) |
| Wireless Communication Technology | 2.4GHz, Bluetooth 5.0 |
| Compatible Devices | PC, PS5, PS4, Nintendo Switch, Mobile, Laptop |
| Battery Life | 30 Hours (up to 40+ hours) |
| Charging Time | 3 Hours |
| Audio Driver Type | Dynamic Driver (50mm) |
| Special Features | 7.1 Surround Sound, Low Latency, Noise Cancellation (ENC Microphone), Long Battery Life |
| Material | Metal, Plastic, Fabric |
| Item Weight | 0.56 Kilograms (1.23 pounds) |
11. Warranty and Support
For warranty information and technical support, please refer to the official Tatybo website or contact their customer service. Keep your purchase receipt for warranty claims.
