1. Introduction
Welcome to the instruction manual for your smartwood Tila 6 Children's Bed. This manual provides essential information for safe assembly, operation, and maintenance of your new bed. Please read it thoroughly before assembly and retain it for future reference.
Important Safety Information
Assemble the bed in accordance with the enclosed instructions. Do not exceed the recommended maximum load for the bed. The maximum recommended load for the bed frame with flexible slats is 230 kg.
This bed is designed for children aged 2 years and older.
Ensure all fasteners are securely tightened before use. Regularly check and re-tighten fasteners as needed.
Keep small parts away from children during assembly to prevent choking hazards.
The bed is made from FSC-certified pine wood and painted with child-safe, water-based paint (Tikkurila Aktiv Top).
Image 1.1: The smartwood Tila 6 Children's Bed, showcasing its design and low profile.
2. Package Contents
Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Bed frame components (side rails, headboard, footboard)
- Flexible slatted base with plastic tips
- Safety barrier
- Assembly hardware kit (screws, dowels, etc.)
- Detailed assembly instructions
Image 2.1: This diagram illustrates the various parts included in your smartwood Tila 6 Children's Bed package, along with key dimensions and load capacity.
3. Setup (Assembly Instructions)
The smartwood Tila 6 bed is designed for easy assembly. Follow these steps carefully. It is recommended to have two adults for assembly.
- Unpack all components and lay them out on a clean, soft surface to prevent scratches.
- Identify the side panels, headboard, and footboard.
- Attach the side panels to the headboard and footboard using the provided hardware. Ensure all connections are secure.
- Insert the flexible slatted base into the designated slots or supports within the bed frame. The plastic tips on the slats prevent squeaking.
- Install the safety barrier on the designated side of the bed. This barrier is mounted on half the frame, allowing the child freedom to enter and exit.
- Tighten all screws and fasteners firmly, but do not overtighten.
- Once assembled, gently shake the bed to ensure stability.
Refer to the detailed assembly diagram included in your package for visual guidance.
Image 3.1: This image highlights the fast assembly feature of the smartwood Tila 6 bed, indicating a straightforward setup process.
4. Operating Instructions
The smartwood Tila 6 is a Montessori-style floor bed designed to provide a safe and accessible sleeping environment for children.
- Mattress Placement: Place a mattress of size 70 x 140 cm directly onto the flexible slatted base. The base promotes good ventilation for the mattress.
- Safety Barrier: The integrated safety barrier provides protection while allowing the child to independently get in and out of bed.
- Weight Limit: Do not exceed the maximum weight limit of 230 kg for the bed.
- Supervision: Always supervise young children, especially when they are first using the bed.
Image 4.1: This image emphasizes the safety barrier feature of the smartwood Tila 6 bed, designed to keep children secure.
5. Care and Maintenance
Proper care will ensure the longevity and appearance of your smartwood Tila 6 bed.
- Cleaning: Wipe the bed frame with a dry cloth. For stubborn marks, a slightly damp cloth can be used, followed by immediate drying. Avoid abrasive cleaners or harsh chemicals.
- FSC-Certified Wood: The bed is made from FSC-certified pine wood. Protect it from excessive moisture and direct sunlight to prevent warping or fading.
- Fastener Check: Periodically check all screws and fasteners to ensure they remain tight. Re-tighten if necessary.
- Paint Finish: The water-based paint is child-safe and dirt-resistant. Minor scratches can sometimes be touched up with a similar water-based paint if needed.
Image 5.1: This image details the finishing process of the smartwood Tila 6 bed, including rounded edges, high-quality plywood, and water-based paint layers.
6. Troubleshooting
- Squeaking Noise: The slatted base is equipped with plastic tips to prevent squeaking. If squeaking occurs, check that all slats are properly seated and that all frame fasteners are tight.
- Instability: If the bed feels unstable, re-check all assembly connections and ensure all screws are fully tightened.
- Damaged Parts: If any part is damaged or missing, contact smartwood customer support for assistance. Do not attempt to use the bed with damaged components.
7. Product Specifications
| Feature | Detail |
|---|---|
| Model | TILA 6 |
| Brand | smartwood |
| Dimensions (L x W x H) | 143 cm x 73 cm x 40 cm (approx. 56.3"L x 28.74"W x 15.75"H) |
| Mattress Size Compatibility | 70 x 140 cm |
| Material | FSC-Certified Pine Wood |
| Finish | Water-based paint (Tikkurila Aktiv Top) |
| Color | Blue |
| Maximum Weight Limit | 230 kg |
| Recommended Age | 2 years and older |
| Assembly Required | Yes |
| Item Weight | 20 kg (approx. 44 pounds) |
Image 7.1: This image highlights key features of the smartwood Tila 6 bed, including its low entrance, Montessori approach, and eco-friendly paint.
8. Warranty and Customer Support
Your smartwood Tila 6 Children's Bed comes with a 2-year warranty. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase.
For technical assistance, missing parts, or warranty claims, please contact smartwood customer support:
Manufacturer: SMARTWOOD SP. z o.o.
Address: Łazy 103a, 37-550 Radymno, Poland
Email: biuro@smartwood.pl
Image 8.1: This image displays the official contact details for smartwood, including the manufacturer's name, address, and email for customer inquiries.
