1. Introduction
This manual provides comprehensive instructions for the ALVAR MAN62430001 Refrigerator Door Bin Shelf. This product is designed as a replacement part for various LG and Kenmore refrigerator models, specifically for the right lower door bin. It is constructed from durable, food-grade material to ensure longevity and reliable support for stored items.
Image 1: ALVAR MAN62430001 Refrigerator Door Bin Shelf, a clear plastic bin designed for refrigerator doors.
2. Product Specifications
- Part Number: MAN62430001 Refrigerator Door Shelf Bin
- Manufacturer: ALVAR
- Item Weight: 6.4 ounces
- Product Dimensions: 6 x 4 x 2 inches (Note: Actual bin dimensions are approximately 12.68" x 1.81" x 2.13" as shown in image 2)
- Included Components: 1x MAN62430001 Refrigerator Door Shelf Bin
- Material: Food-grade, durable plastic with reinforced edges and bottom corners.
Image 2: Diagram illustrating the dimensions of the MAN62430001 door bin, showing approximate measurements of 12.83 inches in length, 1.77 inches in height, and 12.59 inches in depth at the base.
3. Compatibility
The MAN62430001 door bin is compatible with a wide range of LG and Kenmore refrigerator models. It is designed for the right lower door bin position in bottom-mount refrigerators. Please verify your refrigerator's model number and the dimensions of your existing bin before ordering to ensure proper fit.
Compatible LG Refrigerator Models:
- LFX25992ST, LFX29945ST, LFX31945ST, LFX32945ST
- LFXC24796D, LFXC24796S, LFXS25973D, LFXS29766S
- LFXS30766D, LFXS30766S, LFXS30786S, LFXS30796D, LFXS30796S, LFXS32766S
- LMX30995ST, LRFDC2406D, LRFDC2406S, LRFDS3006D, LRFDS3006S, LRFDS3016D, LRFDS3016S
- LRFVC2406D, LRFVC2406S, LRFVS3006D, LRFVS3006S, LSFD2491ST
- LSFXC2476D, LSFXC2476S, LSFXC2496D, LSFXC2496S, SKSFD3613S
Compatible Kenmore Refrigerator Models:
- 79572062110, 79572062112, 79572062312, 79572062313, 79572062315, 79572062316
- 79572063110, 79572063111, 79572063112, 79572063113, 79572063315, 79572063317, 79572069110
Image 3: A visual representation of the extensive list of LG and Kenmore refrigerator models compatible with the MAN62430001 door bin.
4. Setup and Installation
Installing the ALVAR MAN62430001 Refrigerator Door Bin Shelf is a straightforward process that does not require special tools. Follow these steps for a secure fit:
- Identify the Correct Slot: Locate the designated slot on the right lower section of your refrigerator door where the bin is to be installed. Refer to your refrigerator's model label, typically found on the side panel, to confirm the correct part number and location.
- Align the Bin: Hold the MAN62430001 door bin, ensuring the reinforced mounting hooks are aligned with the slots in the refrigerator door.
- Slide into Place: Gently slide the door bin downwards into the designated slot until it clicks securely into position. Ensure it is firmly seated and does not wobble.
Image 4: Visual guide demonstrating the installation process, including checking the refrigerator's model label and sliding the door bin into its designated slot.
Image 5: The MAN62430001 door bin shown correctly installed in the lower right section of a refrigerator door, ready for use.
5. Maintenance
To ensure the longevity and hygiene of your ALVAR MAN62430001 Refrigerator Door Bin Shelf, regular cleaning and proper care are recommended:
- Cleaning: Remove the door bin from the refrigerator. Wash with mild soap and warm water. Avoid abrasive cleaners or harsh chemicals, as these can damage the plastic. Rinse thoroughly and dry completely before re-installing.
- Load Capacity: While the bin is designed for excellent load-bearing capacity, avoid overloading it with excessively heavy items to prevent stress on the plastic and mounting points.
- Temperature: Do not expose the bin to extreme heat, such as from a dishwasher's drying cycle, as this may cause warping or damage. Hand washing is recommended.
6. Troubleshooting
If you encounter any issues with your MAN62430001 Refrigerator Door Bin Shelf, consider the following common problems and solutions:
- Unstable Installation or Falling Bin: Ensure the bin is correctly aligned and fully seated in the designated slots. The reinforced mounting hooks should engage properly. If the issue persists, inspect the refrigerator door slots for any damage or obstruction.
- Poor Quality or Cracking: The ALVAR MAN62430001 is made from durable material. If you observe cracking or poor quality upon receipt, it may indicate a manufacturing defect or shipping damage. Refer to the warranty section for resolution.
- Incorrect Size / Cannot Be Installed: This is often due to ordering the wrong part number for your specific refrigerator model. Double-check your refrigerator's model number and compare it with the compatibility list provided in Section 3 and Image 3. Also, verify the dimensions of your old bin against the product specifications in Section 2 and Image 2.
Image 6: A graphic outlining common symptoms and issues related to refrigerator door bins, such as instability, poor quality, and size incompatibility.
7. Warranty and Support
The ALVAR MAN62430001 Refrigerator Door Bin Shelf comes with a 365-day warranty. This warranty covers manufacturing defects and issues related to product quality under normal use.
For any product-related inquiries, concerns, or warranty claims, please contact ALVAR customer support. We are committed to providing assistance and resolving any issues you may encounter.
- Return Policy: 30-day refund/replacement policy.
- Customer Support: Please refer to your purchase platform for direct contact methods or visit the ALVAR brand store for more information.
