Important Safety Information
Please read all instructions carefully before assembling and using your recliner. Retain this manual for future reference.
- Weight Capacity: Do not exceed the maximum weight capacity of 350 lbs (158 kg). Exceeding this limit may cause damage to the chair or personal injury.
- Power Cord: Ensure the power cord is not pinched, tangled, or placed under the chair where it could be damaged. Keep the cord away from heat sources and sharp edges.
- Children and Pets: Keep children and pets away from the recliner's moving parts, especially during operation. Do not allow them to play on or under the chair.
- Clearance: Ensure adequate clearance around the recliner when operating the recline function to prevent obstruction or injury.
- Stability: Always sit properly in the chair. Avoid standing on the footrest or armrests.
- Power Disconnection: Unplug the recliner from the power outlet before cleaning or performing any maintenance.
Package Contents
Your HOMYEDAMIC Power Recliner is shipped in two separate boxes. Please ensure both boxes have arrived and all components are present before beginning assembly.
- Backrest
- Seat Base with Armrests
- Power Adapter
- Remote Control
- Lumbar Support Cushion

Setup and Assembly
Assembly of your recliner is designed to be quick and straightforward, typically taking approximately 15 minutes without the need for additional tools.
Step 1: Unpacking
- Carefully remove all components from both shipping boxes.
- Place the seat base on a flat, stable surface where you intend to use the recliner.
Step 2: Attaching the Backrest
- Align the metal brackets on the backrest with the corresponding slots on the seat base.
- Slide the backrest firmly down until it locks securely into place. You should hear a click.
Step 3: Connecting Power
- Locate the power cable extending from the recliner's base and the power adapter.
- Connect the recliner's power cable to the power adapter.
- Plug the power adapter into a standard electrical outlet.
Your recliner is now assembled and ready for use.
Operating Instructions
Power Recline Function
The recliner features a smooth power recline mechanism controlled by a wired remote control, allowing you to adjust your position effortlessly.
- To Recline: Use the remote control to extend the footrest and recline the backrest. The chair can adjust between approximately 90° (upright) and 145° (fully reclined).
- To Return to Upright: Use the remote control to retract the footrest and bring the backrest to its original position.


Lumbar Support Cushion
The recliner includes a dedicated lumbar support cushion designed to provide additional comfort and support for your lower back.
Hidable Cup Holders
Conveniently located in the armrests, two cup holders can be extended for use and retracted when not needed, maintaining the chair's sleek appearance.

Storage Pockets
The side of the recliner features practical storage pockets, ideal for keeping your remote control, magazines, or other small items within easy reach.

Maintenance
Care and Cleaning
- Fabric Care: The chenille fabric is soft and skin-friendly. For general cleaning, wipe with a clean, damp cloth. Avoid using harsh chemical cleaners, abrasives, or solvents, as these may damage the fabric.
- Frame: The recliner features an all-metal body, BIFMA certified for durability. No special maintenance is required for the frame under normal use.
- Cushion: The spring-loaded cushion is designed to maintain flexibility and resist collapsing over extended use. Fluff cushions periodically to maintain shape.
General Care Tips
- Regularly inspect all connections and fasteners to ensure they remain secure. Tighten if necessary.
- Avoid exposing the recliner to direct sunlight for prolonged periods, as this can cause fabric fading.
- Keep the recliner away from extreme temperatures or high humidity.
- Do not place hot items directly on the fabric.
Troubleshooting
If you encounter any issues with your HOMYEDAMIC Power Recliner, please refer to the following table for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Recliner does not move when remote is pressed. | Power cord unplugged or loose connection. No power to the outlet. | Check that the power cord is securely plugged into both the recliner and a working electrical outlet. Test the outlet with another device. |
| Unusual noises (squeaking, grinding) during operation. | Loose fasteners in the mechanism. Obstruction in the moving parts. | Inspect the underside of the recliner for any loose bolts or screws and tighten them. Check for any objects obstructing the reclining mechanism. |
| Footrest does not fully extend or retract. | Obstruction preventing full movement. Mechanism issue. | Ensure there are no objects (rugs, furniture) blocking the footrest's path. If the issue persists, contact customer support. |
Product Specifications
- Brand: HOMYEDAMIC
- Model: ZX-ET6001-1
- Color: Grey-6001
- Product Dimensions (Upright): 35"D x 50"W x 43"H
- Seat Width: 28 inches
- Weight Capacity: 350 lbs
- Material: Chenille Fabric, Cotton, Foam
- Frame: All-metal, BIFMA certified
- Recline Angle: Approximately 90° to 145°
- Item Weight: 110 pounds
- Care Instructions: Wipe Clean

Warranty and Support
For specific warranty details regarding your HOMYEDAMIC Power Recliner, please refer to the documentation provided at the time of purchase or contact your retailer.
Customer Support
Should you require further assistance, have questions about assembly, operation, or encounter any issues not covered in this manual, please contact HOMYEDAMIC customer service.
You can find more information and contact options by visiting the official HOMYEDAMIC store on Amazon: HOMYEDAMIC Store




