LOOP GEAR SK05 PRO Flashlight User Manual

Introduction

This manual provides detailed instructions for the safe and efficient use of your LOOP GEAR SK05 PRO EDC Flashlight. Please read this manual thoroughly before operating the device and retain it for future reference.

Safety Information

• WARNING: Do not use other branded batteries or you may risk causing serious consequences.
• CAUTION: Be aware of the heat on the head during prolonged use at high brightness settings.
• Do not shine the flashlight directly into eyes. Keep out of reach of children.
• Ensure the Type-C charging port cover is securely closed to maintain IP68 waterproof rating.
• Avoid disassembling the flashlight, as this may void the warranty and cause damage.

Product Overview

The LOOP GEAR SK05 PRO is a versatile EDC (Everyday Carry) flashlight featuring high lumen output, multiple lighting modes, and an integrated power bank function. It is designed for durability and convenience in various situations.

Figure 1: LOOP GEAR SK05 PRO Mao Flashlight (light grey version). This image shows the overall design of the flashlight, highlighting its compact form factor and the side RGB light strip.

Figure 2: LOOP GEAR SK05 PRO Flashlight (dark grey version). This image presents the flashlight in a darker finish, showcasing the same robust design and side light feature.

Figure 3: Key features of the SK05 PRO Mao, including max output of 4360lm, furthest range of 405m, and max capacity of 8000mAh.

Figure 4: Illustration of the dual 4000mAh 18650 batteries inside the SK05 PRO, providing a total of 8000mAh capacity for extended runtime.

Setup

1. Battery Installation (SK05 PRO Mao)

1. Locate the battery compartment release mechanism, typically on the side or rear of the flashlight.
2. Press the release button to open the battery compartment.
3. Insert two 18650 batteries (4000mAh each, totaling 8000mAh) according to the polarity indicators (+/-).
4. Close the battery compartment securely until it clicks into place.

2. Initial Charging

• Connect the provided Type-C fast charging cable (20W) to the flashlight's charging port.
• Connect the other end of the cable to a compatible USB power adapter.
• The side indicator lights will show charging progress. A full charge typically takes 3-5 hours.
• Ensure the charging port cover is sealed after charging to maintain water resistance.

Figure 5: The SK05 PRO Mao flashlight being used to charge a smartphone via its 20W PD fast charging capability, demonstrating its power bank function.

Figure 6: The dark grey version of the SK05 PRO flashlight charging a smartphone, illustrating its utility as an 8000mAh power bank.

Operating Instructions

1. Main Light Operation (Spotlight & Floodlight)

• The flashlight features a rotary dial on the side to select different light modes.
• Rotate the dial to switch between:
  • Spotlight: For long-distance illumination (SFT25 Spot LED, up to 1300 lumens, 405 meters).
  • Floodlight: For wide-area illumination (three SST25 Flood LEDs, up to 3060 lumens).
  • Combined: Activates both spotlight and floodlight for maximum brightness (up to 4360 lumens).
• The dial also includes a lock position to prevent accidental activation.

Figure 7: Demonstration of the SK05 PRO Mao's powerful beam, reaching up to 405 meters with 4360 lumens, suitable for outdoor and long-range visibility.

Figure 8: The dark grey SK05 PRO flashlight illuminating a wide area, showcasing its 405-meter beam distance and 4360 lumens output.

2. Sidelight Operation (8-Color RGB)

• The integrated 8-color RGB sidelights offer various ambient and warning modes.
• Refer to the product's quick start guide or packaging for specific instructions on how to cycle through the RGB modes (e.g., night light, warning, party modes).

3. Power Bank Function

• To use the flashlight as a power bank, connect your external device (e.g., smartphone) to the Type-C port using a compatible cable.
• The flashlight will automatically begin charging the device. It supports 20W PD fast charging.

4. Safety Lock Feature

• The flashlight is equipped with a safety lock function to prevent accidental activation, especially when carried in a pocket or bag.
• Refer to the product's quick start guide or packaging for specific instructions on how to engage and disengage the safety lock.

Maintenance

• Cleaning: Wipe the flashlight with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Battery Care: For optimal battery life, fully charge the flashlight before long periods of storage. If storing for extended periods, charge every 3-6 months.
• Water Resistance: Ensure all port covers and battery compartments are securely closed to maintain the IP68 waterproof and dustproof rating.
• Drop Protection: While designed to be 1-meter drop-proof, avoid unnecessary drops to prevent potential damage.

Troubleshooting

• Flashlight not turning on:
  • Check if the battery is charged.
  • Ensure batteries are inserted with correct polarity.
  • Verify the safety lock is disengaged.
• Charging not working:
  • Ensure the charging cable is properly connected to both the flashlight and the power source.
  • Try a different Type-C cable or power adapter.
• Reduced brightness or runtime:
  • Battery may be low; recharge the flashlight.
  • Batteries may be nearing the end of their lifespan and require replacement.

Specifications

Product Videos

Warranty & Support

For warranty information and customer support, please refer to the official LOOP GEAR website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.