RAINLEOTI D7-P2YI-LFSC CCTV Camera Tester User Manual

1. Introduction

The RAINLEOTI D7-P2YI-LFSC is a 7-inch IPS touch screen CCTV Camera Tester designed for comprehensive testing and maintenance of IP and CVBS analog camera systems. It supports up to 6K 12MP IP POE camera testing, offering features such as IP discovery, fast recording, RTSP playback, and automatic video viewing. The device also includes powerful network tools for detecting and setting various network parameters, UTP network cable testing, POE testing, and RJ45 TDR network cable testing. Its portable design and high-precision capabilities ensure efficient and convenient operation for security professionals.

Figure 1.1: RAINLEOTI D7-P2YI-LFSC CCTV Camera Tester Overview

2. Package Contents

Verify that all items listed below are included in your package. If any items are missing or damaged, please contact customer support.

• 1 x 722 CCTV Camera Tester
• 1 x Tool Bag
• 1 x BNC Video Cable
• 1 x Charger
• 1 x Safety Cord
• 1 x RS485 Control Cable
• 1 x Power Output Converter
• 1 x User Manual
• 1 x Remote

Figure 2.1: Package Listing

3. Product Overview

3.1 Ports and Indicators

The device features various ports and indicators for connectivity and power management.

Figure 3.1: Ports and Indicators

• RS485 Serial Port: For PTZ control and data analysis.
• DC 24V/1A Power Output Port: Provides 24V/1A power output.
• LAN Port/IPC Connection Port/POE Output Port: Ethernet port for IP camera connection and POE output.
• PSE Test Port: For testing Power Sourcing Equipment (POE).
• DC 12V/3A Power Output: Provides 12V/3A power output.
• CVBS Input Port: For connecting CVBS analog cameras.
• LED Lamp: Integrated light source.
• Red Light: Power ON indicator.
• Green Light: Charging indicator.
• MicroSD Slot: For expandable storage.
• HDMI Output Port: For connecting to an external display.
• Audio Out Port: For audio output.
• Charging Port DC12V/2A: Power input for charging the device.
• USB 5V/2A Input/Output Port: For USB power and data transfer.
• UTP Cable Tracking Port: For network cable tracing.
• TDR Breakpoint Test Port: For TDR network cable testing.

3.2 Control Buttons

The device features a set of control buttons for navigation and function execution.

Figure 3.2: Control Buttons

• FAR+/PTZ Focus+Operation: Adjusts focus farther or increases PTZ focus.
• NEAR-/PTZ Focus-Operation: Adjusts focus nearer or decreases PTZ focus.
• TELE+/PTZ Zoom+Operation: Zooms in or increases PTZ zoom.
• WIDE-/PTZ Zoom-Operation: Zooms out or decreases PTZ zoom.
• APER+/Gimbal Aperture+Operation: Increases aperture or gimbal aperture.
• APER-/PTZ Aperture-Operation: Decreases aperture or PTZ aperture.
• Directional Buttons (Up/Down/Left/Right): Select cursor or navigate menu.
• ENTER Button: Confirms selections.
• CLOSE Button: Exits current function or menu.
• Power Button: Turns the device on or off.

4. Setup

4.1 Initial Charging

Before first use, fully charge the device. Connect the included charger to the DC12V/2A Charging Port. The green LED indicator will illuminate during charging and turn off when fully charged. The built-in 7.4V/7000mAh battery provides approximately 8-10 hours of continuous operation.

4.2 Powering On/Off

Press and hold the Power Button until the screen illuminates to turn on the device. To power off, press and hold the Power Button again and follow the on-screen prompts.

4.3 Power Management

The tester offers multiple power output options for external devices:

• POE48V Output: For powering POE cameras.
• DC 24V/1A Output: For devices requiring 24V power.
• DC 12V/3A Output: For devices requiring 12V power.
• USB 5V/2A Output: For charging mobile devices or powering USB accessories.

Figure 4.1: Power Management Ports

5. Operating Instructions

5.1 IP Camera Testing

The tester supports IP camera testing up to 6K 12MP resolution. Connect the IP camera to the LAN/POE port on the tester. The device can automatically detect IP cameras, record footage, and play back RTSP streams.

• IP Discovery: Automatically scans and lists IP cameras on the network.
• Fast Recording & RTSP Playback: Capture and review video streams directly on the device.
• IPC Testing: Access various camera settings and functionalities.
• Automatic Video Viewing: Simplifies camera setup and verification.
• Test Report Generation: Create reports for documentation.

Figure 5.1: IP Camera Test Interface

5.2 Rapid ONVIF & ONVIF-XVR

The tester supports Rapid ONVIF for quick camera discovery and ONVIF-XVR for managing multiple cameras.

• Rapid ONVIF: When connected to the network, the tester automatically scans ONVIF cameras in the LAN, completing the scan within 1-2 seconds. For cameras requiring authentication, enter username and password to view images. Supports 4K H.265, H.264, MPEG4 images, video recording, playback, full screen display, and image zoom.
• ONVIF-XVR: If all cameras are on the same Ethernet and use the same username and password, the tester can display up to 32 camera videos simultaneously. Supports camera device information viewing, maintenance/time, IP settings, video settings, stream selection, adding ONVIF camera IP address, refreshing ONVIF camera list, advanced settings, channel name modification, and other operations.

Figure 5.2: Rapid ONVIF & ONVIF-XVR Interfaces

5.3 CVBS Analog Camera Testing

The 7-inch high-definition full-view CCTV camera tester supports CVBS analog camera testing, UTC PTZ control, and OSD menu access. The video page can be enlarged 1-8 times for detailed inspection.

Important Note:

• The "IP+CVBS CAMERA TESTER" is designed solely for CVBS analog camera functionality and does not support AHD/TVI/CVI coaxial HD capabilities.
• The CVBS function should only be used with standard analog cameras. High-definition coaxial cameras (labeled AHD, CVI, or TVI) are not compatible.
• To use the CVBS function, connect the analog camera to the tester's IN port using the included BNC video cable. Power the camera using the provided Power Output Converter connected to the DC12V/3A OUT port. Then, open the "CVBS" application on the tester.

Figure 5.3: CVBS Analog Camera Connection

5.4 Network Tools

The tester includes a suite of network tools for diagnostics and configuration.

Figure 5.4: Network Tools Interface

• IP Detection: Scans the network for active IP addresses.
• PING Test: Verifies network connectivity to a specific IP address.
• Network Port Flashing: Helps identify network cables by flashing the port LED.
• One-Click Video: Quickly access video streams.
• POE Test: Checks Power over Ethernet functionality and voltage.
• UTP Cable Test: Tests the continuity and connection status of UTP network cables.
• RJ45 TDR Network Cable Test: Measures network cable length (1-195 meters), attenuation, quality, reflectivity, impedance, and skew with an accuracy error range of ±1.2%.
• PSE Voltage Test: Displays POE power supply voltage and circuit condition.

Figure 5.5: Cable Continuity Test

Figure 5.6: Network Cable TDR Test

Figure 5.7: PSE Voltage Test

5.5 PTZ Control

The tester supports Pelco-D/P, Samsung, Panasonic, and over 30 other manufacturer protocols for PTZ control via RS485. It also supports UTC PTZ control for compatible CVBS cameras.

Figure 5.8: RS485 Serial Port Tools

5.6 HDMI Output

The device includes an HDMI output interface, allowing you to display the tester's screen on an external monitor. This feature supports color bar output and can be used with a computer to operate the IPC tester.

Figure 5.9: HDMI Output Connection

6. Maintenance

6.1 Software Updates

The device features an 'Upgrade Center' for application management. Here, you can install or uninstall applications. It supports connecting to a remote server for online installation or installing locally from files.

Figure 6.1: Upgrade Center

6.2 Battery Care

To prolong battery life, avoid exposing the device to extreme temperatures (hot or cold). Charge the device regularly and avoid complete discharge for extended periods.

6.3 Cleaning

Use a soft, dry cloth to clean the device's screen and body. Avoid using abrasive cleaners or solvents that could damage the surface.

7. Troubleshooting

• Issue: Device does not power on.
  Solution: Ensure the device is fully charged. Connect the charger and check if the green charging indicator light is on. If not, verify the charger connection and power source.
• Issue: Cannot detect IP cameras.
  Solution: Verify that the IP camera is properly connected to the LAN/POE port. Ensure the camera is powered on. Check network settings on the tester and the camera to ensure they are on the same subnet or configured correctly. Perform an IP Discovery scan.
• Issue: CVBS analog camera not displaying video.
  Solution: Confirm that the camera is a standard CVBS analog camera. This tester does not support AHD/TVI/CVI coaxial HD cameras. Ensure the BNC video cable is securely connected to the CVBS Input Port and the camera. Verify the camera is receiving power from the DC12V/3A OUT port via the Power Output Converter. Open the "CVBS" application on the tester.
• Issue: Battery life is shorter than expected.
  Solution: Ensure the device is charged in a moderate temperature environment. Avoid frequent deep discharges. If the issue persists, the battery may require service.
• Issue: Network cable TDR test results are inaccurate.
  Solution: Ensure the cable length is within the 1-195 meter measurement range. Verify that the cable is properly terminated and free from damage.

8. Technical Specifications

Figure 8.1: Parameter Table

9. Warranty and Support

9.1 Product Warranty

This product is guaranteed for free within one year from the date of purchase against quality problems under normal use, excluding manual damage.

9.2 Customer Support

RAINLEOTI is committed to providing comprehensive and responsible testing solutions. If you have any usage or technical questions about this product, please contact us. We value your inquiries and aim to respond within 24 hours to ensure your problem is resolved.