Introduction
Thank you for choosing the VIVOSUN 70oz Pump Sprayer. This manual provides essential information for the safe and efficient operation, maintenance, and care of your sprayer. Please read these instructions thoroughly before first use and retain them for future reference.
Safety Information
- Always keep the sprayer upright when not in use.
- Do not over-pressurize the sprayer. The pressure release valve automatically vents excess air.
- After use, clean and dry the sprayer thoroughly before storing.
- Do not dispose of the sprayer in regular trash. Follow local regulations for disposal of chemical containers.
- Keep the sprayer out of reach of children and pets.
- Always follow safety guidelines for any liquids or chemicals used with the sprayer.
Product Overview
Familiarize yourself with the components of your VIVOSUN 70oz Pump Sprayer:
- Adjustable Nozzle: Controls spray pattern from fine mist to strong stream.
- Filling Port with Measuring Cup: Side port for easy and accurate liquid refills without removing the main lid.
- Thickened Base: Provides stability and durability.
- Safety Valve: Automatically releases excess pressure for safe operation.
- Spray Switch: Activates the spray. Can be locked for continuous spraying.
- Ergonomic Handle: Designed for comfortable grip and reduced hand fatigue.
- Transparent Tank: Allows for easy monitoring of liquid levels.
Setup
1. Filling the Sprayer
The transparent tank and side filling port simplify the filling process:
- Ensure the sprayer is depressurized by pulling the safety valve.
- Unscrew the side filling port cap.
- Use the included measuring cup to accurately add your desired liquid to the tank. The transparent tank allows you to monitor the liquid level easily. Do not overfill past the maximum fill line.
- Securely close the side filling port cap.
Operating Instructions
1. Building Pressure
- Ensure the main pump handle is fully seated and twisted securely.
- Pump the handle up and down repeatedly to build pressure inside the tank. You will feel resistance as pressure builds.
- Stop pumping when sufficient pressure is achieved, or if the safety valve activates.
2. Adjusting the Nozzle
The adjustable nozzle allows you to customize the spray pattern for various applications:
- Rotate the nozzle clockwise for a finer mist, suitable for delicate plants or broad coverage.
- Rotate the nozzle counter-clockwise for a stronger, more concentrated stream, ideal for targeted spraying or cleaning.
3. Spraying
- Aim the nozzle at the target area.
- Press the spray switch on the ergonomic handle to begin spraying.
- For continuous spraying, push the spray switch forward until it locks into place. To stop, pull the switch back.
- If the spray weakens, pump the handle again to re-pressurize the tank.
4. Versatile Applications
This sprayer is suitable for a variety of tasks:
- Watering and fertilizing plants.
- Applying herbicides or pesticides.
- Cleaning around the home or garden.
- Washing vehicles.
Maintenance
1. Cleaning After Use
- Empty any remaining liquid from the tank.
- Rinse the tank thoroughly with clean water.
- Pump clean water through the nozzle to flush out any residue.
- Disassemble the nozzle and clean any blockages if necessary.
- Dry all components before storage.
2. Checking Seals
The sprayer features durable fluororubber gaskets for leak resistance. Periodically inspect these seals for wear or damage. Replace if necessary to maintain optimal performance and prevent leaks.
3. Storage
Store the sprayer in a cool, dry place, away from direct sunlight and freezing temperatures. Ensure the tank is empty and clean before storage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No spray or weak spray | Insufficient pressure; clogged nozzle; low liquid level. | Pump handle to build pressure; clean nozzle; refill tank. |
| Leaking from nozzle or connections | Loose connections; worn seals. | Tighten connections; inspect and replace seals if damaged. |
| Difficulty pumping | Pump mechanism obstruction; dry seals. | Check for debris; lubricate pump seals with silicone grease. |
Specifications
- Brand: VIVOSUN
- Model Name: VSG-SPRAY-PP2L
- Tank Volume: 70 fluid ounces (approx. 2 Liters)
- Material: Plastic, Rubber
- Color: Black
- Item Weight: 0.74 kg (1.63 lbs)
- Item Dimensions (W x H): 6.13"W x 9.25"H
- Maximum Pressure: 36 psi
- Power Source: Manual
- Included Components: Measuring Cap, Aluminum Extension Rod (7.87 inches)
Official Product Video
Watch the official VIVOSUN product video for a visual guide on using your pump sprayer:
Video 1: Official VIVOSUN Pump Sprayer demonstration, showcasing features and usage.
Warranty and Support
VIVOSUN products are manufactured to high-quality standards. For warranty information, product support, or to purchase replacement parts, please visit the official VIVOSUN website or contact their customer service directly. Keep your purchase receipt as proof of purchase.
VIVOSUN Official Store: Visit VIVOSUN Store on Amazon