1. Introduction
This manual provides essential information for the proper use, care, and maintenance of your HyFlex Ansell 11-840 Ergonomic Abrasion-Resistant Nylon Spandex Nitrile Coated Industrial Gloves. Please read these instructions carefully before using the product to ensure optimal performance and safety.
Image 1.1: Front and back view of the HyFlex Ansell 11-840 industrial gloves, showcasing the grey knitted material and black nitrile coating on the palm and fingers.
2. Key Features
The HyFlex Ansell 11-840 gloves are designed with advanced technologies to provide enhanced protection, comfort, and dexterity for various industrial applications.
- FORTIX™ Technology: Delivers improved grip and increased durability.
- ERGOFORM™ Technology: Engineered to reduce muscle strain during prolonged use.
- ZONZ™ Technology: Offers optimal comfort for extended wear.
- Oeko-Tex® Certified: Ensures the gloves are free from harmful substances.
- Silicone-Free: Suitable for environments where silicone contamination is a concern.
- Cut-Resistant: Provides protection against cuts, incorporating INTERCEPT Technology.
- Ergonomic Design: Conforms to the hand for a natural fit and reduced hand fatigue.
- Foam Nitrile Coating: Offers excellent grip in dry and light oil conditions, along with abrasion resistance.
Image 2.1: A close-up of the HyFlex glove, pointing out the FORTIX™ Technology for grip and durability, ERGOFORM™ Technology for muscle strain reduction, and ZONZ™ Technology for comfort.
3. Intended Use and Applications
These gloves are designed for industrial and professional use, providing hand protection in a wide range of tasks requiring dexterity and abrasion resistance. They are suitable for:
- Aerospace
- Automotive (maintenance, aftermarket, fabrication)
- Machinery and Equipment operation
- Metal Fabrication
- Food Processing
- Oil and Gas
- Utilities
- Warehousing and Logistics
- Small Engine Repair
- Gardening and Landscaping
- Packing and Assembly
Image 3.1: A visual representation of the HyFlex gloves being used in diverse settings such as warehousing, automotive work, machinery operation, and metal fabrication.
4. Sizing Guide
To ensure proper fit and optimal performance, measure your hand circumference and refer to the sizing chart below.
- Measure the circumference of your palm at its widest point, excluding the thumb.
- Compare your measurement to the chart to find your corresponding glove size.
Image 4.1: A detailed diagram illustrating how to measure hand circumference and a corresponding chart to determine the correct glove size (5-2XS to 12-3XL).
Note: This chart is intended to be used as a guide only. Individual fit may vary.
5. Usage Instructions
Follow these guidelines for effective and safe use of your HyFlex Ansell 11-840 gloves:
- Selection: Choose the correct glove size for a snug, comfortable fit that allows for full dexterity.
- Donning: Pull the gloves on carefully, ensuring fingers are fully seated in each digit. The elastic cuff should sit comfortably around the wrist.
- Inspection: Before each use, inspect gloves for any signs of damage, tears, punctures, or excessive wear. Do not use damaged gloves.
- Application: Use the gloves for tasks requiring abrasion resistance, grip, and dexterity in dry or light oil conditions.
- Limitations: These gloves are not designed for protection against extreme heat, cold, or heavy chemical exposure. Always assess the specific hazards of your task.
Image 5.1: A user demonstrating the dexterity and fit of the HyFlex gloves while performing intricate work on a small engine, highlighting the ergonomic design and cut resistance.
6. Care and Maintenance
Proper care extends the life of your gloves and maintains their protective qualities:
- Cleaning: If soiled, gently wipe the gloves with a damp cloth. For heavier soiling, hand wash with mild soap and water. Avoid harsh detergents or bleach.
- Drying: Air dry thoroughly away from direct heat or sunlight. Do not tumble dry.
- Storage: Store gloves in a cool, dry place, away from direct sunlight, extreme temperatures, and corrosive substances.
- Disposal: Dispose of worn-out or damaged gloves according to local regulations.
7. Safety Information
- These gloves are intended to provide protection against mechanical risks such as abrasion and minor cuts. They are not impervious to all hazards.
- Always assess the specific risks of your work environment and ensure these gloves provide adequate protection.
- Discontinue use immediately if gloves show signs of damage or if you experience any discomfort or allergic reaction.
- Keep out of reach of children.
8. Specifications
| Brand | HyFlex |
| Model Number | 11-840 |
| Material | Nylon, Spandex |
| Coating | Nitrile Foam |
| Protection Features | Abrasion-resistant, Cut-resistant (INTERCEPT Technology), Enhanced Grip (FORTIX™) |
| Comfort Features | Ergonomic Design (ERGOFORM™), Optimal Comfort (ZONZ™) |
| Certifications | Oeko-Tex® certified harm-free |
| Origin | Imported |
9. Troubleshooting
- Reduced Grip: If grip performance decreases, ensure gloves are clean and dry. Excessive oil or grease may reduce grip.
- Discomfort/Irritation: Ensure the correct size is being worn. If irritation persists, discontinue use and consult a medical professional.
- Damage: If gloves become torn, punctured, or show significant wear, replace them immediately to maintain protection levels.
10. Warranty and Support
For information regarding product warranty or customer support, please refer to the official HyFlex website or contact your authorized distributor. Keep your purchase receipt as proof of purchase.