Introduction
This manual provides comprehensive instructions for the realme Buds T200 True Wireless Stereo (TWS) Earbuds. It covers product setup, operation, maintenance, and troubleshooting to ensure optimal performance and user experience. The realme Buds T200 feature Hi-Res Audio with LDAC support, 32dB Active Noise Cancellation, a 12.4mm dynamic bass driver, and an IP55 dust and water resistance rating.

Image: realme Buds T200 earbuds and charging case, showcasing the green color variant.
Package Contents
Verify that all items are present in the package:
- realme Buds T200 Earbuds (Left and Right)
- Charging Case
- USB Type-C Charging Cable
- Ear Cushions (various sizes)
- User Manual (this document)
Product Overview
Familiarize yourself with the components of your realme Buds T200.

Image: The realme Buds T200 earbuds placed inside their open charging case, showing the internal layout and charging contacts.
Earbuds
- Touch Control Area: For managing playback, calls, and ANC modes.
- Microphone: For calls and Active Noise Cancellation.
- Charging Contacts: Connects with the charging case.
- Ear Tip: Provides a secure fit and sound isolation.

Image: Close-up view of the left and right realme Buds T200 earbuds, highlighting their ergonomic design and ear tips.
Charging Case
- Charging Port: USB Type-C port for charging the case.
- Indicator Light: Displays charging status and battery level.
- Pairing Button: Used for initiating Bluetooth pairing.

Image: The realme Buds T200 charging case in its closed state, showing its compact and smooth design.
Setup
1. Charging the Earbuds and Case
Before first use, fully charge the realme Buds T200.
- Place both earbuds into the charging case.
- Connect the USB Type-C charging cable to the charging port on the case and to a power source.
- The indicator light on the case will show the charging status. A solid light typically indicates charging, and it will turn off or change color when fully charged.
The earbuds offer up to 50 hours of total playback time with multiple charges from the case.
2. Pairing with a Device
To connect your realme Buds T200 to a new device:
- Ensure the earbuds are in the charging case and the lid is open.
- Press and hold the pairing button on the charging case for a few seconds until the indicator light flashes, indicating pairing mode.
- On your device (smartphone, tablet, etc.), go to Bluetooth settings and enable Bluetooth.
- Search for "realme Buds T200" in the list of available devices and select it to connect.
- Once connected, the indicator light on the case will stop flashing.
The earbuds will automatically reconnect to the last paired device when taken out of the case, if Bluetooth is enabled on the device.
3. Wearing the Earbuds
For optimal sound quality and comfort, choose the correct ear tip size and wear the earbuds properly.
- Select the ear tips that provide a snug fit and good seal in your ear canal.
- Insert the earbuds into your ears and gently twist them until they feel secure and comfortable.
- Ensure the microphone is facing downwards for clear call quality.
Operating Instructions
Touch Controls
The realme Buds T200 feature intuitive touch controls on each earbud.
| Action | Function |
|---|---|
| Double Tap (Left or Right Earbud) | Play/Pause music, Answer/End call |
| Triple Tap (Right Earbud) | Next track |
| Triple Tap (Left Earbud) | Previous track |
| Press and Hold (Left or Right Earbud) | Switch Noise Control Mode (ANC On / Transparency / ANC Off) |
| Press and Hold Both Earbuds | Enter/Exit Gaming Mode (if supported by device/app) |
Note: Specific touch control functions may be customizable via the realme Link app.
Active Noise Cancellation (ANC)
The realme Buds T200 feature 32dB Active Noise Cancellation to reduce ambient noise.
- ANC On: Reduces external noise for an immersive listening experience.
- Transparency Mode: Allows you to hear your surroundings without removing the earbuds.
- ANC Off: Standard audio mode without noise cancellation.
Cycle through these modes by pressing and holding either earbud's touch control area.
Hi-Res Audio with LDAC
The realme Buds T200 support Hi-Res Audio via LDAC codec for high-quality wireless audio transmission.
- Ensure your connected device supports the LDAC Bluetooth codec.
- Activate LDAC in your device's Bluetooth settings or developer options for the realme Buds T200.
- Use high-resolution audio files for the best listening experience.
Maintenance
Cleaning
Regular cleaning helps maintain sound quality and hygiene.
- Use a soft, dry, lint-free cloth to wipe the earbuds and charging case.
- Remove ear tips and clean them with mild soap and water, then dry thoroughly before reattaching.
- Gently clean the charging contacts on both the earbuds and the case with a dry cotton swab.
- Avoid using abrasive materials, alcohol, or chemical cleaners.
Storage
Store the earbuds properly to prevent damage.
- Always store the earbuds in their charging case when not in use.
- Keep the case and earbuds in a cool, dry place, away from direct sunlight and extreme temperatures.
Water Resistance (IP55)
The realme Buds T200 are rated IP55 for dust and water resistance.
- This rating means the earbuds are protected against limited dust ingress and low-pressure water jets from any direction.
- They are suitable for workouts and light rain, but are not designed for swimming, showering, or submersion in water.
- The charging case is not water resistant.
- Ensure earbuds are completely dry before placing them back into the charging case to prevent damage.
Troubleshooting
If you encounter issues with your realme Buds T200, refer to the following common solutions:
| Problem | Solution |
|---|---|
| Earbuds not pairing |
|
| No sound from one earbud |
|
| Poor sound quality |
|
| ANC not working effectively |
|
| Charging issues |
|
Specifications
| Feature | Detail |
|---|---|
| Model Name | realme T200 |
| Model Number | RMA2410 |
| Connectivity | Bluetooth 5.3 |
| Bluetooth Range | Up to 10 meters (33 feet) |
| Audio Driver Size | 12.4mm Dynamic Bass Driver |
| Noise Control | Active Noise Cancellation (32dB) |
| Audio Codecs | LDAC, SBC, AAC (LDAC for Hi-Res Audio) |
| Battery Life | Up to 50 hours (total with charging case) |
| Charging Port | USB Type-C |
| Water Resistance | IP55 (Earbuds only) |
| Control Method | Touch |
| Weight | Approximately 4 ounces (total product) |
| Material | Plastic |
| Included Components | Charging Station, Ear Cushions |
Safety Information
Please read the following safety guidelines before using your realme Buds T200:
- Avoid listening at high volume levels for extended periods to prevent hearing damage.
- Do not use the earbuds in situations where inability to hear surroundings could be dangerous (e.g., driving, cycling, walking in traffic).
- Keep the product away from extreme temperatures, humidity, and corrosive substances.
- Do not attempt to disassemble or modify the product. This may void the warranty and cause damage.
- Dispose of the product and its battery responsibly according to local regulations.
- Keep out of reach of children and pets. Small parts may pose a choking hazard.
Warranty and Support
For warranty information, technical support, or further assistance, please refer to the official realme website or contact realme customer service.
Online Support: Visit realme Global Support for FAQs, software updates, and contact options.
Please retain your proof of purchase for warranty claims.