1. Introduction
This instruction manual provides detailed guidance for the assembly, operation, and maintenance of your Yaheetech Double Bed Base. Designed for durability and ease of use, this metal bed frame offers a stable foundation for your mattress and ample under-bed storage. Please read these instructions carefully before beginning assembly and retain them for future reference.
Image 1: Yaheetech Double Bed Base in a bedroom with storage baskets underneath.
2. Important Safety Information
- We recommend that 2 or more people participate in the assembly process to ensure safety and ease.
- The estimated assembly time is approximately 1 hour.
- This product is not intended for use by children.
- Keep the product away from fire or other heat sources.
- We recommend wearing protective gloves during assembly to prevent injury.
- Always follow the instruction manual carefully and use a protective pad or blanket on the floor during assembly to prevent damage to the product or your flooring.
Image 2: Important safety and handling instructions.
3. Package Contents
The package includes all necessary components, accessories, and detailed instructions for assembly. Please verify that all parts are present before beginning assembly.
- Metal Bed Frame Components
- Support Slats
- Assembly Hardware (bolts, screws, nuts, etc.)
- Instruction Manual
4. Setup and Assembly
The Yaheetech Double Bed Base is designed for straightforward assembly, typically completed within an hour. The bed base is divided into sections, which simplifies handling and transportation. Follow the steps below for proper assembly:
- Unpack all components and lay them out on a protected surface. Refer to the parts list in your included manual to identify each piece.
- Begin by connecting the main frame sections. Ensure that the pre-drilled holes on the legs, intended for headboard attachment, are facing the desired head end of the bed.
- Securely fasten all connections using the provided hardware. Do not overtighten until all parts are loosely connected.
- Install the support slats across the frame. Ensure they are properly seated and secured to provide a stable mattress foundation.
- Once all components are in place, fully tighten all bolts and screws.
Image 3: Visual guide for connecting metal tubes during assembly.
Image 4: Close-up view of key features: anti-slip stoppers, foldable structure, solid metal slats, and pre-drilled holes for a headboard.
Image 5: Detail of pre-drilled holes on the bed frame legs for optional headboard attachment.
5. Operating Instructions
The Yaheetech Double Bed Base is designed to provide a stable and silent foundation for your mattress without the need for a box spring. Simply place your mattress directly onto the assembled bed base.
- Mattress Placement: Position your mattress centrally on the bed base. The integrated anti-slip panels on the sides are designed to keep the mattress stable and prevent movement.
- Under-Bed Storage: The bed base offers a generous 37.5 cm (approximately 14.7 inches) of clearance underneath, providing ample space for storage boxes, luggage, or other items.
Image 6: Detail of the anti-slip stoppers designed to keep the mattress in place.
Image 7: The bed base is designed for direct mattress placement, eliminating the need for a box spring.
6. Maintenance
Regular maintenance will help prolong the life and appearance of your bed base.
- Cleaning: Use a soft, clean cloth or sponge to gently wipe the outer surface of the product to remove dust and dirt.
- Avoid Harsh Cleaners: Do not use chemical cleaners or harsh solvents, as these can damage the finish and appearance of the product.
- Hardware Inspection: Inspect all fittings (bolts, screws, nuts, etc.) every 3 months. Re-tighten them as needed to maintain structural integrity and prevent noise.
- Sunlight Exposure: Avoid prolonged direct sunlight exposure, which can affect the material over time.
- Damage: If the product shows structural damage or poses a safety hazard, discontinue use immediately. Contact customer support for assistance.
Image 8: General furniture care instructions.
7. Troubleshooting
- Noise from the Bed Base: If you experience squeaking or creaking, ensure all assembly bolts and screws are securely tightened. Refer to the maintenance section for regular inspection and tightening.
- Mattress Slippage: The bed base is equipped with anti-slip panels. If your mattress is still slipping, ensure it is centered correctly on the frame and that the anti-slip features are not obstructed.
- Instability: If the bed base feels unstable, re-check all connections to ensure they are properly assembled and tightened according to the instructions. Verify that all legs are making even contact with the floor.
8. Specifications
| Model Number | 615072 |
| Brand | Yaheetech |
| Size (L x W x H) | 160 cm x 200 cm x 41.5 cm (63.58"L x 79.13"W x 16.34"H) |
| Item Weight | 42 pounds (approximately 19 kg) |
| Load Capacity | Up to 363 kg (800 lbs) |
| Under-Bed Clearance | 37.5 cm (approximately 14.7 inches) |
| Assembly Required | Yes |
| Included Components | Slat |
Image 9: Detailed dimensions of the bed base.
Image 10: Visual representation of the 37.5 cm under-bed clearance for storage.
9. Warranty Information
For specific warranty details regarding your Yaheetech Double Bed Base, please refer to the documentation included with your purchase or visit the official Yaheetech website. Warranty terms and conditions may vary by region and retailer.
10. Customer Support
If you have any questions, require assistance with assembly, or encounter any issues with your Yaheetech Double Bed Base, please contact Yaheetech customer service. When contacting support, please have your model number (615072) and purchase information readily available.
You can typically find contact information on the official Yaheetech website or through your retailer.
