Introduction
The M-VAVE iG-10DMini is a compact and versatile portable guitar amplifier designed for practice, jamming, and small performances. It features a 10W (20W peak) output with dual 1.75-inch speakers, offering clear stereo sound. Integrated with a drum machine providing 30 rhythms, Bluetooth connectivity, Clean and Overdrive modes, and AUX/headphone inputs, this amplifier is an ideal companion for guitarists of all levels.
Image: The M-VAVE iG-10DMini amplifier, showcasing its compact design and controls, positioned next to the fretboard of an electric guitar.
Setup
1. Charging the Device
The iG-10DMini is equipped with a 2000mAh lithium battery. Before first use, ensure the device is fully charged.
- Connect the supplied USB-C cable to the amplifier's USB-C port.
- Connect the other end of the cable to a 5V 1A USB power adapter (not included) or a power bank.
- The LED indicator will flash while charging and turn solid when fully charged. A full charge takes approximately 2 hours and provides 3 to 4 hours of continuous use.
Image: A visual representation of the amplifier's charging process, highlighting the USB-C port, charging time (approx. 2 hours), and usage duration (3-4 hours).
2. Connecting Your Guitar
Insert your guitar's 1/4-inch instrument cable into the 'INPUT' jack on the front panel of the amplifier.
3. Connecting External Audio (AUX)
To play along with backing tracks from your smartphone, tablet, or PC, connect a 3.5mm audio cable from your device's headphone output to the 'AUX IN' port on the rear panel of the amplifier.
4. Using Headphones
For silent practice, plug your 3.5mm headphones into the 'PHONES' output jack on the rear panel. Connecting headphones will automatically mute the amplifier's speakers.
Image: A detailed view of the amplifier's rear panel, illustrating the AUX input for external audio devices and the headphone output for private listening.
5. Bluetooth Pairing
The iG-10DMini features Bluetooth V5.3 for wireless audio streaming.
- Turn on the amplifier. The blue Bluetooth LED will flash, indicating it's ready for pairing.
- On your audio device (smartphone, tablet), enable Bluetooth and search for 'iG-10DMini'.
- Select 'iG-10DMini' to pair. The blue LED will become solid when successfully connected.
- To disconnect Bluetooth, press and hold the 'TAP' button for 0.5 seconds.
Image: The amplifier displaying its Bluetooth connectivity, with a smartphone screen showing the 'iG-10DMini' device available for pairing.
Operating Instructions
1. Power On/Off
Press and hold the power button (located on the front panel) for a few seconds to turn the amplifier on or off. The red LED indicates power status.
2. Guitar Tone Controls
- Clean/Overdrive Switch: Use the physical switch to toggle between crystal clear Clean and warm Overdrive tones.
- Gain Knob: Adjusts the intensity of your guitar signal, particularly affecting the amount of distortion in Overdrive mode.
- Tone Knob: Regulates the bass and treble frequencies, allowing you to shape your sound from darker to brighter.
3. Drum Machine Function
The iG-10DMini includes a built-in drum machine with 30 rhythms.
- Drum Button:
- Single press: Turns the drum machine on or off.
- Triple press: Activates TAP tempo mode. Tap the button three times at your desired tempo to set the rhythm speed.
- Long press: Restarts Bluetooth (as mentioned in Setup).
- Multifunction Encoder (TAP/RHYTHM/VOL): This knob controls various drum machine parameters.
- Rotate to adjust the drum volume.
- Press to cycle through the 30 available rhythms. The red/green LEDs indicate the current function or rhythm selection.
Image: A detailed view of the amplifier's drum machine section, illustrating the controls for rhythm selection, volume adjustment, and TAP tempo functionality.
4. Reverb Effect
The multifunction encoder also allows adjustment of the atmospheric reverberation effect. Rotate the encoder to increase or decrease the reverb level.
Image: A clear diagram of the amplifier's front panel, with labels indicating the function of each knob and button, including input, power, Clean/Overdrive switch, Gain, Tone, and the multifunction encoder for drum and reverb controls.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the amplifier's exterior. Avoid using abrasive cleaners or solvents.
- Storage: Store the amplifier in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. If storing for an extended period, charge the battery to approximately 50% every few months.
- Handling: Handle the amplifier with care. Avoid dropping it or subjecting it to strong impacts.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from guitar | Amplifier not powered on; Guitar cable not fully inserted; Volume knobs turned down; Headphones connected. | Ensure amplifier is on; Check guitar cable connection; Increase guitar and master volume; Disconnect headphones if using speakers. |
| No sound from AUX input | AUX cable not fully inserted; External device volume too low; Incorrect input selected (though iG-10DMini auto-detects). | Check AUX cable connection; Increase volume on external device. |
| Bluetooth not connecting | Bluetooth not enabled on device; Amplifier not in pairing mode; Interference. | Ensure Bluetooth is on and visible on your device; Long press the 'TAP' button to restart Bluetooth on the amplifier; Move closer to the amplifier. |
| Drum machine not working | Drum machine off; Volume too low. | Single press the 'Drum' button to turn it on; Rotate the multifunction encoder to increase drum volume. |
| Amplifier not charging | USB-C cable faulty; Power adapter insufficient; Port damaged. | Try a different USB-C cable; Use a 5V 1A (or higher) USB power adapter; Contact support if problem persists. |
Specifications
| Rated Power Output | 10 Watts (20W Peak) |
| Speakers | 2 x 1.75-inch Full-Range |
| Frequency Response | 40 Hz - 16 KHz |
| Battery | 3.7V / 2000mAh Lithium |
| Charging Time | Approx. 2 hours (via USB 5V 1000mA) |
| Usage Time | 3 to 4 hours |
| Bluetooth Version | V5.3 (Effective range up to 15 meters in obstacle-free environment) |
| Guitar Input | 1/4-inch Jack (Impedance: 1 MΩ) |
| AUX Input | 3.5mm Jack (Impedance: 10 KΩ) |
| Headphone Output | 3.5mm Jack |
| Built-in Effects | Clean, Overdrive, Reverb, Drum Machine (30 rhythms) |
| Dimensions (L x W x H) | 16 cm x 11 cm x 10 cm |
| Weight | 500 g |
Image: A visual summary of the M-VAVE iG-10DMini's technical specifications, including dimensions, power, and connectivity details.
Warranty
The M-VAVE iG-10DMini Portable Guitar Amplifier comes with a standard manufacturer's warranty. Please refer to the warranty information provided in the product packaging or contact your retailer for specific details regarding warranty coverage and duration.
Support
For further assistance, technical support, or inquiries regarding your M-VAVE iG-10DMini amplifier, please visit the official M-VAVE website or contact their customer service department. Contact information can typically be found on the product packaging or the manufacturer's website.
