Introduction
Thank you for choosing the Bsemax Automatic Wet Food Cat Feeder. This device is designed to provide your pets with fresh, timed meals, ensuring their well-being even when you are away. Please read this manual carefully before use to ensure proper operation and maintenance.
Product Overview
The Bsemax Automatic Wet Food Cat Feeder features four compartments, each with a capacity of 240mL (approximately 100-120g of pet food). It includes two integrated ice crystal boxes to maintain food freshness.
Components:
- Main Feeder Unit
- Removable Food Tray (4 compartments)
- Lid
- 2 Ice Crystal Boxes
- Instruction Manual
Image: The feeder's four compartments can hold various types of food, including fresh, canned, freeze-dried, dry food, and snacks.
Image: Dimensions of the ice crystal pack, measuring 20.3 cm (8 inches) in length, 11.7 cm (4.6 inches) in width, and 1.7 cm (0.66 inches) in thickness.
Setup
- Unpack Components: Carefully remove all items from the packaging.
- Prepare Ice Packs: Place the two ice crystal boxes in a freezer for at least 6 hours before initial use. This ensures optimal cooling performance.
- Install Batteries: The feeder requires 4 AA alkaline batteries (not included). Open the battery compartment on the underside of the main unit and insert the batteries, ensuring correct polarity.
Image: The feeder operates on 4 AA alkaline batteries, providing an extended battery life.
- Assemble Feeder: Place the frozen ice crystal boxes into their designated slots within the main unit. Then, place the removable food tray on top of the ice boxes.
- Fill Food Compartments: Distribute your pet's wet or dry food into the four compartments of the food tray. Each compartment holds 240mL.
- Secure Lid: Place the lid securely on the feeder.
- Placement: Position the feeder in a suitable location. Since it is battery-operated and does not require Wi-Fi, it can be placed anywhere in your home.
Image: The feeder's cordless and Wi-Fi-free design allows flexible placement in various rooms.
Operating Instructions
Setting the Time and Feeding Schedule:
The feeder allows you to set up to 4 feeding times using either a 12-hour or 24-hour system. Refer to the detailed instructions in the included manual for specific button functions (e.g., 'SET', '+', '-') to program meal times.
- Press the 'SET' button to enter programming mode.
- Use the '+' and '-' buttons to adjust hours and minutes for each meal.
- Confirm each setting by pressing 'SET' again.
- The LED display will show the remaining power, allowing you to monitor battery status.
Ensuring Food Freshness with Ice Packs:
Image: The ice packs provide up to 8 hours of zero-degree freshness and 9-24 hours of low-temperature preservation for pet food.
Image: The two ice crystal packs are placed beneath the food tray to maintain freshness.
- Ensure the ice crystal boxes are fully frozen before each use.
- Frozen ice packs can maintain food freshness at approximately 0°C (32°F) for 1-8 hours, and at a low temperature for 9-24 hours, depending on ambient conditions.
- For continuous freshness, replace thawed ice packs with frozen ones as needed.
Maintenance and Cleaning
Regular cleaning ensures hygiene and extends the life of your feeder.
- Disassembly: Remove the lid and the food tray from the main unit.
- Cleaning Food Tray and Lid: The food tray and lid are removable and dishwasher safe. Alternatively, wash them by hand with warm, soapy water and rinse thoroughly.
- Cleaning Main Unit: The main unit, which contains electronic components, is not washable. Wipe it clean with a damp rag. Do not submerge it in water or expose it to excessive moisture.
- Reassembly: Ensure all parts are completely dry before reassembling the feeder.
Image: The feeder's food tray and lid are removable and washable, while the main unit should be wiped clean.
Safety Information
- Anti-Kick Safety Design: The feeder is equipped with a safety mechanism that stops rotation immediately if a pet's paw or claw is detected. Operation resumes once the obstruction is removed.
Image: The feeder incorporates active identification technology to prevent pet pinching and accidental button presses.
- Battery Operation: The feeder operates on batteries, eliminating the risk of pets tripping over power cords and ensuring functionality during power outages.
- Adult Supervision: While designed for safety, always supervise young pets during their initial interactions with the feeder.
- Indoor Use Only: This product is intended for indoor use. Do not expose it to rain or extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Feeder does not turn on. | Batteries are dead or incorrectly installed. | Replace with new AA alkaline batteries, ensuring correct polarity. |
| Food tray does not rotate. | Low battery power; Obstruction in the rotation mechanism; Safety sensor activated. | Check battery level and replace if low. Ensure no food debris or foreign objects are blocking the tray. Remove any pet paws or objects triggering the safety sensor. |
| Food is not staying fresh. | Ice packs are not frozen or have thawed completely. | Ensure ice crystal boxes are frozen for at least 6 hours before use. Replace thawed ice packs with freshly frozen ones. |
| Display is blank or flickering. | Low battery power. | Replace batteries. |
Specifications
- Model: B0FG7XM7N7
- Brand: Bsemax
- Capacity: 4 compartments, 240mL each (approx. 100-120g food)
- Power Source: 4 x AA Alkaline Batteries (not included)
- Freshness Duration (with ice packs): 1-8 hours (0°C), 9-24 hours (low temperature)
- Dimensions (approx.): 31cm (12.2 inches) diameter, 7.5cm (2.9 inches) height
- ASIN: B0FG7XM7N7
Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Bsemax website. Keep your purchase receipt as proof of purchase.
Bsemax Store: Visit the Bsemax Store on Amazon
